[PATCH RFC 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>

Extracting common code, to share common code to be used later
by the AXI driver version (ad3552r-axi.c).

Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
---
 drivers/iio/dac/Makefile         |   2 +-
 drivers/iio/dac/ad3552r-common.c | 163 +++++++++++++++++++++++
 drivers/iio/dac/ad3552r.c        | 276 ++++-----------------------------------
 drivers/iio/dac/ad3552r.h        | 199 ++++++++++++++++++++++++++++
 4 files changed, 389 insertions(+), 251 deletions(-)

diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 2cf148f16306..56a125f56284 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -4,7 +4,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
-obj-$(CONFIG_AD3552R) += ad3552r.o
+obj-$(CONFIG_AD3552R) += ad3552r.o ad3552r-common.o
 obj-$(CONFIG_AD5360) += ad5360.o
 obj-$(CONFIG_AD5380) += ad5380.o
 obj-$(CONFIG_AD5421) += ad5421.o
diff --git a/drivers/iio/dac/ad3552r-common.c b/drivers/iio/dac/ad3552r-common.c
new file mode 100644
index 000000000000..c8ccfbe2e95e
--- /dev/null
+++ b/drivers/iio/dac/ad3552r-common.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2010-2024 Analog Devices Inc.
+// Copyright (c) 2024 Baylibre, SAS
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#include "ad3552r.h"
+
+static const s32 ad3552r_ch_ranges[][2] = {
+	[AD3552R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
+	[AD3552R_CH_OUTPUT_RANGE_0__5V]		= {0, 5000},
+	[AD3552R_CH_OUTPUT_RANGE_0__10V]	= {0, 10000},
+	[AD3552R_CH_OUTPUT_RANGE_NEG_5__5V]	= {-5000, 5000},
+	[AD3552R_CH_OUTPUT_RANGE_NEG_10__10V]	= {-10000, 10000}
+};
+
+static const s32 ad3542r_ch_ranges[][2] = {
+	[AD3542R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
+	[AD3542R_CH_OUTPUT_RANGE_0__3V]		= {0, 3000},
+	[AD3542R_CH_OUTPUT_RANGE_0__5V]		= {0, 5000},
+	[AD3542R_CH_OUTPUT_RANGE_0__10V]	= {0, 10000},
+	[AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V]	= {-2500, 7500},
+	[AD3542R_CH_OUTPUT_RANGE_NEG_5__5V]	= {-5000, 5000}
+};
+
+void ad3552r_calc_custom_gain(u8 p, u8 n, s16 goffs, u16 *reg)
+{
+	*reg = FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1);
+	*reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, p);
+	*reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, n);
+	*reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, abs((s32)goffs) >> 8);
+	*reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)goffs < 0);
+}
+
+int ad3552r_get_ref_voltage(struct device *dev, u32 *val)
+{
+	int voltage, delta = 100000;
+
+	voltage = devm_regulator_get_enable_read_voltage(dev, "vref");
+	if (voltage < 0 && voltage != -ENODEV)
+		return dev_err_probe(dev, voltage,
+				     "Error getting vref voltage\n");
+
+	if (voltage == -ENODEV) {
+		if (device_property_read_bool(dev, "adi,vref-out-en"))
+			*val = AD3552R_INTERNAL_VREF_PIN_2P5V;
+		else
+			*val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
+	} else {
+		if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
+			dev_warn(dev, "vref-supply must be 2.5V");
+			return -EINVAL;
+		}
+		*val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
+	}
+
+	return 0;
+}
+
+int ad3552r_get_drive_strength(struct device *dev, u32 *val)
+{
+	int err;
+
+	err = device_property_read_u32(dev, "adi,sdo-drive-strength", val);
+	if (!err && *val > 3) {
+		dev_err(dev,
+			"adi,sdo-drive-strength must be less than 4\n");
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+int ad3552r_get_custom_gain(struct device *dev, struct fwnode_handle *child,
+			    u8 *gs_p, u8 *gs_n, u16 *rfb, s16 *goffs)
+{
+	int err;
+	u32 val;
+	struct fwnode_handle *gain_child __free(fwnode_handle)
+		= fwnode_get_named_child_node(child,
+				      "custom-output-range-config");
+
+	if (!gain_child)
+		return dev_err_probe(dev, -EINVAL,
+				     "custom-output-range-config mandatory\n");
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "adi,gain-scaling-p mandatory\n");
+	*gs_p = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "adi,gain-scaling-n property mandatory\n");
+	*gs_n = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "adi,rfb-ohms mandatoryn");
+	*rfb = val;
+
+	err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "adi,gain-offset mandatory\n");
+	*goffs = val;
+
+	return 0;
+}
+
+static int ad3552r_find_range(u16 id, s32 *vals)
+{
+	int i, len;
+	const s32 (*ranges)[2];
+
+	if (id == AD3542R_ID) {
+		len = ARRAY_SIZE(ad3542r_ch_ranges);
+		ranges = ad3542r_ch_ranges;
+	} else {
+		len = ARRAY_SIZE(ad3552r_ch_ranges);
+		ranges = ad3552r_ch_ranges;
+	}
+
+	for (i = 0; i < len; i++)
+		if (vals[0] == ranges[i][0] * 1000 &&
+		    vals[1] == ranges[i][1] * 1000)
+			return i;
+
+	return -EINVAL;
+}
+
+int ad3552r_get_output_range(struct device *dev, enum ad3552r_id chip_id,
+			     struct fwnode_handle *child, u32 *val)
+{
+	int ret;
+	s32 vals[2];
+
+	if (!fwnode_property_present(child, "adi,output-range-microvolt"))
+		return -ENOENT;
+
+	ret = fwnode_property_read_u32_array(child,
+					     "adi,output-range-microvolt",
+					     vals, 2);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				"invalid adi,output-range-microvolt\n");
+
+	ret = ad3552r_find_range(chip_id, vals);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+			"invalid adi,output-range-microvolt value\n");
+
+	*val = ret;
+
+	return 0;
+}
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index d867de7c90d1..c149be9c8c7d 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -11,153 +11,9 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
-#include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
-/* Register addresses */
-/* Primary address space */
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A		0x00
-#define   AD3552R_MASK_SOFTWARE_RESET			(BIT(7) | BIT(0))
-#define   AD3552R_MASK_ADDR_ASCENSION			BIT(5)
-#define   AD3552R_MASK_SDO_ACTIVE			BIT(4)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B		0x01
-#define   AD3552R_MASK_SINGLE_INST			BIT(7)
-#define   AD3552R_MASK_SHORT_INSTRUCTION		BIT(3)
-#define AD3552R_REG_ADDR_DEVICE_CONFIG			0x02
-#define   AD3552R_MASK_DEVICE_STATUS(n)			BIT(4 + (n))
-#define   AD3552R_MASK_CUSTOM_MODES			GENMASK(3, 2)
-#define   AD3552R_MASK_OPERATING_MODES			GENMASK(1, 0)
-#define AD3552R_REG_ADDR_CHIP_TYPE			0x03
-#define   AD3552R_MASK_CLASS				GENMASK(7, 0)
-#define AD3552R_REG_ADDR_PRODUCT_ID_L			0x04
-#define AD3552R_REG_ADDR_PRODUCT_ID_H			0x05
-#define AD3552R_REG_ADDR_CHIP_GRADE			0x06
-#define   AD3552R_MASK_GRADE				GENMASK(7, 4)
-#define   AD3552R_MASK_DEVICE_REVISION			GENMASK(3, 0)
-#define AD3552R_REG_ADDR_SCRATCH_PAD			0x0A
-#define AD3552R_REG_ADDR_SPI_REVISION			0x0B
-#define AD3552R_REG_ADDR_VENDOR_L			0x0C
-#define AD3552R_REG_ADDR_VENDOR_H			0x0D
-#define AD3552R_REG_ADDR_STREAM_MODE			0x0E
-#define   AD3552R_MASK_LENGTH				GENMASK(7, 0)
-#define AD3552R_REG_ADDR_TRANSFER_REGISTER		0x0F
-#define   AD3552R_MASK_MULTI_IO_MODE			GENMASK(7, 6)
-#define   AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE		BIT(2)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C		0x10
-#define   AD3552R_MASK_CRC_ENABLE			(GENMASK(7, 6) |\
-							 GENMASK(1, 0))
-#define   AD3552R_MASK_STRICT_REGISTER_ACCESS		BIT(5)
-#define AD3552R_REG_ADDR_INTERFACE_STATUS_A		0x11
-#define   AD3552R_MASK_INTERFACE_NOT_READY		BIT(7)
-#define   AD3552R_MASK_CLOCK_COUNTING_ERROR		BIT(5)
-#define   AD3552R_MASK_INVALID_OR_NO_CRC		BIT(3)
-#define   AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER	BIT(2)
-#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS		BIT(1)
-#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID		BIT(0)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D		0x14
-#define   AD3552R_MASK_ALERT_ENABLE_PULLUP		BIT(6)
-#define   AD3552R_MASK_MEM_CRC_EN			BIT(4)
-#define   AD3552R_MASK_SDO_DRIVE_STRENGTH		GENMASK(3, 2)
-#define   AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN		BIT(1)
-#define   AD3552R_MASK_SPI_CONFIG_DDR			BIT(0)
-#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG		0x15
-#define   AD3552R_MASK_IDUMP_FAST_MODE			BIT(6)
-#define   AD3552R_MASK_SAMPLE_HOLD_DIFFERENTIAL_USER_EN	BIT(5)
-#define   AD3552R_MASK_SAMPLE_HOLD_USER_TRIM		GENMASK(4, 3)
-#define   AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE		BIT(2)
-#define   AD3552R_MASK_REFERENCE_VOLTAGE_SEL		GENMASK(1, 0)
-#define AD3552R_REG_ADDR_ERR_ALARM_MASK			0x16
-#define   AD3552R_MASK_REF_RANGE_ALARM			BIT(6)
-#define   AD3552R_MASK_CLOCK_COUNT_ERR_ALARM		BIT(5)
-#define   AD3552R_MASK_MEM_CRC_ERR_ALARM		BIT(4)
-#define   AD3552R_MASK_SPI_CRC_ERR_ALARM		BIT(3)
-#define   AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM		BIT(2)
-#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM	BIT(1)
-#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM	BIT(0)
-#define AD3552R_REG_ADDR_ERR_STATUS			0x17
-#define   AD3552R_MASK_REF_RANGE_ERR_STATUS			BIT(6)
-#define   AD3552R_MASK_DUAL_SPI_STREAM_EXCEEDS_DAC_ERR_STATUS	BIT(5)
-#define   AD3552R_MASK_MEM_CRC_ERR_STATUS			BIT(4)
-#define   AD3552R_MASK_RESET_STATUS				BIT(0)
-#define AD3552R_REG_ADDR_POWERDOWN_CONFIG		0x18
-#define   AD3552R_MASK_CH_DAC_POWERDOWN(ch)		BIT(4 + (ch))
-#define   AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch)	BIT(ch)
-#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE		0x19
-#define   AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch)		((ch) ? GENMASK(7, 4) :\
-							 GENMASK(3, 0))
-#define AD3552R_REG_ADDR_CH_OFFSET(ch)			(0x1B + (ch) * 2)
-#define   AD3552R_MASK_CH_OFFSET_BITS_0_7		GENMASK(7, 0)
-#define AD3552R_REG_ADDR_CH_GAIN(ch)			(0x1C + (ch) * 2)
-#define   AD3552R_MASK_CH_RANGE_OVERRIDE		BIT(7)
-#define   AD3552R_MASK_CH_GAIN_SCALING_N		GENMASK(6, 5)
-#define   AD3552R_MASK_CH_GAIN_SCALING_P		GENMASK(4, 3)
-#define   AD3552R_MASK_CH_OFFSET_POLARITY		BIT(2)
-#define   AD3552R_MASK_CH_OFFSET_BIT_8			BIT(0)
-/*
- * Secondary region
- * For multibyte registers specify the highest address because the access is
- * done in descending order
- */
-#define AD3552R_SECONDARY_REGION_START			0x28
-#define AD3552R_REG_ADDR_HW_LDAC_16B			0x28
-#define AD3552R_REG_ADDR_CH_DAC_16B(ch)			(0x2C - (1 - ch) * 2)
-#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B		0x2E
-#define AD3552R_REG_ADDR_CH_SELECT_16B			0x2F
-#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B		0x31
-#define AD3552R_REG_ADDR_SW_LDAC_16B			0x32
-#define AD3552R_REG_ADDR_CH_INPUT_16B(ch)		(0x36 - (1 - ch) * 2)
-/* 3 bytes registers */
-#define AD3552R_REG_START_24B				0x37
-#define AD3552R_REG_ADDR_HW_LDAC_24B			0x37
-#define AD3552R_REG_ADDR_CH_DAC_24B(ch)			(0x3D - (1 - ch) * 3)
-#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B		0x40
-#define AD3552R_REG_ADDR_CH_SELECT_24B			0x41
-#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B		0x44
-#define AD3552R_REG_ADDR_SW_LDAC_24B			0x45
-#define AD3552R_REG_ADDR_CH_INPUT_24B(ch)		(0x4B - (1 - ch) * 3)
-
-/* Useful defines */
-#define AD3552R_MAX_CH					2
-#define AD3552R_MASK_CH(ch)				BIT(ch)
-#define AD3552R_MASK_ALL_CH				GENMASK(1, 0)
-#define AD3552R_MAX_REG_SIZE				3
-#define AD3552R_READ_BIT				BIT(7)
-#define AD3552R_ADDR_MASK				GENMASK(6, 0)
-#define AD3552R_MASK_DAC_12B				0xFFF0
-#define AD3552R_DEFAULT_CONFIG_B_VALUE			0x8
-#define AD3552R_SCRATCH_PAD_TEST_VAL1			0x34
-#define AD3552R_SCRATCH_PAD_TEST_VAL2			0xB2
-#define AD3552R_GAIN_SCALE				1000
-#define AD3552R_LDAC_PULSE_US				100
-
-enum ad3552r_ch_vref_select {
-	/* Internal source with Vref I/O floating */
-	AD3552R_INTERNAL_VREF_PIN_FLOATING,
-	/* Internal source with Vref I/O at 2.5V */
-	AD3552R_INTERNAL_VREF_PIN_2P5V,
-	/* External source with Vref I/O as input */
-	AD3552R_EXTERNAL_VREF_PIN_INPUT
-};
-
-enum ad3552r_id {
-	AD3541R_ID = 0x400b,
-	AD3542R_ID = 0x4009,
-	AD3551R_ID = 0x400a,
-	AD3552R_ID = 0x4008,
-};
-
-enum ad3552r_ch_output_range {
-	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
-	AD3552R_CH_OUTPUT_RANGE_0__2P5V,
-	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
-	AD3552R_CH_OUTPUT_RANGE_0__5V,
-	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
-	AD3552R_CH_OUTPUT_RANGE_0__10V,
-	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
-	AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
-	/* Range from -10 V to 10 V. Requires Rfb4x connection  */
-	AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
-};
+#include "ad3552r.h"
 
 static const s32 ad3552r_ch_ranges[][2] = {
 	[AD3552R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
@@ -167,21 +23,6 @@ static const s32 ad3552r_ch_ranges[][2] = {
 	[AD3552R_CH_OUTPUT_RANGE_NEG_10__10V]	= {-10000, 10000}
 };
 
-enum ad3542r_ch_output_range {
-	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
-	AD3542R_CH_OUTPUT_RANGE_0__2P5V,
-	/* Range from 0 V to 3 V. Requires Rfb1x connection  */
-	AD3542R_CH_OUTPUT_RANGE_0__3V,
-	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
-	AD3542R_CH_OUTPUT_RANGE_0__5V,
-	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
-	AD3542R_CH_OUTPUT_RANGE_0__10V,
-	/* Range from -2.5 V to 7.5 V. Requires Rfb2x connection  */
-	AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
-	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
-	AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
-};
-
 static const s32 ad3542r_ch_ranges[][2] = {
 	[AD3542R_CH_OUTPUT_RANGE_0__2P5V]	= {0, 2500},
 	[AD3542R_CH_OUTPUT_RANGE_0__3V]		= {0, 3000},
@@ -733,72 +574,32 @@ static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
 	dac->ch_data[ch].offset_dec = div_s64(tmp, span);
 }
 
-static int ad3552r_find_range(const struct ad3552r_model_data *model_data,
-			      s32 *vals)
-{
-	int i;
-
-	for (i = 0; i < model_data->num_ranges; i++)
-		if (vals[0] == model_data->ranges_table[i][0] * 1000 &&
-		    vals[1] == model_data->ranges_table[i][1] * 1000)
-			return i;
-
-	return -EINVAL;
-}
-
 static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
 					 struct fwnode_handle *child,
 					 u32 ch)
 {
 	struct device *dev = &dac->spi->dev;
-	u32 val;
 	int err;
 	u8 addr;
-	u16 reg = 0, offset;
-
-	struct fwnode_handle *gain_child __free(fwnode_handle)
-		= fwnode_get_named_child_node(child,
-					      "custom-output-range-config");
-	if (!gain_child)
-		return dev_err_probe(dev, -EINVAL,
-				     "mandatory custom-output-range-config property missing\n");
-
-	dac->ch_data[ch].range_override = 1;
-	reg |= FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1);
-
-	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
-	if (err)
-		return dev_err_probe(dev, err,
-				     "mandatory adi,gain-scaling-p property missing\n");
-	reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, val);
-	dac->ch_data[ch].p = val;
+	u16 reg = 0;
 
-	err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
+	err = ad3552r_get_custom_gain(dev, child,
+				      &dac->ch_data[ch].p,
+				      &dac->ch_data[ch].n,
+				      &dac->ch_data[ch].rfb,
+				      &dac->ch_data[ch].gain_offset);
 	if (err)
-		return dev_err_probe(dev, err,
-				     "mandatory adi,gain-scaling-n property missing\n");
-	reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, val);
-	dac->ch_data[ch].n = val;
-
-	err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
-	if (err)
-		return dev_err_probe(dev, err,
-				     "mandatory adi,rfb-ohms property missing\n");
-	dac->ch_data[ch].rfb = val;
+		return err;
 
-	err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
-	if (err)
-		return dev_err_probe(dev, err,
-				     "mandatory adi,gain-offset property missing\n");
-	dac->ch_data[ch].gain_offset = val;
+	dac->ch_data[ch].range_override = 1;
 
-	offset = abs((s32)val);
-	reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, (offset >> 8));
+	ad3552r_calc_custom_gain(dac->ch_data[ch].p, dac->ch_data[ch].n,
+				 dac->ch_data[ch].gain_offset, &reg);
 
-	reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)val < 0);
 	addr = AD3552R_REG_ADDR_CH_GAIN(ch);
 	err = ad3552r_write_reg(dac, addr,
-				offset & AD3552R_MASK_CH_OFFSET_BITS_0_7);
+				abs((s32)dac->ch_data[ch].gain_offset) &
+				AD3552R_MASK_CH_OFFSET_BITS_0_7);
 	if (err)
 		return dev_err_probe(dev, err, "Error writing register\n");
 
@@ -812,30 +613,17 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
 static int ad3552r_configure_device(struct ad3552r_desc *dac)
 {
 	struct device *dev = &dac->spi->dev;
-	int err, cnt = 0, voltage, delta = 100000;
-	u32 vals[2], val, ch;
+	int err, cnt = 0;
+	u32 val, ch;
 
 	dac->gpio_ldac = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_HIGH);
 	if (IS_ERR(dac->gpio_ldac))
 		return dev_err_probe(dev, PTR_ERR(dac->gpio_ldac),
 				     "Error getting gpio ldac");
 
-	voltage = devm_regulator_get_enable_read_voltage(dev, "vref");
-	if (voltage < 0 && voltage != -ENODEV)
-		return dev_err_probe(dev, voltage, "Error getting vref voltage\n");
-
-	if (voltage == -ENODEV) {
-		if (device_property_read_bool(dev, "adi,vref-out-en"))
-			val = AD3552R_INTERNAL_VREF_PIN_2P5V;
-		else
-			val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
-	} else {
-		if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
-			dev_warn(dev, "vref-supply must be 2.5V");
-			return -EINVAL;
-		}
-		val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
-	}
+	err = ad3552r_get_ref_voltage(dev, &val);
+	if (err)
+		return err;
 
 	err = ad3552r_update_reg_field(dac,
 				       AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
@@ -844,13 +632,10 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 	if (err)
 		return err;
 
-	err = device_property_read_u32(dev, "adi,sdo-drive-strength", &val);
+	err = ad3552r_get_drive_strength(dev, &val);
+	if (err)
+		return err;
 	if (!err) {
-		if (val > 3) {
-			dev_err(dev, "adi,sdo-drive-strength must be less than 4\n");
-			return -EINVAL;
-		}
-
 		err = ad3552r_update_reg_field(dac,
 					       AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
 					       AD3552R_MASK_SDO_DRIVE_STRENGTH,
@@ -875,21 +660,12 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
 					     "reg must be less than %d\n",
 					     dac->model_data->num_hw_channels);
 
-		if (fwnode_property_present(child, "adi,output-range-microvolt")) {
-			err = fwnode_property_read_u32_array(child,
-							     "adi,output-range-microvolt",
-							     vals,
-							     2);
-			if (err)
-				return dev_err_probe(dev, err,
-					"adi,output-range-microvolt property could not be parsed\n");
-
-			err = ad3552r_find_range(dac->model_data, vals);
-			if (err < 0)
-				return dev_err_probe(dev, err,
-						     "Invalid adi,output-range-microvolt value\n");
+		err = ad3552r_get_output_range(dev, dac->model_data->chip_id,
+					       child, &val);
+		if (err && err != -ENOENT)
+			return err;
 
-			val = err;
+		if (!err) {
 			if (ch == 0)
 				val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), val);
 			else
diff --git a/drivers/iio/dac/ad3552r.h b/drivers/iio/dac/ad3552r.h
new file mode 100644
index 000000000000..cada1f12f000
--- /dev/null
+++ b/drivers/iio/dac/ad3552r.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AD3552R Digital <-> Analog converters common header
+ *
+ * Copyright 2024 Analog Devices Inc.
+ * Author: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
+ */
+
+#ifndef __DRIVERS_IIO_DAC_AD3552R_H__
+#define __DRIVERS_IIO_DAC_AD3552R_H__
+
+/* Register addresses */
+/* Primary address space */
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A		0x00
+#define   AD3552R_MASK_SOFTWARE_RESET			(BIT(7) | BIT(0))
+#define   AD3552R_MASK_ADDR_ASCENSION			BIT(5)
+#define   AD3552R_MASK_SDO_ACTIVE			BIT(4)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B		0x01
+#define   AD3552R_MASK_SINGLE_INST			BIT(7)
+#define   AD3552R_MASK_SHORT_INSTRUCTION		BIT(3)
+#define AD3552R_REG_ADDR_DEVICE_CONFIG			0x02
+#define   AD3552R_MASK_DEVICE_STATUS(n)			BIT(4 + (n))
+#define   AD3552R_MASK_CUSTOM_MODES			GENMASK(3, 2)
+#define   AD3552R_MASK_OPERATING_MODES			GENMASK(1, 0)
+#define AD3552R_REG_ADDR_CHIP_TYPE			0x03
+#define   AD3552R_MASK_CLASS				GENMASK(7, 0)
+#define AD3552R_REG_ADDR_PRODUCT_ID_L			0x04
+#define AD3552R_REG_ADDR_PRODUCT_ID_H			0x05
+#define AD3552R_REG_ADDR_CHIP_GRADE			0x06
+#define   AD3552R_MASK_GRADE				GENMASK(7, 4)
+#define   AD3552R_MASK_DEVICE_REVISION			GENMASK(3, 0)
+#define AD3552R_REG_ADDR_SCRATCH_PAD			0x0A
+#define AD3552R_REG_ADDR_SPI_REVISION			0x0B
+#define AD3552R_REG_ADDR_VENDOR_L			0x0C
+#define AD3552R_REG_ADDR_VENDOR_H			0x0D
+#define AD3552R_REG_ADDR_STREAM_MODE			0x0E
+#define   AD3552R_MASK_LENGTH				GENMASK(7, 0)
+#define AD3552R_REG_ADDR_TRANSFER_REGISTER		0x0F
+#define   AD3552R_MASK_MULTI_IO_MODE			GENMASK(7, 6)
+#define   AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE		BIT(2)
+#define   AD3552R_MASK_DUAL_SPI				BIT(6)
+#define   AD3552R_MASK_QUAD_SPI				BIT(7)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C		0x10
+#define   AD3552R_MASK_CRC_ENABLE			(GENMASK(7, 6) |\
+							 GENMASK(1, 0))
+#define   AD3552R_MASK_STRICT_REGISTER_ACCESS		BIT(5)
+#define AD3552R_REG_ADDR_INTERFACE_STATUS_A		0x11
+#define   AD3552R_MASK_INTERFACE_NOT_READY		BIT(7)
+#define   AD3552R_MASK_CLOCK_COUNTING_ERROR		BIT(5)
+#define   AD3552R_MASK_INVALID_OR_NO_CRC		BIT(3)
+#define   AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER	BIT(2)
+#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS		BIT(1)
+#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID		BIT(0)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D		0x14
+#define   AD3552R_MASK_ALERT_ENABLE_PULLUP		BIT(6)
+#define   AD3552R_MASK_MEM_CRC_EN			BIT(4)
+#define   AD3552R_MASK_SDO_DRIVE_STRENGTH		GENMASK(3, 2)
+#define   AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN		BIT(1)
+#define   AD3552R_MASK_SPI_CONFIG_DDR			BIT(0)
+#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG		0x15
+#define   AD3552R_MASK_IDUMP_FAST_MODE			BIT(6)
+#define   AD3552R_MASK_SAMPLE_HOLD_DIFF_USER_EN		BIT(5)
+#define   AD3552R_MASK_SAMPLE_HOLD_USER_TRIM		GENMASK(4, 3)
+#define   AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE		BIT(2)
+#define   AD3552R_MASK_REFERENCE_VOLTAGE_SEL		GENMASK(1, 0)
+#define AD3552R_REG_ADDR_ERR_ALARM_MASK			0x16
+#define   AD3552R_MASK_REF_RANGE_ALARM			BIT(6)
+#define   AD3552R_MASK_CLOCK_COUNT_ERR_ALARM		BIT(5)
+#define   AD3552R_MASK_MEM_CRC_ERR_ALARM		BIT(4)
+#define   AD3552R_MASK_SPI_CRC_ERR_ALARM		BIT(3)
+#define   AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM		BIT(2)
+#define   AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM	BIT(1)
+#define   AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM	BIT(0)
+#define AD3552R_REG_ADDR_ERR_STATUS			0x17
+#define   AD3552R_MASK_REF_RANGE_ERR_STATUS		BIT(6)
+#define   AD3552R_MASK_STREAM_EXCEEDS_DAC_ERR_STATUS	BIT(5)
+#define   AD3552R_MASK_MEM_CRC_ERR_STATUS		BIT(4)
+#define   AD3552R_MASK_RESET_STATUS			BIT(0)
+#define AD3552R_REG_ADDR_POWERDOWN_CONFIG		0x18
+#define   AD3552R_MASK_CH_DAC_POWERDOWN(ch)		BIT(4 + (ch))
+#define   AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch)	BIT(ch)
+#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE		0x19
+#define   AD3552R_MASK_CH0_RANGE			GENMASK(2, 0)
+#define   AD3552R_MASK_CH1_RANGE			GENMASK(6, 4)
+#define   AD3552R_MASK_CH_OUTPUT_RANGE			GENMASK(7, 0)
+#define   AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch)		((ch) ? \
+							 GENMASK(7, 4) : \
+							 GENMASK(3, 0))
+#define AD3552R_REG_ADDR_CH_OFFSET(ch)			(0x1B + (ch) * 2)
+#define   AD3552R_MASK_CH_OFFSET_BITS_0_7		 GENMASK(7, 0)
+#define AD3552R_REG_ADDR_CH_GAIN(ch)			(0x1C + (ch) * 2)
+#define   AD3552R_MASK_CH_RANGE_OVERRIDE		BIT(7)
+#define   AD3552R_MASK_CH_GAIN_SCALING_N		GENMASK(6, 5)
+#define   AD3552R_MASK_CH_GAIN_SCALING_P		GENMASK(4, 3)
+#define   AD3552R_MASK_CH_OFFSET_POLARITY		BIT(2)
+#define   AD3552R_MASK_CH_OFFSET_BIT_8			BIT(0)
+/*
+ * Secondary region
+ * For multibyte registers specify the highest address because the access is
+ * done in descending order
+ */
+#define AD3552R_SECONDARY_REGION_START			0x28
+#define AD3552R_REG_ADDR_HW_LDAC_16B			0x28
+#define AD3552R_REG_ADDR_CH_DAC_16B(ch)			(0x2C - (1 - (ch)) * 2)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B		0x2E
+#define AD3552R_REG_ADDR_CH_SELECT_16B			0x2F
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B		0x31
+#define AD3552R_REG_ADDR_SW_LDAC_16B			0x32
+#define AD3552R_REG_ADDR_CH_INPUT_16B(ch)		(0x36 - (1 - (ch)) * 2)
+/* 3 bytes registers */
+#define AD3552R_REG_START_24B				0x37
+#define AD3552R_REG_ADDR_HW_LDAC_24B			0x37
+#define AD3552R_REG_ADDR_CH_DAC_24B(ch)			(0x3D - (1 - (ch)) * 3)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B		0x40
+#define AD3552R_REG_ADDR_CH_SELECT_24B			0x41
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B		0x44
+#define AD3552R_REG_ADDR_SW_LDAC_24B			0x45
+#define AD3552R_REG_ADDR_CH_INPUT_24B(ch)		(0x4B - (1 - (ch)) * 3)
+
+/* Useful defines */
+#define AD3552R_MAX_CH					2
+#define AD3552R_MASK_CH(ch)				BIT(ch)
+#define AD3552R_MASK_ALL_CH				GENMASK(1, 0)
+#define AD3552R_MAX_REG_SIZE				3
+#define AD3552R_READ_BIT				BIT(7)
+#define AD3552R_ADDR_MASK				GENMASK(6, 0)
+#define AD3552R_MASK_DAC_12B				GENMASK(15, 4)
+#define AD3552R_DEFAULT_CONFIG_B_VALUE			0x8
+#define AD3552R_SCRATCH_PAD_TEST_VAL1			0x34
+#define AD3552R_SCRATCH_PAD_TEST_VAL2			0xB2
+#define AD3552R_GAIN_SCALE				1000
+#define AD3552R_LDAC_PULSE_US				100
+
+#define AD3552R_AXI_REG_MAX				0x35
+#define AD3552R_REF_INIT				0x00
+#define AD3552R_STREAM_2BYTE_LOOP			0x02
+#define AD3552R_STREAM_4BYTE_LOOP			0x04
+
+#define AD3552R_CH0_ACTIVE				BIT(0)
+#define AD3552R_CH1_ACTIVE				BIT(1)
+#define AD3552R_CH0_CH1_ACTIVE				(AD3552R_CH0_ACTIVE | \
+							 AD3552R_CH1_ACTIVE)
+
+#define AD3552R_TRANSFER_INIT		(AD3552R_MASK_QUAD_SPI | \
+					 AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE)
+
+enum ad3552r_id {
+	AD3541R_ID = 0x400b,
+	AD3542R_ID = 0x4009,
+	AD3551R_ID = 0x400a,
+	AD3552R_ID = 0x4008,
+};
+
+enum ad3552r_ch_vref_select {
+	/* Internal source with Vref I/O floating */
+	AD3552R_INTERNAL_VREF_PIN_FLOATING,
+	/* Internal source with Vref I/O at 2.5V */
+	AD3552R_INTERNAL_VREF_PIN_2P5V,
+	/* External source with Vref I/O as input */
+	AD3552R_EXTERNAL_VREF_PIN_INPUT
+};
+
+enum ad3542r_ch_output_range {
+	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+	AD3542R_CH_OUTPUT_RANGE_0__2P5V,
+	/* Range from 0 V to 3 V. Requires Rfb1x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__3V,
+	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__5V,
+	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_0__10V,
+	/* Range from -2.5 V to 7.5 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
+	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
+	AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
+};
+
+enum ad3552r_ch_output_range {
+	/* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+	AD3552R_CH_OUTPUT_RANGE_0__2P5V,
+	/* Range from 0 V to 5 V. Requires Rfb1x connection  */
+	AD3552R_CH_OUTPUT_RANGE_0__5V,
+	/* Range from 0 V to 10 V. Requires Rfb2x connection  */
+	AD3552R_CH_OUTPUT_RANGE_0__10V,
+	/* Range from -5 V to 5 V. Requires Rfb2x connection  */
+	AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
+	/* Range from -10 V to 10 V. Requires Rfb4x connection  */
+	AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
+};
+
+int ad3552r_get_output_range(struct device *dev, enum ad3552r_id id,
+			     struct fwnode_handle *child, u32 *val);
+int ad3552r_get_custom_gain(struct device *dev, struct fwnode_handle *child,
+			    u8 *gs_p, u8 *gs_n, u16 *rfb, s16 *goffs);
+void ad3552r_calc_custom_gain(u8 p, u8 n, s16 goffs, u16 *reg);
+int ad3552r_get_ref_voltage(struct device *dev, u32 *val);
+int ad3552r_get_drive_strength(struct device *dev, u32 *val);
+
+#endif /* __DRIVERS_IIO_DAC_AD3552R_H__ */

-- 
2.45.0.rc1





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux