Hello,
I was believing that id tables weren't required anymore when using of tables.
Jonathan,
can you help on this subject?
If we have to add id tables, then we need to add all supported chips (missing here icm42686 and icm42688).
Thanks,
JB
________________________________________
From: Jason Liu <jasonliu10041728@xxxxxxxxx>
Sent: Sunday, August 25, 2024 08:39
To: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
Cc: jic23@xxxxxxxxxx <jic23@xxxxxxxxxx>; lars@xxxxxxxxxx <lars@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>; Jason Liu <jasonliu10041728@xxxxxxxxx>
Subject: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
This Message Is From an Untrusted Sender
You have not previously corresponded with this sender.
Add the id_table of inv_icm42600, so the device can probe correctly.
Signed-off-by: Jason Liu <jasonliu10041728@xxxxxxxxx>
---
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 15 +++++++++++++++
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 15 +++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
index ebb31b385881..8cc550b8cfc3 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -71,6 +71,20 @@ static int inv_icm42600_probe(struct i2c_client *client)
inv_icm42600_i2c_bus_setup);
}
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_icm42600_id[] = {
+ {"icm42600", INV_CHIP_ICM42600},
+ {"icm42602", INV_CHIP_ICM42602},
+ {"icm42605", INV_CHIP_ICM42605},
+ {"icm42622", INV_CHIP_ICM42622},
+ {"icm42631", INV_CHIP_ICM42631},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, inv_icm42600_id);
+
static const struct of_device_id inv_icm42600_of_matches[] = {
{
.compatible = "invensense,icm42600",
@@ -104,6 +118,7 @@ static struct i2c_driver inv_icm42600_driver = {
.of_match_table = inv_icm42600_of_matches,
.pm = pm_ptr(&inv_icm42600_pm_ops),
},
+ .id_table = inv_icm42600_id,
.probe = inv_icm42600_probe,
};
module_i2c_driver(inv_icm42600_driver);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
index eae5ff7a3cc1..5fe078ddc8a1 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
@@ -67,6 +67,20 @@ static int inv_icm42600_probe(struct spi_device *spi)
inv_icm42600_spi_bus_setup);
}
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct spi_device_id inv_icm42600_id[] = {
+ {"icm42600", INV_CHIP_ICM42600},
+ {"icm42602", INV_CHIP_ICM42602},
+ {"icm42605", INV_CHIP_ICM42605},
+ {"icm42622", INV_CHIP_ICM42622},
+ {"icm42631", INV_CHIP_ICM42631},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, inv_icm42600_id);
+
static const struct of_device_id inv_icm42600_of_matches[] = {
{
.compatible = "invensense,icm42600",
@@ -100,6 +114,7 @@ static struct spi_driver inv_icm42600_driver = {
.of_match_table = inv_icm42600_of_matches,
.pm = pm_ptr(&inv_icm42600_pm_ops),
},
+ .id_table = inv_icm42600_id,
.probe = inv_icm42600_probe,
};
module_spi_driver(inv_icm42600_driver);
--
2.25.1
