Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
[PATCH 28/32] i2c: bcm2835: Set up the rising/falling edge delays.,
Gerd Hoffmann
[PATCH 24/32] i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock,
Gerd Hoffmann
[PATCH 1/2] mfd: sm-usb-dig: Add support for the TI SM-USB-DIG,
Andrew F. Davis
[PATCH] i2c: pca-isa: Utilize the module_isa_driver macro,
William Breathitt Gray
[PATCH] i2c: elektor: Utilize the module_isa_driver macro,
William Breathitt Gray
[PATCH v7 0/4] i2c-smbus: add support for HOST NOTIFY,
Benjamin Tissoires
i2c tools, Quentin Duhamel
[PATCH v2 00/10] i2c-i801: Various cleanups,
minyard
- [PATCH v2 03/10] i2c-i801: Move hwpec handling into block transaction, minyard
- [PATCH v2 02/10] i2c-i801: Move hostcfg set/reset to i801_access(), minyard
- [PATCH v2 04/10] i2c-i801: Consolidate calls to i801_check_pre(), minyard
- [PATCH v2 07/10] i2c-i801: Fix some inconsistent variable names, minyard
- [PATCH v2 10/10] i2c-i801: Only write the host control reg when necessary, minyard
- [PATCH v2 09/10] i2c-i801: Null isr data buffer when done with it, minyard
- [PATCH v2 08/10] i2c-i801: Handle a protocol error in byte-by-byte isr, minyard
- [PATCH v2 05/10] i2c-i801: Consolidate calls to i801_check_post, minyard
- [PATCH v2 06/10] i2c-i801: Pass around a boolean read/write variable, minyard
- [PATCH v2 01/10] i2c-i801: Remove hwpec from block byte-by-byte function, minyard
[PATCH 00/14] eeprom: at24: driver rework and at24cs/at24mac support,
Bartosz Golaszewski
- [PATCH 14/14] eeprom: at24: add at24mac chips to the list of supported devices, Bartosz Golaszewski
- [PATCH 13/14] eeprom: at24: add support for at24mac series, Bartosz Golaszewski
- [PATCH 12/14] eeprom: at24: platform_data: add at24mac series flag, Bartosz Golaszewski
- [PATCH 11/14] eeprom: at24: add the at24cs series to the list of supported devices, Bartosz Golaszewski
- [PATCH 06/14] eeprom: at24: split at24_eeprom_read() into specialized functions, Bartosz Golaszewski
- [PATCH 10/14] eeprom: at24: support reading the serial number, Bartosz Golaszewski
- [PATCH 05/14] eeprom: at24: hide the read/write loop behind a macro, Bartosz Golaszewski
- [PATCH 09/14] eeprom: at24: platform_data: add serial number flag, Bartosz Golaszewski
- [PATCH 03/14] eeprom: at24: coding style fixes, Bartosz Golaszewski
- [PATCH 08/14] eeprom: at24: platform_data: use BIT() macro, Bartosz Golaszewski
- [PATCH 01/14] eeprom: at24: improve the device_id table readability, Bartosz Golaszewski
- [PATCH 07/14] eeprom: at24: split at24_eeprom_write() into specialized functions, Bartosz Golaszewski
- [PATCH 02/14] eeprom: at24: move at24_read() below at24_eeprom_write(), Bartosz Golaszewski
- [PATCH 04/14] eeprom: at24: call read/write functions via function pointers, Bartosz Golaszewski
- Re: [PATCH 00/14] eeprom: at24: driver rework and at24cs/at24mac support, Bartosz Golaszewski
[PATCH 1/1] iio: light: Added CM36672 Proximity Sensor Driver.,
Kevin Tsai
[PATCH] Revert "i2c: dev: switch from register_chrdev to cdev API",
Wolfram Sang
[i2c: dev] d6760b14d4: BUG: KASAN: slab-out-of-bounds in of_device_uevent at addr ffff8800091b4c49,
kernel test robot
[patch] i2c: dev: use after free in detach,
Dan Carpenter
[PATCH v8 1/3] i2c: tegra: use readx_poll_timeout after config_load reg programmed,
Shardar Shariff Md
[PATCH] i2c: dev: don't start function name with 'return',
Wolfram Sang
[PATCH 1/2][v3] i2c: qup: add ACPI support,
Austin Christ
[PATCH 0/5] i2c: designware: Enable fast mode plus and high speed,
Weifeng Voon
[RFC 0/1] i2c: omap: Add support for switching to slave mode,
Ravikumar Kattekola
[PATCH V3 0/2] i2c: qup: Some misc fixes,
Sricharan R
[PATCH] i2c: i801: Drop needless bit-wise OR,
Jean Delvare
i2c: xlp9xx: add ACPI support for Broadcom Vulcan,
Tanmay Jagdale
[PATCH] misc: at24: Fix typo in at24 header file,
Moritz Fischer
[PATCH] i2c: nomadik: move runtime suspend of hw to _noirq,
Linus Walleij
[RFC PATCH] i2c: i801: Fix I2C Block Read on 8-Series/C220 and later,
Jean Delvare
[PATCH v5] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR,
Mika Westerberg
[PATCH] i2c: I2C_RCAR should depend on HAS_DMA,
Geert Uytterhoeven
[PATCH 0018/1529] Fix typo,
Andrea Gelmini
[PATCH v3] i2c: at91: change log when dma configuration fails,
Ludovic Desroches
[PATCH v3 1/2] i2c: qup: add ACPI support,
Austin Christ
[PULL REQUEST] i2c for 4.7,
Wolfram Sang
[PATCH] i2c: rcar: use dma_request_chan(),
Niklas Söderlund
[PATCH v2 0/7] iio: inv_mpu6050: Support i2c master and external readings,
Crestez Dan Leonard
[PATCH] arm64: dts: rockchip: add i2c nodes for rk3399,
Douglas Anderson
[PATCH v2 0/5] of: dynamic: Changesets helpers & fixes,
Pantelis Antoniou
[PATCH v10 0/8] add i2c driver supported for rk3399,
David Wu
- [PATCH v10 1/8] i2c: rk3x: add documentation to fields in "struct rk3x_i2c", David Wu
- [PATCH v10 4/8] i2c: rk3x: Change SoC data to not use array, David Wu
- [PATCH v10 2/8] i2c: rk3x: use struct "rk3x_i2c_calced_timings", David Wu
- [PATCH v10 3/8] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd(), David Wu
- [PATCH v10 5/8] i2c: rk3x: Move spec timing data to "static const" structs, David Wu
- [PATCH v10 6/8] dt-bindings: i2c: rk3x: add support for rk3399, David Wu
- [PATCH v10 7/8] i2c: rk3x: add i2c support for rk3399 soc, David Wu
- [PATCH v10 8/8] i2c: rk3x: support fast-mode plus for rk3399, David Wu
- Re: [PATCH v10 0/8] add i2c driver supported for rk3399, Doug Anderson
- Re: [PATCH v10 0/8] add i2c driver supported for rk3399, Heiko Stübner
- Re: [PATCH v10 0/8] add i2c driver supported for rk3399, Wolfram Sang
[PATCHv2] i2c: rcar: add DMA support,
Niklas Söderlund
[PATCH i2c-tools] i2cget: Add support for i2c block data,
Crestez Dan Leonard
[PATCH v4] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR,
Mika Westerberg
[PATCH v2] i2c: at91: change log when dma configuration fails, Ludovic Desroches
[PATCH] i2c: at91: change log when dma configuration fails,
Ludovic Desroches
[PATCH v9 0/8] i2c-octeon and i2c-thunderx driver,
Jan Glauber
[PATCH] i2c: only check scl functions when using generic recovery,
Wolfram Sang
[PATCH v9 0/8] add i2c driver supported for rk3399,
David Wu
[PATCH v2 1/2] i2c: qup: add ACPI support,
Naveen Kaje
[PATCH] i2c: st: Implement bus clear,
Peter Griffin
[PATCH v2] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO,
Marc Gonzalez
[PATCH 0/5] Add support for the STM32F4 I2C,
M'boumba Cedric Madianga
[PATCH] i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO,
Mason
i2c-i801 partially broken on Lynx Point PCH?,
Jean Delvare
[PATCH v8 0/8] add i2c driver supported for rk3399,
David Wu
[PATCH v2 0/3] Add parameters for sysfs added I2C devices,
minyard
[PATCH 0/2] i2c: qup: Fixed the DMA transfer errors,
Abhishek Sahu
[PATCH v3] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR,
Mika Westerberg
[PATCH V2 0/2] drivers: i2c: qup: Some misc fixes,
Sricharan R
[PATCH] i2c: qup: use address helper function in read transfer,
Naveen Kaje
[v10, 0/7] Fix eSDHC host version register bug,
Yangbo Lu
- [v10, 6/7] MAINTAINERS: add entry for Freescale SoC drivers, Yangbo Lu
- [v10, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0, Yangbo Lu
- [v10, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl, Yangbo Lu
- [v10, 4/7] dt: move guts devicetree doc out of powerpc directory, Yangbo Lu
- [v10, 3/7] soc: fsl: add GUTS driver for QorIQ platforms, Yangbo Lu
- [v10, 2/7] ARM64: dts: ls2080a: add device configuration node, Yangbo Lu
- [v10, 1/7] Documentation: DT: update Freescale DCFG compatible, Yangbo Lu
[PATCH v9 0/9] i2c mux cleanup and locking update,
Peter Rosin
- [PATCH v9 8/9] [media] rtl2832_sdr: get rid of empty regmap wrappers, Peter Rosin
- [PATCH v9 9/9] [media] rtl2832: regmap is aware of lockdep, drop local locking hack, Peter Rosin
- [PATCH v9 7/9] [media] rtl2832: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 6/9] [media] si2168: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 4/9] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes, Peter Rosin
- [PATCH v9 5/9] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 2/9] i2c: muxes always lock the parent adapter, Peter Rosin
- [PATCH v9 3/9] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing, Peter Rosin
- [PATCH v9 1/9] i2c: allow adapter drivers to override the adapter locking, Peter Rosin
- Re: [PATCH v9 0/9] i2c mux cleanup and locking update, Wolfram Sang
[PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing,
Kieran Bingham
- [PATCHv5 8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure, Kieran Bingham
- [PATCHv5 5/8] i2c: Export i2c_match_id() for direct use by device drivers, Kieran Bingham
- [PATCHv5 7/8] mfd: 88pm860x: Move over to new I2C device .probe() call, Kieran Bingham
- [PATCHv5 6/8] i2c: Provide a temporary .probe_new() call-back type, Kieran Bingham
- [PATCHv5 3/8] i2c: Match using traditional OF methods, then by vendor-less compatible strings, Kieran Bingham
- [PATCHv5 4/8] i2c: Make I2C ID tables non-mandatory for DT'ed devices, Kieran Bingham
- [PATCHv5 1/8] i2c: Add pointer dereference protection to i2c_match_id(), Kieran Bingham
- [PATCHv5 2/8] i2c: Add the ability to match device to compatible string without an of_node, Kieran Bingham
- Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing, Lee Jones
- Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing, Javier Martinez Canillas
- Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing, Lee Jones
- Re: [PATCHv5 0/8] 2c: Relax mandatory I2C ID table passing, Wolfram Sang
[PATCH v7 0/9] add i2c driver supported for rk3399,
David Wu
[PATCH] i2c: rcar: add DMA support,
Niklas Söderlund
[PATCH v2] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR,
Mika Westerberg
[v9, 0/7] Fix eSDHC host version register bug,
Yangbo Lu
- [v9, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0, Yangbo Lu
- [v9, 4/7] dt: move guts devicetree doc out of powerpc directory, Yangbo Lu
- [v9, 3/7] soc: fsl: add GUTS driver for QorIQ platforms, Yangbo Lu
- [v9, 1/7] Documentation: DT: update Freescale DCFG compatible, Yangbo Lu
- [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver, Yangbo Lu
- [v9, 2/7] ARM64: dts: ls2080a: add device configuration node, Yangbo Lu
- [v9, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl, Yangbo Lu
[PATCH 1/2] i2c: qup: add ACPI support,
Naveen Kaje
[PATCH 1/1] i2c-dev: switch from register_chrdev to cdev API,
Erico Nunes
[PATCH v8 0/8] i2c-octeon and i2c-thunderx driver,
Jan Glauber
- [PATCH v8 1/8] i2c: octeon: Rename driver to prepare for split, Jan Glauber
- [PATCH v8 2/8] i2c: octeon: Split the driver into two parts, Jan Glauber
- [PATCH v8 3/8] i2c: thunderx: Add i2c driver for ThunderX SOC, Jan Glauber
- [PATCH v8 8/8] i2c: octeon: thunderx: Add MAINTAINERS entry, Jan Glauber
- [PATCH v8 7/8] i2c: cavium: Use booleon values for booleon variables, Jan Glauber
- [PATCH v8 6/8] i2c: octeon: Sort include files alphabetically, Jan Glauber
- [PATCH v8 5/8] i2c: octeon,thunderx: Move register offsets to struct, Jan Glauber
- [PATCH v8 4/8] i2c: thunderx: Add smbus alert support, Jan Glauber
- Re: [PATCH v8 0/8] i2c-octeon and i2c-thunderx driver, Jan Glauber
[PATCH 0/2] drivers: i2c: qup: Some misc fixes,
Sricharan R
Re: [RFC 5/7] iio: inv_mpu6050: Add support for auxiliary I2C master,
Jonathan Cameron
Re: [RFC 7/7] iio: inv_mpu6050: Add support for external sensors, Jonathan Cameron
[PATCH v3 0/2] i2c_imc: New driver, at long last,
Andy Lutomirski
I2C driver for LTC1760 dual smart battery system manager,
Karl-Heinz Schneider
[PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR,
Mika Westerberg
Re: [PATCH] i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR, Rafael J. Wysocki
[PATCH] i2c-algo-bit: declare i2c_bit_quirk_no_clk_stretch as static,
Michele Curti
[PATCH] i2c-mux-pca9541: fix setup_timer.cocci warnings,
Julia Lawall
[PATCH] i2c: Raise SDA for each received bit, if necessary,
Thomas Zimmermann
[PATCH] i2c: nforce2: Use IS_ENABLED() instead of checking for built-in or module,
Javier Martinez Canillas
[PATCH] i2c: imx: use usleep_range(50,100) instead of udelay(50),
Dirk Behme
[PATCH v7 00/15] i2c-octeon and i2c-thunderx drivers,
Jan Glauber
- [PATCH v7 12/15] i2c: octeon: Split the driver into two parts, Jan Glauber
- [PATCH v7 11/15] i2c: octeon: Rename driver to prepare for split, Jan Glauber
- [PATCH v7 13/15] i2c: thunderx: Add i2c driver for ThunderX SOC, Jan Glauber
- [PATCH v7 14/15] i2c: octeon,thunderx: Move register offsets to struct, Jan Glauber
- [PATCH v7 15/15] i2c: thunderx: Add smbus alert support, Jan Glauber
- [PATCH v7 06/15] dt-bindings: i2c: Add Octeon cn78xx TWSI, Jan Glauber
- [PATCH v7 10/15] i2c: octeon: Move read function before write, Jan Glauber
- [PATCH v7 08/15] i2c: octeon: Improve performance if interrupt is early, Jan Glauber
- [PATCH v7 07/15] i2c: octeon: Add support for cn78xx chips, Jan Glauber
- [PATCH v7 09/15] i2c: octeon: Add workaround for broken irqs on CN3860, Jan Glauber
- [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller, Jan Glauber
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
