Re: [PATCH v1 1/1] i2c-i801: make it depend on CONFIG_X86

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2016-06-16 at 11:49 +0200, Jean Delvare wrote:
> Hi Andy,
> 
> On Wed, 15 Jun 2016 16:22:03 +0300, Andy Shevchenko wrote:
> > The IP seems not used outside of x86 world, so, make it depend on
> > CONFIG_X86.
> 
> I've seen the ICH10 used on at least one IA64 system (Supermicro I8QBH
> mainboard.) So, nack, sorry. However I'd be OK with:
> 
> 	depends on X86 || IA64 || COMPILE_TEST

I don't like this. Anyway it's good to know that module is used
somewhere else. Thanks.

> 
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/i2c/busses/Kconfig    | 4 ++--
> >  drivers/i2c/busses/i2c-i801.c | 4 ++--
> >  2 files changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index f167021..78609ad 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -89,8 +89,8 @@ config I2C_HIX5HD2
> >  
> >  config I2C_I801
> >  	tristate "Intel 82801 (ICH/PCH)"
> > -	depends on PCI
> > -	select CHECK_SIGNATURE if X86 && DMI
> > +	depends on X86 && PCI
> > +	select CHECK_SIGNATURE if DMI
> >  	help
> >  	  If you say yes to this option, support will be included
> > for the Intel 801 family of mainboard I2C interfaces.  Specifically,
> > the following diff --git a/drivers/i2c/busses/i2c-i801.c
> > b/drivers/i2c/busses/i2c-i801.c index b436963..9dcc417 100644
> > --- a/drivers/i2c/busses/i2c-i801.c
> > +++ b/drivers/i2c/busses/i2c-i801.c
> > @@ -902,7 +902,7 @@ static const struct pci_device_id i801_ids[] = {
> >  
> >  MODULE_DEVICE_TABLE(pci, i801_ids);
> >  
> > -#if defined CONFIG_X86 && defined CONFIG_DMI
> > +#ifdef CONFIG_DMI
> >  static unsigned char apanel_addr;
> >  
> >  /* Scan the system ROM for the signature "FJKEYINF" */
> > @@ -1020,7 +1020,7 @@ static void i801_probe_optional_slaves(struct
> > i801_priv *priv) #else
> >  static void __init input_apanel_init(void) {}
> >  static void i801_probe_optional_slaves(struct i801_priv *priv) {}
> > -#endif	/* CONFIG_X86 && CONFIG_DMI */
> > +#endif	/* CONFIG_DMI */
> >  
> >  #if (defined CONFIG_I2C_MUX_GPIO || defined
> > CONFIG_I2C_MUX_GPIO_MODULE) && \ defined CONFIG_DMI
> 
> 

-- 

Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux