Linux Kernel I²C Bus Layer

• Date Index

• [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices, Andrew Jeffery
  • Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices, Guenter Roeck
    • Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices, Andrew Jeffery
    • Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices, Andrew Jeffery
  • [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Andrew Jeffery
    • Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Guenter Roeck
      • Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Andrew Jeffery
      • Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Andrew Jeffery
        • Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Guenter Roeck
          • Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour, Andrew Jeffery
  • [RFC PATCH 1/2] i2c: smbus: Allow throttling of transfers to client devices, Andrew Jeffery
• [PATCH AUTOSEL 5.8 25/29] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH AUTOSEL 5.4 19/22] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH AUTOSEL 4.14 12/15] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH AUTOSEL 4.9 09/10] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH AUTOSEL 4.4 7/8] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH AUTOSEL 4.19 16/19] i2c: algo: pca: Reapply i2c bus settings after reset, Sasha Levin
• [PATCH 0/2] Avoid meaningless DMA error print & use dev_err_probe, Alain Volmat
  • [PATCH v2 2/2] i2c: stm32: Simplify with dev_err_probe(), Alain Volmat
  • [PATCH 1/2] i2c: stm32: fix error message on upon dma_request_chan & defer handling, Alain Volmat
• [PATCH v2 0/1] i2c: add slave testunit driver, Wolfram Sang
  • [PATCH v2 1/1] i2c: add slave testunit driver, Wolfram Sang
    • Re: [PATCH v2 1/1] i2c: add slave testunit driver, Wolfram Sang
    • Re: [PATCH v2 1/1] i2c: add slave testunit driver, Alain Volmat
    • Re: [PATCH v2 1/1] i2c: add slave testunit driver, Wolfram Sang
• [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies, qii.wang
  • Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies, Yingjoe Chen
  • Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies, Andy Shevchenko
    • Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies, Qii Wang
    • Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies, Wolfram Sang
• [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK, Matthias Schiffer
  • Re: [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK, Fabio Estevam
  • Re: [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK, Wolfram Sang
• [PATCH 0/1] i2c: add slave testunit driver, Wolfram Sang
  • [PATCH 1/1] i2c: add slave testunit driver, Wolfram Sang
    • Re: [PATCH 1/1] i2c: add slave testunit driver, Alain Volmat
      • Re: [PATCH 1/1] i2c: add slave testunit driver, Wolfram Sang
• [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Randy Dunlap
    • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
    • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Dan Carpenter
    • Message not available
      • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Dan Carpenter
        • Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver, Andy Shevchenko
• [PATCH v3 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties, Krzysztof Kozlowski
  • [PATCH v3 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties, Krzysztof Kozlowski
    • Re: [PATCH v3 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties, Rob Herring
  • [PATCH v3 4/4] dt-bindings: i2c: imx: Fix i.MX 7 compatible matching, Krzysztof Kozlowski
  • [PATCH v3 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching, Krzysztof Kozlowski
  • Re: [PATCH v3 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties, Rob Herring
• [PATCH 0/5] Add support for custom names for AT24 EEPROMs, Jon Hunter
  • [PATCH 2/5] dt-bindings: eeprom: at24: Add label property for AT24, Jon Hunter
    • Re: [PATCH 2/5] dt-bindings: eeprom: at24: Add label property for AT24, Rob Herring
  • [PATCH 5/5] arm64: tegra: Populate EEPROMs for Jetson Xavier NX, Jon Hunter
  • [PATCH 4/5] arm64: tegra: Add label properties for EEPROMs, Jon Hunter
  • [PATCH 3/5] misc: eeprom: at24: Support custom device names for AT24 EEPROMs, Jon Hunter
  • [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field, Jon Hunter
    • Re: [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field, Bartosz Golaszewski
      • Re: [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field, Jon Hunter
        • Re: [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field, Jon Hunter
          • Re: [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field, Bartosz Golaszewski
• i2c-tools 4.2 is coming, Jean Delvare
• [PATCH] i2c: i801: Exclude device from suspend direct complete optimization, Jean Delvare
  • Re: [PATCH] i2c: i801: Exclude device from suspend direct complete optimization, Wolfram Sang
• [PATCH] i2c: stm32: do not display error when DMA is not requested, Alain Volmat
  • Re: [PATCH] i2c: stm32: do not display error when DMA is not requested, Wolfram Sang
    • Re: [PATCH] i2c: stm32: do not display error when DMA is not requested, Alain Volmat
      • Re: [PATCH] i2c: stm32: do not display error when DMA is not requested, Krzysztof Kozlowski
      • Re: [PATCH] i2c: stm32: do not display error when DMA is not requested, Wolfram Sang
• [PATCH] i2c: rcar: add HostNotify support, Wolfram Sang
  • Re: [PATCH] i2c: rcar: add HostNotify support, Wolfram Sang
• [PATCH v3 0/5] input: misc: Add IBM Operation Panel driver, Eddie James
  • [PATCH v3 1/5] dt-bindings: input: Add documentation for IBM Operation Panel, Eddie James
  • [PATCH v3 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device, Eddie James
    • Re: [PATCH v3 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device, Joel Stanley
  • [PATCH v3 2/5] input: misc: Add IBM Operation Panel driver, Eddie James
    • Re: [PATCH v3 2/5] input: misc: Add IBM Operation Panel driver, Wolfram Sang
    • Re: [PATCH v3 2/5] input: misc: Add IBM Operation Panel driver, Dmitry Torokhov
  • [PATCH v3 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device, Eddie James
    • Re: [PATCH v3 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device, Joel Stanley
  • [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Eddie James
    • Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Wolfram Sang
      • Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Wolfram Sang
    • Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Brendan Higgins
      • Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Eddie James
• [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Keith Busch
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jacob Keller
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Gustavo A. R. Silva
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jason Gunthorpe
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Mauro Carvalho Chehab
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Wolfram Sang
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Nicolas.Ferre
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Felipe Balbi
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Steffen Maier
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Ilya Dryomov
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Matthias Brugger
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Robin Murphy
    • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Joe Perches
  • Re: [Intel-gfx] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Jani Nikula
  • Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Miquel Raynal
  • Re: [oss-drivers] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;, Simon Horman
• [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices(), Hans de Goede
  • Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices(), Hans de Goede
    • Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices(), Mika Westerberg
  • Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices(), Wolfram Sang
• [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Barry Song
  • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Akash Asthana
  • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Mukesh, Savaliya
  • Message not available
    • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Wolfram Sang
      • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Akash Asthana
  • Message not available
    • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Wolfram Sang
  • Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ, Wolfram Sang
• [PATCH v7 00/34] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v7 03/34] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Dmitry Osipenko
    • Re: [PATCH v7 03/34] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Thierry Reding
    • Re: [PATCH v7 03/34] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Thierry Reding
  • [PATCH v7 04/34] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
    • Re: [PATCH v7 04/34] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear(), Thierry Reding
    • Re: [PATCH v7 04/34] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear(), Thierry Reding
  • [PATCH v7 02/34] i2c: tegra: Add missing pm_runtime_put(), Dmitry Osipenko
    • Re: [PATCH v7 02/34] i2c: tegra: Add missing pm_runtime_put(), Thierry Reding
    • Re: [PATCH v7 02/34] i2c: tegra: Add missing pm_runtime_put(), Thierry Reding
  • [PATCH v7 14/34] i2c: tegra: Clean up probe function, Dmitry Osipenko
    • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Thierry Reding
      • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Andy Shevchenko
        • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Thierry Reding
      • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Dmitry Osipenko
        • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Thierry Reding
    • Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function, Thierry Reding
  • [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
    • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
      • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Andy Shevchenko
        • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
          • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Andy Shevchenko
            • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
      • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
        • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
        • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
          • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
    • Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers, Thierry Reding
  • [PATCH v7 31/34] i2c: tegra: Clean up printk messages, Dmitry Osipenko
    • Re: [PATCH v7 31/34] i2c: tegra: Clean up printk messages, Thierry Reding
    • Re: [PATCH v7 31/34] i2c: tegra: Clean up printk messages, Thierry Reding
  • [PATCH v7 34/34] i2c: tegra: Improve driver module description, Dmitry Osipenko
    • Re: [PATCH v7 34/34] i2c: tegra: Improve driver module description, Thierry Reding
    • Re: [PATCH v7 34/34] i2c: tegra: Improve driver module description, Thierry Reding
  • [PATCH v7 15/34] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
    • Re: [PATCH v7 15/34] i2c: tegra: Reorder location of functions in the code, Thierry Reding
    • Re: [PATCH v7 15/34] i2c: tegra: Reorder location of functions in the code, Thierry Reding
  • [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
    • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Thierry Reding
      • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
        • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
          • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Thierry Reding
            • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Thierry Reding
    • Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments, Thierry Reding
  • [PATCH v7 33/34] i2c: tegra: Clean up whitespaces, newlines and indentation, Dmitry Osipenko
    • Re: [PATCH v7 33/34] i2c: tegra: Clean up whitespaces, newlines and indentation, Thierry Reding
    • Re: [PATCH v7 33/34] i2c: tegra: Clean up whitespaces, newlines and indentation, Thierry Reding
  • [PATCH v7 30/34] i2c: tegra: Clean up variable names, Dmitry Osipenko
    • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Thierry Reding
      • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Dmitry Osipenko
        • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Thierry Reding
          • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Dmitry Osipenko
            • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Thierry Reding
              • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Dmitry Osipenko
    • Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names, Thierry Reding
  • [PATCH v7 29/34] i2c: tegra: Improve formatting of variables, Dmitry Osipenko
    • Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables, Thierry Reding
      • Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables, Dmitry Osipenko
        • Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables, Thierry Reding
    • Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables, Thierry Reding
  • [PATCH v7 24/34] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v7 24/34] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Thierry Reding
    • Re: [PATCH v7 24/34] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Thierry Reding
  • [PATCH v7 26/34] i2c: tegra: Factor out hardware initialization into separate function, Dmitry Osipenko
    • Re: [PATCH v7 26/34] i2c: tegra: Factor out hardware initialization into separate function, Thierry Reding
    • Re: [PATCH v7 26/34] i2c: tegra: Factor out hardware initialization into separate function, Thierry Reding
  • [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
    • Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function, Thierry Reding
      • Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
        • Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function, Thierry Reding
    • Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function, Thierry Reding
  • [PATCH v7 22/34] i2c: tegra: Rename wait/poll functions, Dmitry Osipenko
    • Re: [PATCH v7 22/34] i2c: tegra: Rename wait/poll functions, Thierry Reding
    • Re: [PATCH v7 22/34] i2c: tegra: Rename wait/poll functions, Thierry Reding
  • [PATCH v7 23/34] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v7 23/34] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Thierry Reding
    • Re: [PATCH v7 23/34] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Thierry Reding
  • [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
    • Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Thierry Reding
      • Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Andy Shevchenko
        • Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Thierry Reding
          • Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
    • Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values, Thierry Reding
  • [PATCH v7 28/34] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v7 28/34] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Thierry Reding
    • Re: [PATCH v7 28/34] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Thierry Reding
  • [PATCH v7 13/34] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Dmitry Osipenko
    • Re: [PATCH v7 13/34] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Thierry Reding
    • Re: [PATCH v7 13/34] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Thierry Reding
  • [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Dmitry Osipenko
    • Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Thierry Reding
      • Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Dmitry Osipenko
        • Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Thierry Reding
    • Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Thierry Reding
  • [PATCH v7 18/34] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
    • Re: [PATCH v7 18/34] i2c: tegra: Remove likely/unlikely from the code, Thierry Reding
    • Re: [PATCH v7 18/34] i2c: tegra: Remove likely/unlikely from the code, Thierry Reding
  • [PATCH v7 19/34] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
    • Re: [PATCH v7 19/34] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear(), Thierry Reding
    • Re: [PATCH v7 19/34] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear(), Thierry Reding
  • [PATCH v7 20/34] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v7 20/34] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Thierry Reding
    • Re: [PATCH v7 20/34] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Thierry Reding
  • [PATCH v7 16/34] i2c: tegra: Clean up variable types, Dmitry Osipenko
    • Re: [PATCH v7 16/34] i2c: tegra: Clean up variable types, Thierry Reding
    • Re: [PATCH v7 16/34] i2c: tegra: Clean up variable types, Thierry Reding
  • [PATCH v7 17/34] i2c: tegra: Remove outdated barrier(), Dmitry Osipenko
    • Re: [PATCH v7 17/34] i2c: tegra: Remove outdated barrier(), Thierry Reding
    • Re: [PATCH v7 17/34] i2c: tegra: Remove outdated barrier(), Thierry Reding
  • [PATCH v7 05/34] i2c: tegra: Initialize div-clk rate unconditionally, Dmitry Osipenko
    • Re: [PATCH v7 05/34] i2c: tegra: Initialize div-clk rate unconditionally, Thierry Reding
    • Re: [PATCH v7 05/34] i2c: tegra: Initialize div-clk rate unconditionally, Thierry Reding
  • [PATCH v7 10/34] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Dmitry Osipenko
    • Re: [PATCH v7 10/34] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Thierry Reding
    • Re: [PATCH v7 10/34] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Thierry Reding
  • [PATCH v7 09/34] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
    • Re: [PATCH v7 09/34] i2c: tegra: Use reset_control_reset(), Thierry Reding
    • Re: [PATCH v7 09/34] i2c: tegra: Use reset_control_reset(), Thierry Reding
  • [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure, Dmitry Osipenko
    • Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure, Thierry Reding
      • Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure, Dmitry Osipenko
        • Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure, Thierry Reding
    • Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure, Thierry Reding
  • [PATCH v7 07/34] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
    • Re: [PATCH v7 07/34] i2c: tegra: Runtime PM always available on Tegra, Thierry Reding
    • Re: [PATCH v7 07/34] i2c: tegra: Runtime PM always available on Tegra, Thierry Reding
  • [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
    • Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Thierry Reding
      • Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
    • Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Thierry Reding
  • [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
    • Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Thierry Reding
      • Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
        • Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Thierry Reding
    • Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Thierry Reding
  • [PATCH v7 11/34] i2c: tegra: Use platform_get_irq(), Dmitry Osipenko
    • Re: [PATCH v7 11/34] i2c: tegra: Use platform_get_irq(), Thierry Reding
    • Re: [PATCH v7 11/34] i2c: tegra: Use platform_get_irq(), Thierry Reding
  • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Andy Shevchenko
    • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Dmitry Osipenko
      • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Wolfram Sang
        • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Dmitry Osipenko
        • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Thierry Reding
          • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Wolfram Sang
  • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Thierry Reding
    • Re: [PATCH v7 00/34] Improvements for Tegra I2C driver, Thierry Reding
• [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Evan Nimmo
  • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Wolfram Sang
    • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Chris Packham
      • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Wolfram Sang
        • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Chris Packham
          • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Wolfram Sang
            • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Chris Packham
          • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
            • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
              • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Stephen Rothwell
                • Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
• [GIT PULL] at24: fixes for v5.9-rc5, Bartosz Golaszewski
  • Re: [GIT PULL] at24: fixes for v5.9-rc5, Wolfram Sang
• [PATCH v2 0/5] input: misc: Add IBM Operation Panel driver, Eddie James
  • [PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device, Eddie James
    • Re: [PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device, Joel Stanley
  • [PATCH v2 2/5] input: misc: Add IBM Operation Panel driver, Eddie James
    • Re: [PATCH v2 2/5] input: misc: Add IBM Operation Panel driver, wsa
  • [PATCH v2 5/5] ARM: dts: Aspeed: Rainier: Add IBM Operation Panel I2C device, Eddie James
  • [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Eddie James
    • Re: [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits, Tao Ren
    • Re: [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits, kernel test robot
    • Re: [PATCH v2 3/5] i2c: aspeed: Mask IRQ status to relevant bits, kernel test robot
  • [PATCH v2 1/5] dt-bindings: input: Add documentation for IBM Operation Panel, Eddie James
• [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Cristian Ciocaltea
  • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Manivannan Sadhasivam
    • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Cristian Ciocaltea
      • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Manivannan Sadhasivam
        • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Cristian Ciocaltea
          • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Wolfram Sang
            • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Cristian Ciocaltea
              • Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver, Cristian Ciocaltea
• KASAN: out-of-bounds Write in i801_isr, syzbot
• [PATCH v6 00/35] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v6 03/35] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Dmitry Osipenko
  • [PATCH v6 04/35] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v6 16/35] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
    • Re: [PATCH v6 16/35] i2c: tegra: Reorder location of functions in the code, Andy Shevchenko
      • Re: [PATCH v6 16/35] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
        • Re: [PATCH v6 16/35] i2c: tegra: Reorder location of functions in the code, Andy Shevchenko
  • [PATCH v6 22/35] i2c: tegra: Improve formatting of variables, Dmitry Osipenko
  • [PATCH v6 34/35] i2c: tegra: Clean up whitespaces, newlines and indentation, Dmitry Osipenko
  • [PATCH v6 31/35] i2c: tegra: Clean up variable names, Dmitry Osipenko
  • [PATCH v6 28/35] i2c: tegra: Factor out hardware initialization into separate function, Dmitry Osipenko
  • [PATCH v6 30/35] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v6 32/35] i2c: tegra: Clean up printk messages, Dmitry Osipenko
  • [PATCH v6 33/35] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
  • [PATCH v6 35/35] i2c: tegra: Improve driver module description, Dmitry Osipenko
  • [PATCH v6 26/35] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v6 29/35] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
  • [PATCH v6 27/35] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
    • Re: [PATCH v6 27/35] i2c: tegra: Factor out register polling into separate function, Andy Shevchenko
      • Re: [PATCH v6 27/35] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
  • [PATCH v6 24/35] i2c: tegra: Rename wait/poll functions, Dmitry Osipenko
    • Re: [PATCH v6 24/35] i2c: tegra: Rename wait/poll functions, Andy Shevchenko
      • Re: [PATCH v6 24/35] i2c: tegra: Rename wait/poll functions, Dmitry Osipenko
  • [PATCH v6 17/35] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v6 21/35] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Dmitry Osipenko
  • [PATCH v6 23/35] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load(), Dmitry Osipenko
  • [PATCH v6 25/35] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v6 25/35] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Andy Shevchenko
      • Re: [PATCH v6 25/35] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v6 15/35] i2c: tegra: Clean up variable types, Dmitry Osipenko
  • [PATCH v6 14/35] i2c: tegra: Clean up probe function, Dmitry Osipenko
    • Re: [PATCH v6 14/35] i2c: tegra: Clean up probe function, Andy Shevchenko
      • Re: [PATCH v6 14/35] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v6 20/35] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v6 18/35] i2c: tegra: Remove outdated barrier(), Dmitry Osipenko
  • [PATCH v6 13/35] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Dmitry Osipenko
  • [PATCH v6 19/35] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v6 02/35] i2c: tegra: Add missing runtime PM put, Dmitry Osipenko
  • [PATCH v6 01/35] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
  • [PATCH v6 11/35] i2c: tegra: Use platform_get_irq(), Dmitry Osipenko
  • [PATCH v6 09/35] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
  • [PATCH v6 12/35] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
  • [PATCH v6 10/35] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Dmitry Osipenko
  • [PATCH v6 07/35] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v6 05/35] i2c: tegra: Initialize div-clk rate unconditionally, Dmitry Osipenko
  • [PATCH v6 06/35] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
  • [PATCH v6 08/35] i2c: tegra: Remove error message used for devm_request_irq() failure, Dmitry Osipenko
• [PATCH V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c, Roja Rani Yarubandi
  • Re: [PATCH V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c, Stephen Boyd
    • Re: [PATCH V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c, rojay
• [PATCH v5 00/36] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v5 03/36] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v5 05/36] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
  • [PATCH v5 02/36] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Dmitry Osipenko
  • [PATCH v5 04/36] i2c: tegra: Initialization div-clk rate unconditionally, Dmitry Osipenko
  • [PATCH v5 21/36] i2c: tegra: Rename wait/poll functions, Dmitry Osipenko
  • [PATCH v5 22/36] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v5 28/36] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
  • [PATCH v5 36/36] i2c: tegra: Improve tegra_i2c_dev structure, Dmitry Osipenko
    • Re: [PATCH v5 36/36] i2c: tegra: Improve tegra_i2c_dev structure, Andy Shevchenko
  • [PATCH v5 35/36] i2c: tegra: Rename couple "ret" variables to "err", Dmitry Osipenko
    • Re: [PATCH v5 35/36] i2c: tegra: Rename couple "ret" variables to "err", Andy Shevchenko
  • [PATCH v5 33/36] i2c: tegra: Clean up variable types, Dmitry Osipenko
    • Re: [PATCH v5 33/36] i2c: tegra: Clean up variable types, Andy Shevchenko
  • [PATCH v5 34/36] i2c: tegra: Improve driver module description, Dmitry Osipenko
  • [PATCH v5 31/36] i2c: tegra: Clean up whitespaces, newlines and indentation, Dmitry Osipenko
  • [PATCH v5 32/36] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
    • Re: [PATCH v5 32/36] i2c: tegra: Clean up and improve comments, Andy Shevchenko
  • [PATCH v5 30/36] i2c: tegra: Clean up printk messages, Dmitry Osipenko
  • [PATCH v5 29/36] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v5 27/36] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
    • Re: [PATCH v5 27/36] i2c: tegra: Reorder location of functions in the code, Andy Shevchenko
      • Re: [PATCH v5 27/36] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
  • [PATCH v5 24/36] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v5 23/36] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v5 19/36] i2c: tegra: Improve formatting of function variables, Dmitry Osipenko
  • [PATCH v5 26/36] i2c: tegra: Factor out hardware initialization into separate function, Dmitry Osipenko
    • Re: [PATCH v5 26/36] i2c: tegra: Factor out hardware initialization into separate function, Andy Shevchenko
  • [PATCH v5 25/36] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
  • [PATCH v5 20/36] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load(), Dmitry Osipenko
  • [PATCH v5 18/36] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails, Dmitry Osipenko
  • [PATCH v5 17/36] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v5 13/36] i2c: tegra: Clean up probe function, Dmitry Osipenko
    • Re: [PATCH v5 13/36] i2c: tegra: Clean up probe function, Andy Shevchenko
      • Re: [PATCH v5 13/36] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v5 16/36] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v5 14/36] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v5 15/36] i2c: tegra: Remove outdated barrier(), Dmitry Osipenko
  • [PATCH v5 11/36] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
    • Re: [PATCH v5 11/36] i2c: tegra: Use clk-bulk helpers, Andy Shevchenko
      • Re: [PATCH v5 11/36] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
  • [PATCH v5 12/36] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Dmitry Osipenko
  • [PATCH v5 10/36] i2c: tegra: Use platform_get_irq(), Dmitry Osipenko
  • [PATCH v5 08/36] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
    • Re: [PATCH v5 08/36] i2c: tegra: Use reset_control_reset(), Andy Shevchenko
      • Re: [PATCH v5 08/36] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
  • [PATCH v5 07/36] i2c: tegra: Remove error message used for devm_request_irq() failure, Dmitry Osipenko
  • [PATCH v5 09/36] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Dmitry Osipenko
  • [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
    • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Andy Shevchenko
      • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
        • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Andy Shevchenko
          • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
            • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Andy Shevchenko
              • Re: [PATCH v5 06/36] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v5 01/36] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
    • Re: [PATCH v5 01/36] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Andy Shevchenko
      • Re: [PATCH v5 01/36] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
• [RFC] i2c: i2c-mt65xx and DMA on MT6577 (compatibility issue), Boris Lysov
• [PATCH v4 00/31] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v4 01/31] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
  • [PATCH v4 14/31] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v4 21/31] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v4 22/31] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v4 23/31] i2c: tegra: Factor out register polling into separate function, Dmitry Osipenko
  • [PATCH v4 28/31] i2c: tegra: Clean up whitespaces, newlines and indentation, Dmitry Osipenko
  • [PATCH v4 26/31] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v4 30/31] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
    • Re: [PATCH v4 30/31] i2c: tegra: Clean up and improve comments, Michał Mirosław
      • Re: [PATCH v4 30/31] i2c: tegra: Clean up and improve comments, Dmitry Osipenko
        • Re: [PATCH v4 30/31] i2c: tegra: Clean up and improve comments, Michał Mirosław
  • [PATCH v4 27/31] i2c: tegra: Clean up printk messages, Dmitry Osipenko
  • [PATCH v4 31/31] i2c: tegra: Rename couple "ret" variables to "err", Dmitry Osipenko
  • [PATCH v4 29/31] i2c: tegra: Improve driver module description, Dmitry Osipenko
  • [PATCH v4 25/31] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
  • [PATCH v4 24/31] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
  • [PATCH v4 12/31] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt(), Dmitry Osipenko
  • [PATCH v4 19/31] i2c: tegra: Rename wait/poll functions, Dmitry Osipenko
  • [PATCH v4 20/31] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v4 18/31] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load(), Dmitry Osipenko
  • [PATCH v4 17/31] i2c: tegra: Improve formatting of function variables, Dmitry Osipenko
  • [PATCH v4 13/31] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v4 15/31] i2c: tegra: Remove bogus barrier(), Dmitry Osipenko
    • Re: [PATCH v4 15/31] i2c: tegra: Remove bogus barrier(), Dmitry Osipenko
  • [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
    • Re: [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Michał Mirosław
      • Re: [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
        • Re: [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Michał Mirosław
          • Re: [PATCH v4 16/31] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v4 02/31] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos(), Dmitry Osipenko
  • [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
    • Re: [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers, Michał Mirosław
      • Re: [PATCH v4 10/31] i2c: tegra: Use clk-bulk helpers, Dmitry Osipenko
  • [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization, Dmitry Osipenko
    • Re: [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization, Michał Mirosław
      • Re: [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization, Dmitry Osipenko
        • Re: [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization, Michał Mirosław
          • Re: [PATCH v4 11/31] i2c: tegra: Factor out runtime PM and hardware initialization, Dmitry Osipenko
  • [PATCH v4 03/31] i2c: tegra: Initialization div-clk rate unconditionally, Dmitry Osipenko
  • [PATCH v4 05/31] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v4 08/31] i2c: tegra: Use devm_platform_get_and_ioremap_resource(), Dmitry Osipenko
  • [PATCH v4 09/31] i2c: tegra: Use platform_get_irq(), Dmitry Osipenko
  • [PATCH v4 07/31] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
  • [PATCH v4 04/31] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
  • [PATCH v4 06/31] i2c: tegra: Remove error message used for devm_request_irq() failure, Dmitry Osipenko
  • Re: [PATCH v4 00/31] Improvements for Tegra I2C driver, Michał Mirosław
    • Re: [PATCH v4 00/31] Improvements for Tegra I2C driver, Dmitry Osipenko
• [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example, Boris Lysov
  • Re: [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example, Qii Wang
    • Re: [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example, Boris Lysov
      • Re: [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example, Qii Wang
        • Re: [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example, Boris Lysov
• [PATCH] i2c: amd_mp2: handle num is 0 input for i2c_amd_xfer, trix
  • Re: [PATCH] i2c: amd_mp2: handle num is 0 input for i2c_amd_xfer, Elie Morisse
  • Re: [PATCH] i2c: amd_mp2: handle num is 0 input for i2c_amd_xfer, Wolfram Sang
  • Re: [PATCH] i2c: amd_mp2: handle num is 0 input for i2c_amd_xfer, Wolfram Sang
• [PATCH v2 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties, Krzysztof Kozlowski
  • [PATCH v2 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching, Krzysztof Kozlowski
  • [PATCH v2 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties, Krzysztof Kozlowski
  • [PATCH v2 4/4] dt-bindings: i2c: imx: Fix i.MX 7 compatible matching, Krzysztof Kozlowski
• [PATCH 1/3] dt-bindings: i2c: ingenic: Add compatible string for the JZ4770, Paul Cercueil
  • [PATCH 2/3] i2c: jz4780: Add compatible string for JZ4770 SoC, Paul Cercueil
    • Re: [PATCH 2/3] i2c: jz4780: Add compatible string for JZ4770 SoC, Wolfram Sang
  • [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Paul Cercueil
    • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Rob Herring
      • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Paul Cercueil
        • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Rob Herring
          • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Paul Cercueil
            • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Rob Herring
              • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Wolfram Sang
    • Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr(), Wolfram Sang
  • Re: [PATCH 1/3] dt-bindings: i2c: ingenic: Add compatible string for the JZ4770, Rob Herring
  • Re: [PATCH 1/3] dt-bindings: i2c: ingenic: Add compatible string for the JZ4770, Wolfram Sang
• [PATCH v2] libi2c: Add a manual page to document the API, Jean Delvare
  • Re: [PATCH v2] libi2c: Add a manual page to document the API, Wolfram Sang
• [PATCH] i2cset: Fix short writes with mask, Jean Delvare
  • Re: [PATCH] i2cset: Fix short writes with mask, Wolfram Sang
    • Re: [PATCH] i2cset: Fix short writes with mask, Jean Delvare
      • Re: [PATCH] i2cset: Fix short writes with mask, Wolfram Sang
        • Re: [PATCH] i2cset: Fix short writes with mask, Jean Delvare
• [PATCH v8 0/6] Support running driver's probe for a device powered off, Sakari Ailus
  • [PATCH v8 1/6] i2c: Allow an ACPI driver to manage the device's power state during probe, Sakari Ailus
  • [PATCH v8 5/6] media: i2c: imx319: Support probe while the device is off, Sakari Ailus
  • [PATCH v8 6/6] at24: Support probing while off, Sakari Ailus
    • Re: [PATCH v8 6/6] at24: Support probing while off, Bartosz Golaszewski
      • Re: [PATCH v8 6/6] at24: Support probing while off, Wolfram Sang
        • Re: [PATCH v8 6/6] at24: Support probing while off, Bartosz Golaszewski
          • Re: [PATCH v8 6/6] at24: Support probing while off, Sakari Ailus
          • Re: [PATCH v8 6/6] at24: Support probing while off, Sakari Ailus
    • Re: [PATCH v8 6/6] at24: Support probing while off, Tomasz Figa
      • Re: [PATCH v8 6/6] at24: Support probing while off, Tomasz Figa
  • [PATCH v8 2/6] Documentation: ACPI: Document i2c-allow-low-power-probe _DSD property, Sakari Ailus
  • [PATCH v8 4/6] ov5670: Support probe whilst the device is in a low power state, Sakari Ailus
  • [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state, Sakari Ailus
    • Message not available
      • Re: [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state, Sakari Ailus
  • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Luca Ceresoli
    • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Sakari Ailus
      • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Luca Ceresoli
        • Message not available
          • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Luca Ceresoli
            • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Sakari Ailus
              • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Luca Ceresoli
        • Message not available
          • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Tomasz Figa
            • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Wolfram Sang
              • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Tomasz Figa
                • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Rafael J. Wysocki
                  • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Tomasz Figa
                    • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Sakari Ailus
  • Re: [PATCH v8 0/6] Support running driver's probe for a device powered off, Tomasz Figa
  • [PATCH v9 3/7] Documentation: ACPI: Document _PRE object usage for enum power state, Sakari Ailus
  • [PATCH v9 5/7] ov5670: Support probe whilst the device is in a low power state, Sakari Ailus
  • [PATCH v9 7/7] at24: Support probing while off, Sakari Ailus
    • Message not available
      • Message not available
        • Re: [PATCH v9 7/7] at24: Support probing while off, Bartosz Golaszewski
  • [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off, Sakari Ailus
    • Re: [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off, Bingbu Cao
  • [PATCH v9 4/7] ACPI: Add a convenience function to tell a device is in low power state, Sakari Ailus
  • [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state, Sakari Ailus
    • Message not available
      • Re: [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state, Sakari Ailus
        • Re: [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state, Rafael J. Wysocki
          • Re: [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state, Sakari Ailus
            • Re: [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state, Rafael J. Wysocki
  • [PATCH v9 2/7] i2c: Allow an ACPI driver to manage the device's power state during probe, Sakari Ailus
• [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
    • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
      • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Loic Poulain
      • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
  • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Michael S. Tsirkin
    • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Andy Shevchenko
    • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
  • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
    • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jie Deng
      • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
        • Message not available
          • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
  • Re: [PATCH] i2c: virtio: add a virtio i2c frontend driver, Jason Wang
• [PATCH v3 00/22] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v3 01/22] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
    • Re: [PATCH v3 01/22] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Andy Shevchenko
      • Re: [PATCH v3 01/22] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
  • [PATCH v3 07/22] i2c: tegra: Use dev_err_probe(), Dmitry Osipenko
  • [PATCH v3 18/22] i2c: tegra: Reorder location of functions in the code, Dmitry Osipenko
  • [PATCH v3 20/22] i2c: tegra: Remove "dma" variable, Dmitry Osipenko
  • [PATCH v3 17/22] i2c: tegra: Improve driver module description, Dmitry Osipenko
  • [PATCH v3 19/22] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v3 22/22] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member, Dmitry Osipenko
  • [PATCH v3 21/22] i2c: tegra: Initialization div-clk rate unconditionally, Dmitry Osipenko
  • [PATCH v3 15/22] i2c: tegra: Clean up whitespaces and newlines, Dmitry Osipenko
  • [PATCH v3 16/22] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v3 14/22] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load(), Dmitry Osipenko
  • [PATCH v3 12/22] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v3 11/22] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v3 13/22] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
    • Re: [PATCH v3 13/22] i2c: tegra: Check errors for both positive and negative values, Andy Shevchenko
  • [PATCH v3 08/22] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v3 04/22] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error, Dmitry Osipenko
    • Re: [PATCH v3 04/22] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error, Andy Shevchenko
      • Re: [PATCH v3 04/22] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error, Dmitry Osipenko
  • [PATCH v3 09/22] i2c: tegra: Clean up probe function, Dmitry Osipenko
    • Re: [PATCH v3 09/22] i2c: tegra: Clean up probe function, Andy Shevchenko
      • Re: [PATCH v3 09/22] i2c: tegra: Clean up probe function, Dmitry Osipenko
        • Re: [PATCH v3 09/22] i2c: tegra: Clean up probe function, Andy Shevchenko
          • Re: [PATCH v3 09/22] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v3 10/22] i2c: tegra: Drop '_timeout' from wait/poll function names, Dmitry Osipenko
  • [PATCH v3 05/22] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
    • Re: [PATCH v3 05/22] i2c: tegra: Use reset_control_reset(), Andy Shevchenko
      • Re: [PATCH v3 05/22] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
  • [PATCH v3 06/22] i2c: tegra: Improve formatting of function variables, Dmitry Osipenko
  • [PATCH v3 03/22] i2c: tegra: Clean up messages in the code, Dmitry Osipenko
    • Re: [PATCH v3 03/22] i2c: tegra: Clean up messages in the code, Andy Shevchenko
      • Re: [PATCH v3 03/22] i2c: tegra: Clean up messages in the code, Dmitry Osipenko
  • [PATCH v3 02/22] i2c: tegra: Add missing newline before returns, Dmitry Osipenko
• [PATCH v3 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Evan Nimmo
  • Re: [PATCH v3 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Wolfram Sang
• [PATCH 1/9] i2c: stm32: Simplify with dev_err_probe(), Krzysztof Kozlowski
  • [PATCH 4/9] i2c: cadence: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 4/9] i2c: cadence: Simplify with dev_err_probe(), Michal Simek
    • Re: [PATCH 4/9] i2c: cadence: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 7/9] i2c: rk3x: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 7/9] i2c: rk3x: Simplify with dev_err_probe(), Heiko Stübner
    • Re: [PATCH 7/9] i2c: rk3x: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 8/9] i2c: mux: gpmux: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 8/9] i2c: mux: gpmux: Simplify with dev_err_probe(), Peter Rosin
    • Re: [PATCH 8/9] i2c: mux: gpmux: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 9/9] i2c: mux: reg: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 9/9] i2c: mux: reg: Simplify with dev_err_probe(), Peter Rosin
    • Re: [PATCH 9/9] i2c: mux: reg: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 5/9] i2c: davinci: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 5/9] i2c: davinci: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 6/9] i2c: imx: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 6/9] i2c: imx: Simplify with dev_err_probe(), Uwe Kleine-König
    • Re: [PATCH 6/9] i2c: imx: Simplify with dev_err_probe(), Oleksij Rempel
    • Re: [PATCH 6/9] i2c: imx: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 3/9] i2c: bcm2835: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 3/9] i2c: bcm2835: Simplify with dev_err_probe(), Florian Fainelli
    • Re: [PATCH 3/9] i2c: bcm2835: Simplify with dev_err_probe(), Wolfram Sang
  • [PATCH 2/9] i2c: xiic: Simplify with dev_err_probe(), Krzysztof Kozlowski
    • Re: [PATCH 2/9] i2c: xiic: Simplify with dev_err_probe(), Michal Simek
    • Re: [PATCH 2/9] i2c: xiic: Simplify with dev_err_probe(), Wolfram Sang
  • Re: [PATCH 1/9] i2c: stm32: Simplify with dev_err_probe(), Alain Volmat
• [PATCH v2 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Evan Nimmo
  • Re: [PATCH v2 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
    • Re: [PATCH v2 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
      • Re: [PATCH v2 1/1] i2c: algo-pca: Reapply i2c bus settings after reset, Chris Packham
• [PATCH v2 00/17] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v2 01/17] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
  • [PATCH v2 02/17] i2c: tegra: Add missing newline before returns, Dmitry Osipenko
  • [PATCH v2 08/17] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v2 12/17] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v2 11/17] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v2 16/17] i2c: tegra: Rename variable in tegra_i2c_issue_bus_clear(), Dmitry Osipenko
  • [PATCH v2 17/17] i2c: tegra: Improve driver module description, Dmitry Osipenko
  • [PATCH v2 15/17] i2c: tegra: Remove unnecessary whitespaces and newlines, Dmitry Osipenko
  • [PATCH v2 14/17] i2c: tegra: Improve coding style of tegra_i2c_wait_for_config_load(), Dmitry Osipenko
  • [PATCH v2 13/17] i2c: tegra: Check errors for both positive and negative values, Dmitry Osipenko
  • [PATCH v2 10/17] i2c: tegra: Drop '_timeout' from wait/poll function names, Dmitry Osipenko
  • [PATCH v2 06/17] i2c: tegra: Improve formatting of function variables, Dmitry Osipenko
  • [PATCH v2 07/17] i2c: tegra: Use dev_err_probe(), Dmitry Osipenko
  • [PATCH v2 09/17] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v2 03/17] i2c: tegra: Clean up messages in the code, Dmitry Osipenko
    • Message not available
      • Re: [PATCH v2 03/17] i2c: tegra: Clean up messages in the code, Dmitry Osipenko
  • [PATCH v2 05/17] i2c: tegra: Use reset_control_reset(), Dmitry Osipenko
  • [PATCH v2 04/17] i2c: tegra: Don't ignore tegra_i2c_flush_fifos() error, Dmitry Osipenko
• [PATCH v7 0/6] Support running driver's probe for a device powered off, Sakari Ailus
  • [PATCH v7 4/6] media: i2c: imx319: Support probe while the device is off, Sakari Ailus
  • [PATCH v7 1/6] i2c: Allow an ACPI driver to manage the device's power state during probe, Sakari Ailus
  • [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe _DSD property, Sakari Ailus
    • Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe _DSD property, Rafael J. Wysocki
      • Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe _DSD property, Sakari Ailus
        • Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe _DSD property, Rafael J. Wysocki
          • Re: [PATCH v7 6/6] Documentation: ACPI: Document allow-low-power-probe _DSD property, Sakari Ailus
  • [PATCH v7 5/6] at24: Support probing while off, Sakari Ailus
  • [PATCH v7 2/6] ACPI: Add a convenience function to tell a device is in low power state, Sakari Ailus
  • [PATCH v7 3/6] ov5670: Support probe whilst the device is in a low power state, Sakari Ailus
• [PATCH] watchdog: da9063: wake up parent ahead of reboot, Ulrich Hecht
  • Re: [PATCH] watchdog: da9063: wake up parent ahead of reboot, Guenter Roeck
    • Re: [PATCH] watchdog: da9063: wake up parent ahead of reboot, Ulrich Hecht
• [PATCH v2 1/2] i2c: i801: Fix resume bug, Jean Delvare
  • [PATCH v2 2/2] i2c: i801: Simplify the suspend callback, Jean Delvare
    • Re: [PATCH v2 2/2] i2c: i801: Simplify the suspend callback, Wolfram Sang
  • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Jean Delvare
  • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Volker Rümelin
    • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Wolfram Sang
      • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Jean Delvare
    • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Jean Delvare
  • Re: [PATCH v2 1/2] i2c: i801: Fix resume bug, Wolfram Sang
• [PATCH] i2c: algo-pca: Reapply i2c bus settings after reset, Evan Nimmo
  • Re: [PATCH] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
    • Re: [PATCH] i2c: algo-pca: Reapply i2c bus settings after reset, Wolfram Sang
      • Re: [PATCH] i2c: algo-pca: Reapply i2c bus settings after reset, Andy Shevchenko
  • Re: [PATCH] i2c: algo-pca: Reapply i2c bus settings after reset, Chris Packham
• [PATCH v1 00/12] Improvements for Tegra I2C driver, Dmitry Osipenko
  • [PATCH v1 01/12] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer, Dmitry Osipenko
  • [PATCH v1 08/12] i2c: tegra: Runtime PM always available on Tegra, Dmitry Osipenko
  • [PATCH v1 09/12] i2c: tegra: Clean up probe function, Dmitry Osipenko
    • Re: [PATCH v1 09/12] i2c: tegra: Clean up probe function, Michał Mirosław
      • Re: [PATCH v1 09/12] i2c: tegra: Clean up probe function, Dmitry Osipenko
        • Re: [PATCH v1 09/12] i2c: tegra: Clean up probe function, Dmitry Osipenko
  • [PATCH v1 12/12] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg(), Dmitry Osipenko
  • [PATCH v1 10/12] i2c: tegra: Drop '_timeout' from wait/poll function names, Dmitry Osipenko
  • [PATCH v1 11/12] i2c: tegra: Remove likely/unlikely from the code, Dmitry Osipenko
  • [PATCH v1 02/12] i2c: tegra: Add missing newline before returns, Dmitry Osipenko
  • [PATCH v1 07/12] i2c: tegra: Use dev_err_probe(), Dmitry Osipenko