Re: [PATCH v2 00/18] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi S500 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Cristi,

On Fri, Nov 20, 2020 at 01:55:54AM +0200, Cristian Ciocaltea wrote:
> Hi,
> 
> This patchset brings a series of improvements for the Actions Semi S500
> SoCs family, by adding support for Clock & Reset Management Units, DMA,
> MMC, I2C & SIRQ controllers.
> 
> Please note the patches consist mostly of DTS and bindings/compatibles
> changes, since all the work they depend on has been already merged,
> i.e. clock fixes/additions, pinctrl driver, sirq driver.
> 
> For the moment, I have only enabled the features I could test on
> RoseapplePi SBC.
> 

I was hoping to apply this series for v5.11 but we ran out of time. So expect
this series to be in v5.12.

Thanks,
Mani

> Thanks,
> Cristi
> 
> Changes in v2:
> - Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
> - Added support for the SIRQ controller
> - Added new entries in MAINTAINERS
> - Updated naming of some patches in v1
> 
> Cristian Ciocaltea (18):
>   arm: dts: owl-s500: Add Clock Management Unit
>   arm: dts: owl-s500: Set CMU clocks for UARTs
>   arm: dts: owl-s500: Add Reset controller
>   dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
>   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
>     controller
>   arm: dts: owl-s500: Add DMA controller
>   arm: dts: owl-s500: Add pinctrl & GPIO support
>   dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
>   arm: dts: owl-s500: Add MMC support
>   dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
>   MAINTAINERS: Update entry for Actions Semi Owl I2C binding
>   i2c: owl: Add compatible for the Actions Semi S500 I2C controller
>   arm: dts: owl-s500: Add I2C support
>   arm: dts: owl-s500: Add SIRQ controller
>   arm: dts: owl-s500-roseapplepi: Use UART clock from CMU
>   arm: dts: owl-s500-roseapplepi: Add uSD support
>   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
>   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
> 
>  .../devicetree/bindings/dma/owl-dma.yaml      |   5 +-
>  .../devicetree/bindings/i2c/i2c-owl.txt       |  29 ----
>  .../devicetree/bindings/i2c/i2c-owl.yaml      |  62 ++++++++
>  .../devicetree/bindings/mmc/owl-mmc.yaml      |   4 +-
>  MAINTAINERS                                   |   3 +-
>  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
>  arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
>  drivers/dma/owl-dma.c                         |   1 +
>  drivers/i2c/busses/i2c-owl.c                  |   1 +
>  9 files changed, 304 insertions(+), 38 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.txt
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.yaml
> 
> -- 
> 2.29.2
> 



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux