[PATCH v3] i2c: qcom: Fix IRQ error misassignement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During cci_isr() errors read from register fields belonging to
i2c master1 are currently assigned to the status field belonging to
i2c master0. This patch corrects this error, and always assigns
master1 errors to the status field of master1.

Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
Suggested-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qcom-cci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index f13735beca58..1c259b5188de 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -194,9 +194,9 @@ static irqreturn_t cci_isr(int irq, void *dev)
 	if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) {
 		if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR ||
 			val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR)
-			cci->master[0].status = -ENXIO;
+			cci->master[1].status = -ENXIO;
 		else
-			cci->master[0].status = -EIO;
+			cci->master[1].status = -EIO;
 
 		writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ);
 		ret = IRQ_HANDLED;
-- 
2.27.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux