Re: [PATCH V2 2/2] cpufreq: dt: Refactor initialization to handle probe deferral properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13-10-20, 11:47, Geert Uytterhoeven wrote:
> Thanks for your patch, which is now commit dc279ac6e5b4e06e ("cpufreq:
> dt: Refactor initialization to handle probe deferral properly") in
> pm/linux-next, and to which I bisected a regression.
> Reverting this commit fixes the issue.

Strange. I had a look again and I failed to understand why it would
happen this way.

> On r8a7791/koelsch, during resume from s2ram:
> 
>      PM: suspend entry (deep)
>      Filesystems sync: 0.000 seconds
>      Freezing user space processes ... (elapsed 0.003 seconds) done.
>      OOM killer disabled.
>      Freezing remaining freezable tasks ... (elapsed 0.009 seconds) done.
>      Disabling non-boot CPUs ...
>      Enabling non-boot CPUs ...
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +i2c-sh_mobile e60b0000.i2c: Transfer request timed out
>     +cpu cpu0: OPP table can't be empty
>      CPU1 is up
>      rcar-pcie fe000000.pcie: PCIe x1: link up
> 
> The cpufreq code tries to talk to the PMIC, while the I2C controller
> that hosts the PMIC is suspended, and thus any communication attempt
> times out.  __i2c_check_suspended() fails to notice that, as the
> i2c_shmobile_i2c driver doesn't have a suspend callback calling
> i2c_mark_adapter_suspended() yet.  After fixing that (will send a patch
> soon), the I2C core rightfully complains with:
> 
>     WARNING: CPU: 1 PID: 13 at drivers/i2c/i2c-core.h:54
> __i2c_transfer+0x4a4/0x4e4
>     i2c i2c-6: Transfer while suspended
>     CPU: 1 PID: 13 Comm: cpuhp/1 Not tainted
> 5.9.0-shmobile-09581-g05a3e5886c7615b1-dirty #718
>     Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
>     [<c010dcec>] (unwind_backtrace) from [<c0109b18>] (show_stack+0x10/0x14)
>     [<c0109b18>] (show_stack) from [<c075e928>] (dump_stack+0x8c/0xac)
>     [<c075e928>] (dump_stack) from [<c011c23c>] (__warn+0xd0/0xe8)
>     [<c011c23c>] (__warn) from [<c011c2c4>] (warn_slowpath_fmt+0x70/0x9c)
>     [<c011c2c4>] (warn_slowpath_fmt) from [<c0548be8>]
> (__i2c_transfer+0x4a4/0x4e4)
>     [<c0548be8>] (__i2c_transfer) from [<c0548cd8>] (i2c_transfer+0xb0/0xf8)
>     [<c0548cd8>] (i2c_transfer) from [<c046f884>] (regmap_i2c_read+0x54/0x88)
>     [<c046f884>] (regmap_i2c_read) from [<c046b69c>]
> (_regmap_raw_read+0x118/0x1f0)
>     [<c046b69c>] (_regmap_raw_read) from [<c046b7b8>]
> (_regmap_bus_read+0x44/0x68)
>     [<c046b7b8>] (_regmap_bus_read) from [<c04698a0>] (_regmap_read+0x84/0x110)
>     [<c04698a0>] (_regmap_read) from [<c046c10c>] (regmap_read+0x40/0x58)
>     [<c046c10c>] (regmap_read) from [<c03cf0a8>]
> (regulator_get_voltage_sel_regmap+0x28/0x74)
>     [<c03cf0a8>] (regulator_get_voltage_sel_regmap) from [<c03cb29c>]
> (regulator_get_voltage_rdev+0xa4/0x14c)
>     [<c03cb29c>] (regulator_get_voltage_rdev) from [<c03cc658>]
> (regulator_get_voltage+0x2c/0x60)
>     [<c03cc658>] (regulator_get_voltage) from [<c03cd994>]
> (regulator_is_supported_voltage+0x30/0xd8)
>     [<c03cd994>] (regulator_is_supported_voltage) from [<c05a32b4>]
> (_opp_add+0x164/0x1b8)
>     [<c05a32b4>] (_opp_add) from [<c05a3388>] (_opp_add_v1+0x80/0xb8)
>     [<c05a3388>] (_opp_add_v1) from [<c05a5220>]
> (dev_pm_opp_of_add_table+0x130/0x168)
>     [<c05a5220>] (dev_pm_opp_of_add_table) from [<c05a5330>]
> (dev_pm_opp_of_cpumask_add_table+0x60/0xac)
>     [<c05a5330>] (dev_pm_opp_of_cpumask_add_table) from [<c05ab88c>]
> (cpufreq_init+0x94/0x1c4)
>     [<c05ab88c>] (cpufreq_init) from [<c05a8190>] (cpufreq_online+0x148/0x7ac)
>     [<c05a8190>] (cpufreq_online) from [<c05a87fc>]
> (cpuhp_cpufreq_online+0x8/0x10)
>     [<c05a87fc>] (cpuhp_cpufreq_online) from [<c011d088>]
> (cpuhp_invoke_callback+0xf8/0x2e4)
>     [<c011d088>] (cpuhp_invoke_callback) from [<c011d418>]
> (cpuhp_thread_fun+0xac/0x244)
>     [<c011d418>] (cpuhp_thread_fun) from [<c013c090>]
> (smpboot_thread_fn+0x19c/0x1a8)
>     [<c013c090>] (smpboot_thread_fn) from [<c0138408>] (kthread+0x104/0x110)
>     [<c0138408>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)

So there is a dependency chain here. cpufreq->regulator->i2c,
specially with the patch you pointed out, we handle defer-probing in a
better way and so I would expect i2c driver to get in first and
cpufreq should get registered later only. And I would have expected
the same during suspend/resume.

Can you see why this happens ?

-- 
viresh



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux