[PATCH v6 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.

So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.

Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Acked-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # Requires trivial backporting, simple remove
                           # the 3rd argument from the calls to
                           # i2c_imx_bus_busy().
---
 drivers/i2c/busses/i2c-imx.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 69ce5eea9b5a..e98356f3db84 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -615,6 +615,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic)
 		/* Stop I2C transaction */
 		dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		if (!(temp & I2CR_MSTA))
+			i2c_imx->stopped = 1;
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		if (i2c_imx->dma)
 			temp &= ~I2CR_DMAEN;
@@ -778,9 +780,12 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
 		 */
 		dev_dbg(dev, "<%s> clear MSTA\n", __func__);
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+		if (!(temp & I2CR_MSTA))
+			i2c_imx->stopped = 1;
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-		i2c_imx_bus_busy(i2c_imx, 0, false);
+		if (!i2c_imx->stopped)
+			i2c_imx_bus_busy(i2c_imx, 0, false);
 	} else {
 		/*
 		 * For i2c master receiver repeat restart operation like:
@@ -905,9 +910,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs,
 				dev_dbg(&i2c_imx->adapter.dev,
 					"<%s> clear MSTA\n", __func__);
 				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				if (!(temp & I2CR_MSTA))
+					i2c_imx->stopped =  1;
 				temp &= ~(I2CR_MSTA | I2CR_MTX);
 				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
-				i2c_imx_bus_busy(i2c_imx, 0, atomic);
+				if (!i2c_imx->stopped)
+					i2c_imx_bus_busy(i2c_imx, 0, atomic);
 			} else {
 				/*
 				 * For i2c master receiver repeat restart operation like:
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux