On 18/05/16 16:00, Crestez Dan Leonard wrote:
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
Kind of a pity we have to do this, but fair enough!
Jonathan
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++
> drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 9 ++++++---
> drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 4 +++-
> 3 files changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index 297b0ef..bd2c0fd 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -80,6 +80,7 @@ enum inv_devices {
> * @enable: master enable state.
> * @accl_fifo_enable: enable accel data output
> * @gyro_fifo_enable: enable gyro data output
> + * @user_ctrl: The non-volatile bits of user_ctrl
> * @fifo_rate: FIFO update rate.
> */
> struct inv_mpu6050_chip_config {
> @@ -89,6 +90,7 @@ struct inv_mpu6050_chip_config {
> unsigned int enable:1;
> unsigned int accl_fifo_enable:1;
> unsigned int gyro_fifo_enable:1;
> + u8 user_ctrl;
> u16 fifo_rate;
> };
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index 3fc0b71..56ee1e2 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -53,13 +53,15 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> if (result)
> goto reset_fifo_fail;
> /* disable fifo reading */
> - result = regmap_write(st->map, st->reg->user_ctrl, 0);
> + st->chip_config.user_ctrl &= ~INV_MPU6050_BIT_FIFO_EN;
> + result = regmap_write(st->map, st->reg->user_ctrl,
> + st->chip_config.user_ctrl);
> if (result)
> goto reset_fifo_fail;
>
> /* reset FIFO*/
> result = regmap_write(st->map, st->reg->user_ctrl,
> - INV_MPU6050_BIT_FIFO_RST);
> + st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST);
> if (result)
> goto reset_fifo_fail;
>
> @@ -76,8 +78,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> return result;
> }
> /* enable FIFO reading and I2C master interface*/
> + st->chip_config.user_ctrl |= INV_MPU6050_BIT_FIFO_EN;
> result = regmap_write(st->map, st->reg->user_ctrl,
> - INV_MPU6050_BIT_FIFO_EN);
> + st->chip_config.user_ctrl);
> if (result)
> goto reset_fifo_fail;
> /* enable sensor output to FIFO */
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> index 1a6bad3..fc55923 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> @@ -74,7 +74,9 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
> if (result)
> return result;
>
> - result = regmap_write(st->map, st->reg->user_ctrl, 0);
> + st->chip_config.user_ctrl &= ~INV_MPU6050_BIT_FIFO_EN;
> + result = regmap_write(st->map, st->reg->user_ctrl,
> + st->chip_config.user_ctrl);
> if (result)
> return result;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
