Linux Kernel I2C

• Thread Index

• Re: [PATCH] i2c: aT91: remove legacy DMA left overs
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for v5.9
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: owl: Clear NACK and BUS error bits
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: at91: Use devm_platform_get_and_ioremap_resource()
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: add a virtio i2c frontend driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH 2/3] Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 1/3] soc: qcom: geni: More properly switch to DMA mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 3/3] soc: qcom: geni: Optimize select fifo/dma mode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 0/3] i2c: i2c-qcom-geni: More properly fix the DMA race
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-mux-gpio: Enable this driver in ACPI land
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] i2c: i2c-mux-gpio: Enable this driver in ACPI land
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Andreas Schwab <schwab@xxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v2 0/1] fix i2c polling mode workaround for FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH v6 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v6 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v6 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v6 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v6 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v5 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: "Mukesh, Savaliya" <msavaliy@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• [PATCH 3/3] soc: qcom: geni: Optimize select fifo/dma mode
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/3] Revert "i2c: i2c-qcom-geni: Fix DMA transfer race"
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/3] soc: qcom: geni: More properly switch to DMA mode
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/3] i2c: i2c-qcom-geni: More properly fix the DMA race
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• [PATCH 3/3] i2c: owl: Enable asynchronous probing
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• [PATCH 2/3] i2c: owl: Add support for atomic transfers
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• [PATCH 1/3] i2c: owl: Clear NACK and BUS error bits
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• [PATCH 0/3] Improve Actions Semi Owl I2C driver
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• Re: [PATCH 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Sagar Kadam <sagar.kadam@xxxxxxxxxxxx>
• Re: [PATCH V5 1/3] soc: qcom: geni: Remove "iova" check
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mv64xxx: Add bus error recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: meson: fixup rate calculation with filter delay
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: meson: keep peripheral clock enabled
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: meson: fix clock setting overwrite
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: Designeware I2C slave confusing IC_INTR_STOP_DET handle
  • From: <Michael.Wu@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxx>
• [PATCH 5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6
  • From: Caleb Connolly <caleb@xxxxxxxxxxxxx>
• Re: Designeware I2C slave confusing IC_INTR_STOP_DET handle
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• [PATCH v5 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v5 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v5 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v5 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v4 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/3] i2c: meson: keep peripheral clock enabled
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 3/3] i2c: meson: fixup rate calculation with filter delay
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 1/3] i2c: meson: fix clock setting overwrite
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 0/3] i2c: meson: scl rate fixups
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Designeware I2C slave confusing IC_INTR_STOP_DET handle
  • From: <Michael.Wu@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• [PATCH 0/1] fix i2c polling mode workaround for FU540-C000 SoC
  • From: Sagar Shrikant Kadam <sagar.kadam@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH v4 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v4 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v4 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v4 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• RE: [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v8 6/6] at24: Support probing while off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v8 6/6] at24: Support probing while off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v3 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v3 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v3 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v3 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Ulrich Hecht <uli@xxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v9 00/32] Improvements for Tegra I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• RE: [PATCH v11 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• Re: [PATCH v9 00/32] Improvements for Tegra I2C driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] Documentation: i2c: add testunit docs to index
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: testunit: improve documentation
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v9 00/32] Improvements for Tegra I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/4] dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: Add missing 'unevaluatedProperties'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/4] dt-bindings: Explicitly allow additional properties in common schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/4] dt-bindings: Explicitly allow additional properties in board/SoC schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/4] dt-bindings: additional/unevaluatedProperties clean-ups
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: pxa: move to generic GPIO recovery
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: pxa: move to generic GPIO recovery
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: pxa: move to generic GPIO recovery
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: pxa: move to generic GPIO recovery
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: pxa: move to generic GPIO recovery
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.9
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] i2c: pxa: move to generic GPIO recovery
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH] i2c: pxa: move to generic GPIO recovery
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 5.9
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V5 3/3] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH V5 1/3] soc: qcom: geni: Remove "iova" check
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v2 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH v2 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] Documentation: i2c: add testunit docs to index
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] docs: i2c: index.rst: add slave-testunit-backend.rst
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 0/6] Fix new html build warnings from next-20201001
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 4/6] docs: i2c: index.rst: add slave-testunit-backend.rst
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 4/6] docs: i2c: index.rst: add slave-testunit-backend.rst
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 0/6] Fix new html build warnings from next-20201001
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Alex Qiu <xqiu@xxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Avi Fishman <avifishman70@xxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Alex Qiu <xqiu@xxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Avi Fishman <avifishman70@xxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH V5 2/3] i2c: i2c-qcom-geni: Store DMA mapping data in geni_i2c_dev struct
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• [PATCH V5 3/3] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• [PATCH V5 0/3] Implement Shutdown callback for geni-i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• [PATCH V5 1/3] soc: qcom: geni: Remove "iova" check
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• [PATCH] i2c: aT91: remove legacy DMA left overs
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: mediatek: remove redundant null check
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• [PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• RE: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• RE: [PATCH v11 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v9 05/32] i2c: tegra: Initialize div-clk rate unconditionally
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 03/32] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 02/32] i2c: tegra: Add missing pm_runtime_put()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 04/32] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 17/32] i2c: tegra: Remove outdated barrier()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 06/32] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 16/32] i2c: tegra: Clean up variable types
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 18/32] i2c: tegra: Remove likely/unlikely from the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 14/32] i2c: tegra: Clean up probe function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 15/32] i2c: tegra: Reorder location of functions in the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 19/32] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 13/32] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 11/32] i2c: tegra: Use platform_get_irq()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 20/32] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 21/32] i2c: tegra: Rename wait/poll functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 29/32] i2c: tegra: Clean up printk messages
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 22/32] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 27/32] i2c: tegra: Improve formatting of variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 26/32] i2c: tegra: Check errors for both positive and negative values
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 31/32] i2c: tegra: Clean up whitespaces, newlines and indentation
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 32/32] i2c: tegra: Improve driver module description
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 25/32] i2c: tegra: Factor out hardware initialization into separate function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 30/32] i2c: tegra: Clean up and improve comments
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 28/32] i2c: tegra: Clean up variable names
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 23/32] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 24/32] i2c: tegra: Factor out register polling into separate function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 09/32] i2c: tegra: Use reset_control_reset()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 10/32] i2c: tegra: Use devm_platform_get_and_ioremap_resource()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 12/32] i2c: tegra: Use clk-bulk helpers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 08/32] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 07/32] i2c: tegra: Runtime PM always available on Tegra
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 01/32] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v9 00/32] Improvements for Tegra I2C driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v8 12/32] i2c: tegra: Use clk-bulk helpers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 23/32] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v8 12/32] i2c: tegra: Use clk-bulk helpers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: efm32: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Alder Lake PCH-S
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 12/32] i2c: tegra: Use clk-bulk helpers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH v4] i2c: sh_mobile: implement atomic transfers
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Alder Lake PCH-S
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH] i2c: testunit: improve documentation
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: npcm7xx: Clear LAST bit after a failed transaction.
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: imx: Fix external abort on interrupt in exit paths
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: i2c: imx: Fix i.MX 7 compatible matching
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 7/9] i2c: rk3x: Simplify with dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] at24: updates for v5.10
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Fix i2c_ram structure
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [GIT PULL] at24: updates for v5.10
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: imx: Fix external abort on interrupt in exit paths
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] i2c: i801: Add support for Intel Alder Lake PCH-S
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 3/5] misc: eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V2 2/5] dt-bindings: eeprom: at24: Add label property for AT24
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V2 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V2 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v4 4/4] dt-bindings: i2c: imx: Fix i.MX 7 compatible matching
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] i2c: sh_mobile: implement atomic transfers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Fix i2c_ram structure
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 29/32] i2c: tegra: Clean up printk messages
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v8 00/32] Improvements for Tegra I2C driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Fix i2c_ram structure
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: sh_mobile: implement atomic transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2 2/5] dt-bindings: eeprom: at24: Add label property for AT24
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] i2c: sh_mobile: implement atomic transfers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cpm: Fix i2c_ram structure
  • From: Jochen Friedrich <jochen@xxxxxxxx>
• [PATCH v2] i2c: cpm: Fix i2c_ram structure
  • From: nico.vince@xxxxxxxxx
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Vincent Nicolas <Nicolas.Vincent@xxxxxxxxxxx>
• Re: [PATCH V2 0/5] Add support for custom names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V2 0/5] Add support for custom names for AT24 EEPROMs
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/5] Add support for custom names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH V2 0/5] Add support for custom names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Vincent Nicolas <Nicolas.Vincent@xxxxxxxxxxx>
• Re: [PATCH v8 00/32] Improvements for Tegra I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 00/32] Improvements for Tegra I2C driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v11 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v8 04/32] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• RE: [PATCH v10 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v8 09/32] i2c: tegra: Use reset_control_reset()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 05/32] i2c: tegra: Initialize div-clk rate unconditionally
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 07/32] i2c: tegra: Runtime PM always available on Tegra
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 10/32] i2c: tegra: Use devm_platform_get_and_ioremap_resource()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 11/32] i2c: tegra: Use platform_get_irq()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 08/32] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 06/32] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 14/32] i2c: tegra: Clean up probe function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 15/32] i2c: tegra: Reorder location of functions in the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 13/32] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 16/32] i2c: tegra: Clean up variable types
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 17/32] i2c: tegra: Remove outdated barrier()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 18/32] i2c: tegra: Remove likely/unlikely from the code
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 19/32] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 20/32] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 24/32] i2c: tegra: Factor out register polling into separate function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 25/32] i2c: tegra: Factor out hardware initialization into separate function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 21/32] i2c: tegra: Rename wait/poll functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 30/32] i2c: tegra: Clean up and improve comments
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 31/32] i2c: tegra: Clean up whitespaces, newlines and indentation
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 32/32] i2c: tegra: Improve driver module description
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 22/32] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 26/32] i2c: tegra: Check errors for both positive and negative values
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 29/32] i2c: tegra: Clean up printk messages
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 27/32] i2c: tegra: Improve formatting of variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 23/32] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 28/32] i2c: tegra: Clean up variable names
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 12/32] i2c: tegra: Use clk-bulk helpers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 02/32] i2c: tegra: Add missing pm_runtime_put()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 03/32] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 01/32] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v8 00/32] Improvements for Tegra I2C driver
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v11 0/2] i2c: add driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v11 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3] i2c: sh_mobile: implement atomic transfers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3] i2c: sh_mobile: implement atomic transfers
  • From: Ulrich Hecht <uli+renesas@xxxxxxxx>
• Re: [PATCH v5 00/16] Allwinner A100 Initial support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 7/9] i2c: rk3x: Simplify with dev_err_probe()
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: Upstream I2C driver that designed for rpmsg
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• i2c-tools 4.2 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: Upstream I2C driver that designed for rpmsg
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: cpm: Fix i2c_ram structure
  • From: nico.vince@xxxxxxxxx
• Re: [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• RE: [PATCH] i2c: nvidia-gpu: use dev_info for timeout error
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v10 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: nvidia-gpu: use dev_info for timeout error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: nvidia-gpu: use dev_info for timeout error
  • From: Ajay Gupta <ajaykuee@xxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v10 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v10 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH v10 0/2] i2c: add driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH AUTOSEL 5.8 08/20] i2c: aspeed: Mask IRQ status to relevant bits
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.8 17/20] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 14/15] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 07/15] i2c: aspeed: Mask IRQ status to relevant bits
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 8/9] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 2/3] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 2/3] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.8 19/20] i2c: mediatek: Send i2c master code at more than 1MHz
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ
  • From: Akash Asthana <akashast@xxxxxxxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH V4] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 00/34] Improvements for Tegra I2C driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 31/34] i2c: tegra: Clean up printk messages
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 26/34] i2c: tegra: Factor out hardware initialization into separate function
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 19/34] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 10/34] i2c: tegra: Use devm_platform_get_and_ioremap_resource()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 09/34] i2c: tegra: Use reset_control_reset()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 00/34] Improvements for Tegra I2C driver
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 03/34] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 33/34] i2c: tegra: Clean up whitespaces, newlines and indentation
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 34/34] i2c: tegra: Improve driver module description
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 28/34] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 24/34] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 23/34] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 22/34] i2c: tegra: Rename wait/poll functions
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 20/34] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 18/34] i2c: tegra: Remove likely/unlikely from the code
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 17/34] i2c: tegra: Remove outdated barrier()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 16/34] i2c: tegra: Clean up variable types
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 15/34] i2c: tegra: Reorder location of functions in the code
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 13/34] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 11/34] i2c: tegra: Use platform_get_irq()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 07/34] i2c: tegra: Runtime PM always available on Tegra
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 05/34] i2c: tegra: Initialize div-clk rate unconditionally
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 04/34] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 02/34] i2c: tegra: Add missing pm_runtime_put()
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
  • From: Thierry Reding <treding@xxxxxxxxxx>
• Re: [PATCH v1] i2c: nvidia-gpu: Use put_unaligned_be24()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: ismt: Add support for Intel Emmitsburg PCH
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: ismt: Add support for Intel Emmitsburg PCH
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: ismt: Add support for Intel Emmitsburg PCH
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: ismt: Describe parameters in kernel doc
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: jz4780: Add compatible string for JZ4770 SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: ingenic: Add compatible string for the JZ4770
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: amd_mp2: handle num is 0 input for i2c_amd_xfer
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: replace spin_lock_irqsave by spin_lock in hard IRQ
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Exclude device from suspend direct complete optimization
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Use kobj_to_dev() API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Switch to using the new API kobj_to_dev()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 00/34] Improvements for Tegra I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] misc: eeprom: use helper to get i2c_client from kobj
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: add HostNotify support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] misc: eeprom: use helper to get i2c_client from kobj
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v3] i2c: imx: Fix external abort on interrupt in exit paths
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1] i2c: npcm7xx: Clear LAST bit after a failed transaction.
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 5.9
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for 5.9
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 02/20] dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 05/20] dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 02/20] dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 05/20] dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 11/20] dt-bindings: usb: renesas,usbhs: Add r8a774e1 support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 07/20] dt-bindings: usb: renesas,usb3-peri: Document r8a774e1 support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 01/20] dt-bindings: pci: rcar-pci: Add device tree support for r8a774e1
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 03/20] dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• [PATCH] misc: eeprom: use helper to get i2c_client from kobj
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Switch to using the new API kobj_to_dev()
  • From: <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Switch to using the new API kobj_to_dev()
  • From: "tiantao (H)" <tiantao6@xxxxxxxxxx>
• Re: [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Switch to using the new API kobj_to_dev()
  • From: <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: stm32: name slave slot to ease maintenance
  • From: <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: stm32: fix slot id after introduction of host-notify support
  • From: <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: mediatek: Fix generic definitions for bus frequency
  • From: <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: mediatek: Send i2c master code at more than 1MHz
  • From: <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH -next] i2c: efm32: Use devm_platform_get_and_ioremap_resource()
  • From: "Wangshaobo (bobo)" <bobo.shaobowang@xxxxxxxxxx>
• Re: [PATCH -next] i2c: efm32: Use devm_platform_get_and_ioremap_resource()
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH -next] i2c: efm32: Use devm_platform_get_and_ioremap_resource()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH -next] i2c: efm32: Use devm_platform_get_and_ioremap_resource()
  • From: Wang ShaoBo <bobo.shaobowang@xxxxxxxxxx>
• [PATCH -next] i2c: at91: Use devm_platform_get_and_ioremap_resource()
  • From: Wang ShaoBo <bobo.shaobowang@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 095/330] i2c: tegra: Prevent interrupt triggering after transfer timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 258/330] i2c: tegra: Restore pinmux on system resume
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 3/4] i2c: designware: Allow SMBus block reads up to 255 bytes in length
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] i2c: designware: Allow SMBus block reads up to 255 bytes in length
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Jacob Keller <jacob.e.keller@xxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: designware: Ensure tx_buf_len is nonzero for SMBus block reads
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 4/4] dt-bindings: i2c: imx: Fix i.MX 7 compatible matching
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: designware: Ensure tx_buf_len is nonzero for SMBus block reads
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v7 31/34] i2c: tegra: Clean up printk messages
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH V4] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• Re: [PATCH v7 09/34] i2c: tegra: Use reset_control_reset()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 14/34] i2c: tegra: Clean up probe function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 2/3] i2c: imx: Check for I2SR_IAL after every byte
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 3/3] i2c: imx: Don't generate STOP condition if arbitration has been lost
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 1/3] i2c: imx: Fix reset of I2SR_IAL flag
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 2/4] i2c: designware: Ensure tx_buf_len is nonzero for SMBus block reads
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 0/3] i2c: imx: Fix handling of arbitration loss
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v7 00/34] Improvements for Tegra I2C driver
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 17/34] i2c: tegra: Remove outdated barrier()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 16/34] i2c: tegra: Clean up variable types
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 19/34] i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 18/34] i2c: tegra: Remove likely/unlikely from the code
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 15/34] i2c: tegra: Reorder location of functions in the code
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 34/34] i2c: tegra: Improve driver module description
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 33/34] i2c: tegra: Clean up whitespaces, newlines and indentation
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 32/34] i2c: tegra: Clean up and improve comments
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 30/34] i2c: tegra: Clean up variable names
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 29/34] i2c: tegra: Improve formatting of variables
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• Re: [PATCH v7 28/34] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 0/2] Fix some definitions for bus frequency
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v7 27/34] i2c: tegra: Check errors for both positive and negative values
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 26/34] i2c: tegra: Factor out hardware initialization into separate function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 2/2] i2c: mediatek: Send i2c master code at more than 1MHz
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 1/2] i2c: mediatek: Fix generic definitions for bus frequency
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v7 25/34] i2c: tegra: Factor out register polling into separate function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 07/34] i2c: tegra: Runtime PM always available on Tegra
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 24/34] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 23/34] i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 22/34] i2c: tegra: Rename wait/poll functions
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 21/34] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 20/34] i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 12/34] i2c: tegra: Use clk-bulk helpers
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 13/34] i2c: tegra: Move out all device-tree parsing into tegra_i2c_parse_dt()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 11/34] i2c: tegra: Use platform_get_irq()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 10/34] i2c: tegra: Use devm_platform_get_and_ioremap_resource()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 08/34] i2c: tegra: Remove error message used for devm_request_irq() failure
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 06/34] i2c: tegra: Remove i2c_dev.clk_divisor_non_hs_mode member
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 02/34] i2c: tegra: Add missing pm_runtime_put()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 04/34] i2c: tegra: Mask interrupt in tegra_i2c_issue_bus_clear()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 05/34] i2c: tegra: Initialize div-clk rate unconditionally
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 03/34] i2c: tegra: Handle potential error of tegra_i2c_flush_fifos()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v7 01/34] i2c: tegra: Make tegra_i2c_flush_fifos() usable in atomic transfer
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: Question on SMBUS slave transmit with PEC enabled
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [oss-drivers] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Simon Horman <simon.horman@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] eeprom: at24: set type id as EEPROM
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v2 2/4] i2c: designware: Ensure tx_buf_len is nonzero for SMBus block reads
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] HID: i2c-hid: Use block reads when possible to save power
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] i2c: designware: Allow SMBus block reads up to 255 bytes in length
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] i2c: designware: Fix transfer failures for invalid SMBus block reads
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• [PATCH v2 0/4] i2c-hid: Save power by reducing i2c xfers with block reads
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• [PATCH] i2c: Use kobj_to_dev() API
  • From: Wang Qing <wangqing@xxxxxxxx>
• Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH] misc: eeprom: set type id as EEPROM for nvmem devices
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Squash of SMBus block read patchset to save power
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] eeprom: at24: set type id as EEPROM
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• [PATCH 0/3] misc: eeprom: set type id as EEPROM for nvmem devices
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• [PATCH 3/3] eeprom: 93xx46: set type id as EEPROM
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RESEND PATCH v9 1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [RESEND PATCH v9 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [RESEND PATCH v9 0/2] i2c: add driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxx>
• [PATCH 2/3] eeprom: at25: set type id as EEPROM
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• Re: [PATCH] i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] misc: eeprom: set type id as EEPROM for nvmem devices
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• [PATCH V2 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2 3/5] misc: eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2 4/5] arm64: tegra: Add label properties for EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2 2/5] dt-bindings: eeprom: at24: Add label property for AT24
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2 5/5] arm64: tegra: Populate EEPROMs for Jetson Xavier NX
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2 0/5] Add support for custom names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: eeprom: at24: Add label property for AT24
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] i2c: Squash of SMBus block read patchset to save power
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: i2c: imx: Add properties and use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: i2c: imx-lpi2c: Add properties and use unevaluatedProperties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: aspeed: disable additional device addresses on ast2[56]xx
  • From: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Squash of SMBus block read patchset to save power
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Question on SMBUS slave transmit with PEC enabled
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH 2/2] i2c: stm32: name slave slot to ease maintenance
  • From: Alain Volmat <alain.volmat@xxxxxx>
• [PATCH 1/2] i2c: stm32: fix slot id after introduction of host-notify support
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [Intel-gfx] [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH] i2c: Switch to using the new API kobj_to_dev()
  • From: Tian Tao <tiantao6@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: ingenic: Add compatible string for the JZ4770
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: jz4780: Remove of_match_ptr()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/2] i2c: smbus: Allow throttling of transfers to client devices
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH AUTOSEL 5.8 25/29] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v1] i2c: ismt: Add support for Intel Emmitsburg PCH
  • From: "Seth Heasley (Linux)" <seth.heasley@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] Throttle I2C transfers to UCD9000 devices
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 19/22] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 12/15] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/10] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] hwmon: (pmbus/ucd9000) Throttle SMBus transfers to avoid poor behaviour
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 7/8] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 16/19] i2c: algo: pca: Reapply i2c bus settings after reset
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 1/2] i2c: stm32: fix error message on upon dma_request_chan & defer handling
  • From: Alain Volmat <alain.volmat@xxxxxx>
• [PATCH v2 2/2] i2c: stm32: Simplify with dev_err_probe()
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] Avoid meaningless DMA error print & use dev_err_probe
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: add slave testunit driver
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH v2 1/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: i801: Simplify the suspend callback
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: i801: Fix resume bug
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-mt65xx: Update binding example
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [PATCH v3] i2c: Squash of SMBus block read patchset to save power
  • From: Sultan Alsawaf <sultan@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] input: misc: Add IBM Operation Panel driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: [PATCH v5 00/16] Allwinner A100 Initial support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c: mediatek: Fix generic definitions for bus frequencies
  • From: <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH] i2c: do not acpi/of match device in i2c_device_probe()
  • From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.9
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v4 1/1] i2c: algo-pca: Reapply i2c bus settings after reset
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PULL REQUEST] i2c for v5.9
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: add slave testunit driver
  • From: Alain Volmat <alain.volmat@xxxxxx>
• Re: [PATCH v8 0/6] Support running driver's probe for a device powered off
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  • From: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] nvmem: core: allow to register cells during nvmem registration
  • From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
• Re: [PATCH] i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/6] at24: Support probing while off
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: xiic: Drop broken interrupt handler
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH 1/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/1] i2c: add slave testunit driver
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH] i2c: stm32: do not display error when DMA is not requested
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32: do not display error when DMA is not requested
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH 3/5] misc: eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [trivial PATCH] treewide: Convert switch/case fallthrough; to break;
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v2 1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver
  • From: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
• [PATCH 4/5] arm64: tegra: Add label properties for EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH 5/5] arm64: tegra: Populate EEPROMs for Jetson Xavier NX
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: aspeed: Mask IRQ status to relevant bits
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QXP compatible matching
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>