[PATCH v2 1/3] i2c: imx: Fix reset of I2SR_IAL flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().

Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/i2c/busses/i2c-imx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0ab5381aa012..34648df7f1a6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -424,7 +424,12 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
 
 		/* check for arbitration lost */
 		if (temp & I2SR_IAL) {
-			temp &= ~I2SR_IAL;
+			/*
+			 * i2sr_clr_opcode is the value to clear all interrupts.
+			 * Here we want to clear only I2SR_IAL, so we write
+			 * ~i2sr_clr_opcode with just the I2SR_IAL bit toggled.
+			 */
+			temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IAL;
 			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 			return -EAGAIN;
 		}
@@ -623,8 +628,12 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
-		temp &= ~I2SR_IIF;
-		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+		/*
+		 * i2sr_clr_opcode is the value to clear all interrupts.
+		 * Here we want to clear only I2SR_IIF, so we write
+		 * ~i2sr_clr_opcode with just the I2SR_IIF bit toggled.
+		 */
+		temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ I2SR_IIF;
 		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux