[PATCH v9 25/32] i2c: tegra: Factor out hardware initialization into separate function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Factor out hardware initialization into a separate function from the probe
function. The only place where runtime PM needs to be resumed during probe
is the place of hardware initialization, hence it makes sense to factor
out it in order to have a bit cleaner error handling in tegra_i2c_probe().

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Tested-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 2d18a35dc18c..d8fc5cdcc310 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1661,9 +1661,23 @@ static void tegra_i2c_release_clocks(struct tegra_i2c_dev *i2c_dev)
 	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
 }
 
+static int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		dev_err(i2c_dev->dev, "runtime resume failed: %d\n", ret);
+	else
+		ret = tegra_i2c_init(i2c_dev);
+
+	pm_runtime_put(i2c_dev->dev);
+
+	return ret;
+}
+
 static int tegra_i2c_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
 	struct tegra_i2c_dev *i2c_dev;
 	struct resource *res;
 	int ret;
@@ -1729,15 +1743,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	if (!i2c_dev->is_vi)
 		pm_runtime_irq_safe(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
-	ret = pm_runtime_get_sync(i2c_dev->dev);
-	if (ret < 0) {
-		dev_err(dev, "runtime resume failed\n");
-		goto put_rpm;
-	}
 
-	ret = tegra_i2c_init(i2c_dev);
+	ret = tegra_i2c_init_hardware(i2c_dev);
 	if (ret)
-		goto put_rpm;
+		goto release_rpm;
 
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
 	i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
@@ -1758,14 +1767,11 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
 	if (ret)
-		goto put_rpm;
-
-	pm_runtime_put(&pdev->dev);
+		goto release_rpm;
 
 	return 0;
 
-put_rpm:
-	pm_runtime_put_sync(&pdev->dev);
+release_rpm:
 	pm_runtime_disable(&pdev->dev);
 
 	tegra_i2c_release_dma(i2c_dev);
-- 
2.27.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux