[PATCH AUTOSEL 5.8 19/20] i2c: mediatek: Send i2c master code at more than 1MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Qii Wang <qii.wang@xxxxxxxxxxxx>

[ Upstream commit b44658e755b5a733e9df04449facbc738df09170 ]

The master code needs to being sent when the speed is more than
I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
latest I2C-bus specification and user manual.

Signed-off-by: Qii Wang <qii.wang@xxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-mt65xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index deef69e569062..440b12eba1e3c 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -736,7 +736,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
 		clk_src = parent_clk / clk_div;
 
-		if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
+		if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 			/* Set master code speed register */
 			ret = mtk_i2c_calculate_speed(i2c, clk_src,
 						      I2C_MAX_FAST_MODE_FREQ,
-- 
2.25.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux