RE: [PATCH V4 2/3] i2c: qup: Fix wrong value of index variable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+Wolfram Sang

>-----Original Message-----
>From: linux-arm-kernel [mailto:linux-arm-kernel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Sricharan R
>Sent: Friday, June 10, 2016 11:38 PM
>To: linux-arm-msm@xxxxxxxxxxxxxxx; ntelkar@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>andy.gross@xxxxxxxxxx; linux-i2c@xxxxxxxxxxxxxxx; agross@xxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
>nkaje@xxxxxxxxxxxxxx; absahu@xxxxxxxxxxxxxx
>Cc: sricharan@xxxxxxxxxxxxxx
>Subject: [PATCH V4 2/3] i2c: qup: Fix wrong value of index variable
>
>index gets incremented during check to determine if the
>messages can be transferred with dma. But not reset after
>that, resulting in wrong start value in subsequent loop,
>causing failure. Fix it.
>
>Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>---
> drivers/i2c/busses/i2c-qup.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
>index 43adc2d..b8116e5 100644
>--- a/drivers/i2c/busses/i2c-qup.c
>+++ b/drivers/i2c/busses/i2c-qup.c
>@@ -1260,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
> 		}
> 	}
>
>+	idx = 0;
>+
> 	do {
> 		if (msgs[idx].len == 0) {
> 			ret = -EINVAL;
>--
>QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux
>Foundation
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux