Hi Mark,
On 2016/6/22 18:25, Mark Rutland wrote:
> On Wed, Jun 22, 2016 at 04:55:26PM +0800, Pan Wen wrote:
>> add Hisilicon BVT I2C controller driver support.
>>
>> Signed-off-by: Pan Wen <wenpan@xxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/i2c/i2c-hibvt.txt | 24 +
>> drivers/i2c/busses/Kconfig | 10 +
>> drivers/i2c/busses/Makefile | 1 +
>> drivers/i2c/busses/i2c-hibvt.c | 736 +++++++++++++++++++++
>> 4 files changed, 771 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hibvt.txt
>> create mode 100644 drivers/i2c/busses/i2c-hibvt.c
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-hibvt.txt b/Documentation/devicetree/bindings/i2c/i2c-hibvt.txt
>> new file mode 100644
>> index 0000000..3aa2cee
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-hibvt.txt
>> @@ -0,0 +1,24 @@
>> +Hisilicon BVT I2C master controller
>> +
>> +Required properties:
>> +- compatible: should be "hisilicon,hibvt-i2c".
>> +- reg: physical base address of the controller and length of memory mapped.
>> + region.
>> +- interrupts: interrupt number to the cpu.
>> +- clocks: phandles to input clocks.
>> +
>> +Optional properties:
>> +- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000.
>> +
>> +Other properties:
>> +see Documentation/devicetree/bindings/i2c/i2c.txt.
>> +
>> +Examples:
>> +i2c_bus0: i2c@12110000 {
>> + compatible = "hisilicon,hibvt-i2c";
>> + reg = <0x12110000 0x100>;
>> + interrupts = <20>;
>> + clocks = <&crg_ctrl HI3516CV300_APB_CLK>;
>> + clock-names = "apb_pclk";
>> + clock-frequency = <100000>;
>> +};
>
> The clock-names property was not described above, and the driver doesn't
> appear to use it.
>
> Please explciitly describe the clock-names you expect, and use them in
> the driver. If there is a single clock, then you can simply drop the
> clock-names property from the example.
>
> Thanks,
> Mark.
>
OK. Thanks for your comments. I will drop the clock-names property from the example in next version.
Thanks,
Pan.
>> + i2c->clk = devm_clk_get(&pdev->dev, NULL);
>> + if (IS_ERR(i2c->clk)) {
>> + dev_err(i2c->dev, "cannot get clock\n");
>> + return -ENOENT;
>> + }
>> + clk_prepare_enable(i2c->clk);
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
