[PATCH v3] i2c: xlp9xx: add ACPI support for Broadcom Vulcan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added ACPI support for the I2C controller present on Broadcom's
Vulcan ARM64 processor. ACPI ID used by the controller is BRCM9007.

Changed the xlp9xx_i2c_get_frequency() function to use
device_property_read_u32() API so that the "clock-frequency" value
can be read from _DSD in ACPI mode.

Signed-off-by: Tanmay Jagdale <tanmay.jagdale@xxxxxxxxxxxx>
---
Changes in v3:
	Sorted header file inclusion.
	Rename vulcan_i2c_acpi_ids to xlp9xx_i2c_acpi_ids to stay
	consistent with rest of the driver.

Changes in v2:
	Changed of_property_read_u32() to device_property_read_u32()
	so that the "clock-frequency" can be read from DTS or ACPI.

 drivers/i2c/busses/i2c-xlp9xx.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index c941418..55a7bef 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -6,6 +6,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/acpi.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -341,11 +342,10 @@ static struct i2c_algorithm xlp9xx_i2c_algo = {
 static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 				    struct xlp9xx_i2c_dev *priv)
 {
-	struct device_node *np = pdev->dev.of_node;
 	u32 freq;
 	int err;
 
-	err = of_property_read_u32(np, "clock-frequency", &freq);
+	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
 	if (err) {
 		freq = XLP9XX_I2C_DEFAULT_FREQ;
 		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
@@ -429,12 +429,21 @@ static const struct of_device_id xlp9xx_i2c_of_match[] = {
 	{ /* sentinel */ },
 };
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
+	{"BRCM9007", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, xlp9xx_i2c_acpi_ids);
+#endif
+
 static struct platform_driver xlp9xx_i2c_driver = {
 	.probe = xlp9xx_i2c_probe,
 	.remove = xlp9xx_i2c_remove,
 	.driver = {
 		.name = "xlp9xx-i2c",
 		.of_match_table = xlp9xx_i2c_of_match,
+		.acpi_match_table = ACPI_PTR(xlp9xx_i2c_acpi_ids),
 	},
 };
 
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux