Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- Re: [RFC 00/17] clk: Add per-controller locks to fix deadlocks, (continued)
[PATCH v2 0/8] devicetree cleanup for i2c muxes/arbs/gates,
Peter Rosin
- [PATCH v2 3/8] dt-bindings: i2c: add support for 'i2c-gate' subnode, Peter Rosin
- [PATCH v2 5/8] i2c: mux: add support for 'i2c-mux', 'i2c-arb' and 'i2c-gate' DT subnodes, Peter Rosin
- [PATCH v2 7/8] i2c: pca9541: add device tree binding, Peter Rosin
- [PATCH v2 8/8] i2c: pca954x: add device tree binding, Peter Rosin
- [PATCH v2 6/8] i2c: mux: inform the i2c mux core about how it is used, Peter Rosin
- [PATCH v2 4/8] dt-bindings: i2c: add bindings for nxp,pca9541, Peter Rosin
- [PATCH v2 1/8] dt-bindings: i2c: add support for 'i2c-mux' subnode, Peter Rosin
- [PATCH v2 2/8] dt-bindings: i2c: add support for 'i2c-arb' subnode, Peter Rosin
- Re: [PATCH v2 0/8] devicetree cleanup for i2c muxes/arbs/gates, Wolfram Sang
[PATCH] i2c: bcm-kona: fix inconsistent indenting,
Wolfram Sang
[PATCH] i2c: mux: demux-pinctrl: properly roll back when adding adapter fails,
Wolfram Sang
[PATCH 0/8] i2c: designware: Support fast mode plus and high speed,
Jarkko Nikula
- [PATCH 1/8] i2c: designware: Move clk_freq into struct dw_i2c_dev, Jarkko Nikula
- [PATCH 2/8] i2c: designware: get fast plus and high speed *CNT configuration, Jarkko Nikula
- [PATCH 3/8] i2c: designware: Enable fast mode plus, Jarkko Nikula
- [PATCH 4/8] i2c: designware: set the common config before the if else, Jarkko Nikula
- [PATCH 5/8] i2c: designware: Enable high speed mode, Jarkko Nikula
- [PATCH 6/8] i2c: core: Cleanup I2C ACPI namespace, take 2, Jarkko Nikula
- [PATCH 7/8] i2c: core: Add function for finding the bus speed from ACPI, take 2, Jarkko Nikula
- [PATCH 8/8] i2c: designware: Find bus speed from ACPI, Jarkko Nikula
- Re: [PATCH 0/8] i2c: designware: Support fast mode plus and high speed, Andy Shevchenko
- Re: [PATCH 0/8] i2c: designware: Support fast mode plus and high speed, Wolfram Sang
[PATCH v2] eeprom: at24: check if the chip is functional in probe(),
Bartosz Golaszewski
[PATCH] i2c: brcmstb: Fix START and STOP conditions,
Jaedon Shin
[PATCH 0/6] Some Tegra I2C Updates,
Jon Hunter
[RESEND PATCH 0/2] cros_ec: utilize cros_ec_cmd_xfer_status(),
Brian Norris
[PATCH] eeprom: at24: check if the chip is functional in probe(),
Bartosz Golaszewski
[PATCH] i2c: slave framework support for SMBus Alert,
Brendan Higgins
[PATCH v2] i2c-tools: add .gitignore,
Wolfram Sang
[PATCH v2] i2c-tools: fix feature test macros for glibc >= 2.20, Wolfram Sang
[PATCH] i2c: uniphier{-f}: don't print error when adding adapter fails,
Wolfram Sang
[wsa:strings/usb-no-enomem 117/125] drivers/usb/renesas_usbhs/mod_host.c:170:17: warning: unused variable 'dev', kbuild test robot
[wsa:strings/usb_alloc_urb 52/80] drivers/net/wireless/realtek/rtlwifi/usb.c:907:19: warning: unused variable 'rtlpriv', kbuild test robot
[PATCH v4 0/2] Add support for the TI SM-USB-DIG,
Andrew F. Davis
[PATCH] i2c: don't print error when adding adapter fails,
Wolfram Sang
- [PATCH] i2c: don't print error when adding adapter fails, Wolfram Sang
- Re: [PATCH] i2c: don't print error when adding adapter fails, Peter Korsgaard
- Re: [PATCH] i2c: don't print error when adding adapter fails, Grygorii Strashko
- Re: [PATCH] i2c: don't print error when adding adapter fails, Uwe Kleine-König
- Re: [PATCH] i2c: don't print error when adding adapter fails, Heiko Stübner
- Re: [PATCH] i2c: don't print error when adding adapter fails, Neil Horman
- Re: [PATCH] i2c: don't print error when adding adapter fails, Thierry Reding
- Re: [PATCH] i2c: don't print error when adding adapter fails, Guenter Roeck
- Re: [PATCH] i2c: don't print error when adding adapter fails, Ray Jui
- Re: [PATCH] i2c: don't print error when adding adapter fails, Vladimir Zapolskiy
- Re: [PATCH] i2c: don't print error when adding adapter fails, Krzysztof Kozlowski
- Re: [PATCH] i2c: don't print error when adding adapter fails, Laxman Dewangan
- Re: [PATCH] i2c: don't print error when adding adapter fails, Ludovic Desroches
- Re: [PATCH] i2c: don't print error when adding adapter fails, Joachim Eastwood
- Re: [STLinux Kernel] [PATCH] i2c: don't print error when adding adapter fails, Patrice Chotard
- Re: [PATCH] i2c: don't print error when adding adapter fails, Wolfram Sang
[PATCH 0/4] media: don't print error when adding adapter fails,
Wolfram Sang
[PATCH 4/4] media: usb: dvb-usb-v2: dvb_usb_core: don't print error when adding adapter fails, Wolfram Sang
[PATCH 3/4] media: platform: exynos4-is: fimc-is-i2c: don't print error when adding adapter fails, Wolfram Sang
[PATCH 2/4] media: pci: pt3: don't print error when adding adapter fails, Wolfram Sang
[PATCH 0/5] gpu: don't print error when adding adapter fails,
Wolfram Sang
[PATCH] video: don't print error when adding adapter fails,
Wolfram Sang
Re: Debian Jessie on QNAP TS-112P - Reboot instead of shutdown, Uwe Kleine-König
[PATCH 00/11] use of_property_read_bool,
Julia Lawall
[PATCH] i2c: ocores: add missed clk_disable_unprepare() on failure paths,
Alexey Khoroshilov
[PATCH] i2c: at91: fix support of the "alternative command" feature,
Ludovic Desroches
[PATCH v0 0/4] Use complete() instead of complete_all(),
Daniel Wagner
[PATCH] i2c-tools: add .gitignore,
Wolfram Sang
[PATCH] i2c-tools: fix feature test macros for glibc >= 2.20,
Wolfram Sang
[PATCH 0244/1285] Replace numeric parameter like 0444 with macro,
Baole Ni
Re: [pasemi] problem with i2c-pasemi,
Wolfram Sang
[PATCH v3] i2c: hibvt: add Hisilicon BVT I2C controller driver,
Pan Wen
[Patch V2] i2c: imx: add low power i2c bus driver,
Gao Pan
[PATCH 0/2] i2c: move adapter locking ops to struct, constify,
Peter Rosin
[PATCH v3 0/3] i2c: designware: improve performance for transfers,
Lucas De Marchi
[PATCH 0/5] i2c: Host Notify / i801 fixes,
Benjamin Tissoires
[PULL REQUEST] i2c for 4.8,
Wolfram Sang
[PATCH 0/7] devicetree cleanup for i2c muxes/arbs/gates,
Peter Rosin
[RFC PATCH 0/1] i2c: i2c-mux-pca954x: Add interrupt controller support,
Phil Reid
[PATCH v3] i2c: i2c-cros-ec-tunnel: Reduce logging noise,
Guenter Roeck
[PATCH v2] i2c: i2c-cros-ec-tunnel: Reduce logging noise,
Guenter Roeck
[PATCH] i2c: i2c-cros-ec-tunnel: Reduce logging noise,
Guenter Roeck
[PATCH 0/2] cros_ec: utilize cros_ec_cmd_xfer_status(),
Brian Norris
[PATCH v1 1/1] i2c: i801: Add support for Kaby Lake PCH-H,
Andy Shevchenko
[PATCH v2 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge, Jan Kandziora
[PATCH v2 1/2] wire: export w1_touch_bit, Jan Kandziora
[PATCH 1/2] Documentation: i2c: slave: describe buffer problems a bit better,
Wolfram Sang
i2c: slave support framework improvements,
Kachalov Anton
[PATCH v2] i2c: designware-baytrail: Fix the Kconfig dependency fix,
Jean Delvare
[PATCH] i2c: i801: use IS_ENABLED() instead of checking for built-in or module,
Javier Martinez Canillas
[PATCH] i2c: i2c-mv64xxx: add suspend/resume support,
Grzegorz Jaszczyk
RFI: I2c muxes I2C_MUX_LOCKED and interrupt support,
Phil Reid
[RFC v2] regmap: Add regmap_pipe_read API,
Crestez Dan Leonard
[PATCH v2] 2c: mv64xxx: Use clk_enable_prepare and clk_disable_unprepare,
Amitoj Kaur Chawla
[PATCH] i2c: i2c-smbus: drop useless stubs,
Jean Delvare
Re: [PATCH] staging: iio: light: isl29018/28: remove I2C_CLASS_HWMON .class setting,
Jonathan Cameron
[PATCH] i2c: Update the description of I2C_SMBUS,
Jean Delvare
[PATCH] eeprom: at24: tweak the loop_until_timeout() macro,
Bartosz Golaszewski
[PATCH 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge,
Jan Kandziora
[PATCH 1/2] wire: export w1_touch_bit, Jan Kandziora
[PATCH] i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation,
Jean Delvare
[PATCH] i2c: efm32: fix a failure path in efm32_i2c_probe(),
Alexey Khoroshilov
[PATCH v5 0/2] Add ACPI support and SMBus block read,
Austin Christ
[v2 0/2] i2c: brcmstb: Add support for BMIPS_GENERIC,
Jaedon Shin
[PULL REQUEST] i2c for v4.7, Wolfram Sang
[PATCH v2 0/3] Init device ids from ACPI of_compatible,
Crestez Dan Leonard
Introducing a kernel driver for the DS28E17 Onewire to I2C master bridge; Feature request: introduce I2C_FUNC_STOP,
Jan Kandziora
[PATCH v3 0/2] Add support for Smart Battery System Manager,
Karl-Heinz Schneider
[PATCH v2] i2c: hibvt: add Hisilicon BVT I2C controller driver,
Pan Wen
[wsa:strings/i2c 81/92] drivers/i2c/busses/i2c-uniphier-f.c:549:3: error: label 'err' used but not defined, kbuild test robot
[wsa:strings/i2c 30/92] drivers/gpu/drm/msm/hdmi/hdmi_i2c.c:246:21: warning: unused variable 'dev', kbuild test robot
[RESEND][PATCH 1/2] i2c: versatile: Allow compile test build,
Axel Lin
[PATCH 0/7] i2c: improve error messages when registering an adapter,
Wolfram Sang
[PATCH v7 0/8] ACPI overlays,
Octavian Purdila
Re: I/O address 0x0cd6 already in use, Guenter Roeck
[PATCH] i2c: imx: add retries for i2c-0 on Ventana boards,
Tim Harvey
[PATCH v2] i2c: meson: allow build with COMPILE_TEST,
Ben Dooks
[PATCH 0/2] i2c-dev: Don't let userspace block adapter,
Viresh Kumar
[PATCH] i2c: meson: allow build with COMPILE_TEST,
Ben Dooks
[PATCH 0/6] Implement I2C restart handler,
Stefan Christ
[PATCH v6 6/8] efi: load SSTDs from EFI variables,
Octavian Purdila
portable device tree connector -- problem statement,
Frank Rowand
[RFC PATCH 0/1] Portable Device Tree Connector -- conceptual,
frowand . list
[PATCH v5 0/8] ACPI overlays,
Octavian Purdila
[GIT PULL] i2c: 'i2c-bus' node support for v4.8-rc1,
Thierry Reding
Portable Device Tree Connector -- conceptual,
Frank Rowand
[PATCH v2 0/2] Add support for Smart Battery System Manager,
Karl-Heinz Schneider
[PATCH V2 00/11] Add support for Tegra DPAUX pinctrl,
Jon Hunter
- [PATCH V2 02/11] drm/tegra: Clean-up if probing DPAUX fails, Jon Hunter
- [PATCH V2 03/11] drm/tegra: Add helper functions for setting up DPAUX pads, Jon Hunter
- [PATCH V2 05/11] drm/tegra: Prepare DPAUX for supporting generic PM domains, Jon Hunter
- [PATCH V2 01/11] soc/tegra: pmc: Initialise resets associated with a power partition, Jon Hunter
- [PATCH V2 04/11] dt-bindings: display: Update Tegra DPAUX documentation, Jon Hunter
- [PATCH V2 07/11] i2c: core: Add support for 'i2c-bus' subnode, Jon Hunter
- [PATCH V2 09/11] drm/tegra: Add pinctrl support for DPAUX, Jon Hunter
- [PATCH V2 10/11] arm64: tegra: Add SOR power-domain node, Jon Hunter
- [PATCH V2 11/11] arm64: tegra: Add DPAUX pinctrl bindings, Jon Hunter
- [PATCH V2 08/11] dt-bindings: Add bindings for Tegra DPAUX pinctrl driver, Jon Hunter
- [PATCH V2 06/11] dt-bindings: i2c: Add support for 'i2c-bus' subnode, Jon Hunter
- Re: [PATCH V2 00/11] Add support for Tegra DPAUX pinctrl, Thierry Reding
[Patch v1] i2c: imx: add low power i2c bus driver, Gao Pan
i2c-ismt: IRDPE error,
為溢(阿尼先生)
[PATCH] i2c: mv64xxx: Use clk_enable_prepare and clk_disable_unprepare,
Amitoj Kaur Chawla
Sensor with 7 bit address above 0x77,
David Oberhollenzer
[PATCH] i2c: i2c-mux-reg: wrong condition checked for of_address_to_resource return value,
Lukasz Gemborowski
[PATCH] dt-bindings: i2c: add bindings for nxp,pca9541,
Peter Rosin
[PATCH 1/3] Documentation: dt: i2c: use correct STMicroelectronics vendor prefix,
Stefan Agner
[PATCH v9 1/2] i2c: i801: add support of Host Notify,
Benjamin Tissoires
i2c-i801 / SMBus timeouts on BayTrail board (U-Boot),
Stefan Roese
[PATCH 00/12] Add support for Tegra DPAUX pinctrl,
Jon Hunter
- [PATCH 01/12] soc/tegra: pmc: Initialise resets associated with a power partition, Jon Hunter
- [PATCH 02/12] drm/tegra: Clean-up if probing DPAUX fails, Jon Hunter
- [PATCH 03/12] drm/tegra: Add helper functions for setting up DPAUX pads, Jon Hunter
- [PATCH 04/12] dt-bindings: display: Update Tegra DPAUX documentation, Jon Hunter
- [PATCH 05/12] drm/tegra: Prepare DPAUX for supporting generic PM domains, Jon Hunter
- [PATCH 06/12] pinctrl: pinconf: Add generic helper function for freeing mappings, Jon Hunter
- [PATCH 07/12] dt-bindings: i2c: Add support for 'i2c-bus' subnode, Jon Hunter
- [PATCH 08/12] i2c: core: Add support for 'i2c-bus' subnode, Jon Hunter
- [PATCH 09/12] dt-bindings: Add bindings for Tegra DPAUX pinctrl driver, Jon Hunter
- [PATCH 10/12] drm/tegra: Add pinctrl support for DPAUX, Jon Hunter
- [PATCH 11/12] arm64: tegra: Add SOR power-domain node, Jon Hunter
- [PATCH 12/12] arm64: tegra: Add DPAUX pinctrl bindings, Jon Hunter
[PATCH 0/2] Add support for Smart Battery System Manager,
Karl-Heinz Schneider
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
