Re: portable device tree connector -- problem statement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/05/16 01:31, Mark Brown wrote:
> On Mon, Jul 04, 2016 at 01:58:53PM -0700, Frank Rowand wrote:
> 
>> On the other hand, I have no previous detailed knowledge of the beagle
>> family.
> 
> This is in no way specific to the BeagleBones, there's plenty of other
> boards out there with similar setups like the Raspberry Pi and its
> derivatives.

Yes, absolutely.  I'm just picking on the beaglebones because that is
what Pantelis has recently used for examples.  (He has mentioned other
connector types and expansion boards in his presentations.)

And we need to think beyond beaglebone, pi, arduino, and grove 
type of connectors.

Some other connectors that are obvious are pci and possibly usb.


>>     - for bones with the same pinout:
>>       - the pins are routed to different function blocks on the
>>         SOC because different bones may have different SOCs?
>>         - the different functional blocks are compatible or not?
> 
> This is the general case, there will be a substantial level of
> compatibility between different base boards by virtue of the pinouts
> being the same but obviously there will be some variation in the
> specifics (and even where that exists it may not be enough to be visible
> at the DT level for the most part).  That said there will doubtless be
> some plug in modules that want to rely on the specifics of a given base
> board rather than remain compatible with general users of the interface.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux