Hi, On Mon, May 16, 2016 at 6:57 AM, David Wu <david.wu@xxxxxxxxxxxxxx> wrote: > There are three points differert from others: > - new method to caculate i2c timings for rk3399 > - pclk and function clk are separated at rk3399 > - add fast-plus mode supported for rk3399 > > David Wu (8): > i2c: rk3x: add documentation to fields in "struct rk3x_i2c" > i2c: rk3x: use struct "rk3x_i2c_calced_timings" > i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd() > i2c: rk3x: Change SoC data to not use array > i2c: rk3x: Move spec timing data to "static const" structs > dt-bindings: i2c: rk3x: add support for rk3399 > i2c: rk3x: add i2c support for rk3399 soc > i2c: rk3x: support fast-mode plus for rk3399 > > Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +- > drivers/i2c/busses/i2c-rk3x.c | 498 +++++++++++++++++---- > 2 files changed, 434 insertions(+), 80 deletions(-) I haven't put these on the scope or anything, but I have: * Tested that my i2c busses on rk3288-veyron still seem to work OK after these patches. * Tested that my i2c busses on an rk3399 board seem to work after these patches (plus device tree changes). Thus, for the series: Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx> ...possibly could leave off the Tested-by tag for the last in the series since I have no Fast Mode Plus devices to test against. ;) -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
