Linux CAN Development - Date Index

• Thread Index

• RE: [PATCH linux-can-next] can: flexcan: add correctable errors correction when HW supports ECC
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH] net: slcan, slip -- no need for goto when if () will do
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] net: slcan, slip -- no need for goto when if () will do
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Need help in interpreting ip status output
  • From: André Hartmann <aha_1980@xxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 06/16] can: add missing attribute validation for termination
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH net 06/16] can: add missing attribute validation for termination
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in slcan_open
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: KASAN: use-after-free Read in slcan_open
  • From: syzbot <syzbot+b5ec6fd05ab552a78532@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH can-next 2/2] net: m_can: Fix freeing of can device from peripherials
  • From: Dan Murphy <dmurphy@xxxxxx>
• [RESEND PATCH can-next 1/2] can: tcan4x5x: Rename parse_config function
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: WARNING: refcount bug in j1939_netdev_start (2)
  • From: syzbot <syzbot+85d9878b19c94f9019ad@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH can-next] can: tcan4x5x: Rename parse_config function
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: mcp251x: Use readx_poll_timeout() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-master 1/3] can: tcan4x5x: Move clock init to TCAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-master 1/3] can: tcan4x5x: Move clock init to TCAN driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] can: mcp251x: convert to half-duplex SPI
  • From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
• general protection fault in j1939_netdev_start
  • From: syzbot <syzbot+f03d384f3455d28833eb@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• RE: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [RFC] can: af_can: can_rcv() canfd_rcv(): Fix access of uninitialized memory or out of bounds
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: KMSAN: uninit-value in number (2)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• KMSAN: uninit-value in number (2)
  • From: syzbot <syzbot+9bcb0c9409066696d3aa@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH linux-master 1/3] can: tcan4x5x: Move clock init to TCAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-master 1/3] can: tcan4x5x: Move clock init to TCAN driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/3] can: m_can: m_can_platform: Add support for enabling transceiver
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH v2 2/3] can: m_can: m_can_platform: Add support for enabling transceiver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH linux-master 0/3] MCAN updates for clock discovery
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindinsg: net: can: Convert can-transceiver to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: mcp25xxfd: missing cerrif
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• Re: J1939: Unable to receive and transmit multi-frame messages
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: canfd through slcan via SocketCAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: canfd through slcan via SocketCAN
  • From: Chris Morgan <chmorgan@xxxxxxxxx>
• [PATCH][next] can: peak_canfd: replace zero-length array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• J1939: Unable to receive and transmit multi-frame messages
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• Re: canfd through slcan via SocketCAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v1] can: mcp251x: Use readx_poll_timeout() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] can: m_can: m_can_platform: Add support for enabling transceiver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH v2 2/3] can: m_can: m_can_platform: Add support for enabling transceiver
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH v2 3/3] arm64: defconfig: Add Support for Bosch M_CAN controllers
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH v2 0/3] Add Support for MCAN in AM654x-idk
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• canfd through slcan via SocketCAN
  • From: Chris Morgan <chmorgan@xxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] can: flexcan: fix spelling mistake "reserverd" -> "reserved"
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: mcp25xxfd: missing cerrif
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in j1939_tp_txtimer()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Pankaj Bansal <pankaj.bansal@xxxxxxx>
• RE: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 0/8] can: flexcan: add CAN FD support for NXP Flexcan
  • From: Michael Walle <michael@xxxxxxxx>
• FW: [PATCH] can/peak_canfd: fix echo management when loopback is on
  • From: Stéphane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH linux-can-next] can: flexcan: add correctable errors correction when HW supports ECC
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: mcp25xxfd: missing cerrif
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• Re: mcp25xxfd: missing cerrif
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: mcp25xxfd: missing cerrif
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• mcp25xxfd: missing cerrif
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp25xxfd: minor register definition fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp25xxfd: minor register definition fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: mcp25xxfd: minor register definition fixes
  • From: Thomas Kopp <thomas.kopp@xxxxxxxxxxxxx>
• [mkl-can-next:v5.4/mcp25xxfd 5/99] drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c:1305 mcp25xxfd_irq() warn: ignoring unreachable code.
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [mkl-can-next:v5.4/mcp25xxfd 6/99] drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c:1729:18: error: 'struct mcp25xxfd_priv' has no member named 'cnt'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v4 0/2] Convert bosch,m_can to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v4 1/2] dt-bindinsg: net: can: Convert can-transceiver to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v3 1/2] dt-bindinsg: net: can: Convert can-transceiver to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v3 2/2] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v3 0/2] Convert bosch,m_can to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindinsg: net: can: Convert can-transceiver to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: Help to set up can net interface on Dell 3200 Intel Atom
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: Is /dev/ttyACM0 of ATMEL serial CAN bus ?
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Is /dev/ttyACM0 of ATMEL serial CAN bus ?
  • From: "Lev R. Oshvang ." <levonshe@xxxxxxxxx>
• Re: Help to set up can net interface on Dell 3200 Intel Atom
  • From: "Lev R. Oshvang ." <levonshe@xxxxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Gediminas Simanskis <gediminas@xxxxxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• can-utils update for Debian
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Help to set up can net interface on Dell 3200 Intel Atom
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can/peak_canfd: fix echo management when loopback is on
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Help to set up can net interface on Dell 3200 Intel Atom
  • From: "Lev R. Oshvang ." <levonshe@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 0/2] Convert bosch,m_can to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH v2 1/2] dt-bindinsg: net: can: Convert can-transceiver to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH linux-master 1/3] can: tcan4x5x: Move clock init to TCAN driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH linux-master 0/3] MCAN updates for clock discovery
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH linux-master 3/3] can: m_can: Remove unused clock function from the framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH linux-master 2/3] can: m_can_platform: Move clock discovery and init to platform
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] bonding: do not enslave CAN devices
  • From: Sabrina Dubroca <sd@xxxxxxxxxxxxxxx>
• [PATCH] bonding: do not enslave CAN devices
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH RFC] can-utils: candump: remove bridging functionality
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: m_can: the state change mistake
  • From: Wu Bo <wubo.oduw@xxxxxxxxx>
• [PATCH] can: m_can: the state change mistake
  • From: Wu Bo <wubo.oduw@xxxxxxxxx>
• Tutorial to use the M_CAN IP cores with a STM32MP157A-DK1 dev kit
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 4.4 160/183] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.19 01/92] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 234/271] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 001/104] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 01/46] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] dt-bindings: net: can: Convert M_CAN to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [RFC] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add Support for MCAN in AM654x-idk
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add Support for MCAN in AM654x-idk
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH 0/3] Add Support for MCAN in AM654x-idk
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: [PATCH v3] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: David Miller <davem@xxxxxxxxxxxxx>
• RE: [PATCH 2/3] can: m_can: m_can_platform: Add support for enabling transceiver through the STB line
  • From: "Sriram Dash" <sriram.dash@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH 3/3] arm64: defconfig: Add Support for Bosch M_CAN controllers
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH 2/3] can: m_can: m_can_platform: Add support for enabling transceiver through the STB line
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH 0/3] Add Support for MCAN in AM654x-idk
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
  • From: Richard Palethorpe <rpalethorpe@xxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: VCAN and CAN-FD DLC versus data length
  • From: Andre Naujoks <nautsch2@xxxxxxxxx>
• Re: general protection fault in can_rx_register
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: VCAN and CAN-FD DLC versus data length
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• general protection fault in can_rx_register
  • From: syzbot <syzbot+c3ea30e1e2485573f953@xxxxxxxxxxxxxxxxxxxxxxxxx>
• VCAN and CAN-FD DLC versus data length
  • From: Andre Naujoks <nautsch2@xxxxxxxxx>
• Re: KASAN: use-after-free Read in j1939_xtp_rx_abort_one
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: general protection fault in j1939_sk_bind
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: Re: general protection fault in j1939_sk_bind
  • From: syzbot <syzbot+4857323ec1bb236f6a45@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in j1939_sk_bind
  • From: syzbot <syzbot+4857323ec1bb236f6a45@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can, slip: Protect tty->disc_data access with RCU
  • From: Richard Palethorpe <rpalethorpe@xxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] can, slip: Protect tty->disc_data access with RCU
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• [PATCH] can, slip: Protect tty->disc_data access with RCU
  • From: Richard Palethorpe <rpalethorpe@xxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in j1939_xtp_rx_abort_one
  • From: syzbot <syzbot+db4869ba599c0de9b13e@xxxxxxxxxxxxxxxxxxxxxxxxx>
• WARNING: refcount bug in j1939_netdev_start (2)
  • From: syzbot <syzbot+85d9878b19c94f9019ad@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• [PATCH v2 12/17] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 15/17] dt-bindings: arm: add sam9x60-ek board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 17/17] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 14/17] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 16/17] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 13/17] dt-bindings: atmel-usart: remove wildcard
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 11/17] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 10/17] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 09/17] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 08/17] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 07/17] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 06/17] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 05/17] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 04/17] dt-bindings: atmel-tcb: add microchip,sam9x60-tcb
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 03/17] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 02/17] dt-bindings: at_xdmac: add microchip,sam9x60-dma
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 01/17] dt-bindings: at_xdmac: remove wildcard
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 00/17] add device tree for SAM9X60 SoC and SAM9X60-EK board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Applied "dt-bindings: spi_atmel: add microchip,sam9x60-spi" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC] input: cap11xx: plasma globe proof
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [RFC v3] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
  • From: Dan Murphy <dmurphy@xxxxxx>
• [BUG] pfifo_fast may cause out-of-order CAN frame transmission
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 14/16] dt-bindings: arm: add sam9x60-ek board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 08/16] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 15/16] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 12/16] dt-bindings: spi_atmel: add microchip,sam9x60-spi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 10/16] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 06/16] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 05/16] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 04/16] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 02/16] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [RFC v3] c_can: improve latency and avoid packet loss
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• Re: [RFC v3] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] c_can: improve latency and avoid packet loss
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• INFO: task hung in bcm_release
  • From: syzbot <syzbot+9d1d68a21e17513cb654@xxxxxxxxxxxxxxxxxxxxxxxxx>
• INFO: task hung in raw_release
  • From: syzbot <syzbot+aeec49cf894ac6173e92@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: pull-request: can 2020-01-02
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] mscan: fix rx path lockup when returning from polling to irq mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• pull-request: can 2020-01-02
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/9] can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/9] can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/9] can: tcan4x5x: tcan4x5x_parse_config(): fix inconsistent IS_ERR and PTR_ERR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 7/9] can: kvaser_usb: fix interface sanity check
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/9] can: tcan4x5x: tcan4x5x_parse_config(): reset device before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 9/9] can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 8/9] can: gs_usb: gs_usb_probe(): use descriptors of current altsetting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/9] can: tcan4x5x: tcan4x5x_parse_config(): Disable the INH pin device-state GPIO is unavailable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/9] can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next] can: avoid unnecessary remove in can_remove_proc
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH 6/6] cap11xx: export major chip settings to sysfs
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] cap11xx: polling mode without irq
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] cap11xx: support cap1208
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] cap11xx: add register definition for LED_LINK
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] cap11xx: enable all 8 inputs
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] cap11xx: set device driver_data
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [RFC] input: cap11xx: plasma globe proof
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] can: tcan4x5x: reset device before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• KASAN: use-after-free Read in j1939_tp_txtimer
  • From: syzbot <syzbot+5322482fe520b02aea30@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] mscan: fix rx path lockup when returning from polling to irq mode
  • From: Florian Faber <faber@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: vendor-prefix: add prefix for Czech Technical University in Prague.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: Backporting J1939 and mcp25xxfd
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• KASAN: slab-out-of-bounds Read in j1939_tp_txtimer
  • From: syzbot <syzbot+11d6c5c51b583bea8575@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
  • From: pisa@xxxxxxxxxxxxxxxx
• [PATCH v3 1/6] dt-bindings: vendor-prefix: add prefix for Czech Technical University in Prague.
  • From: pisa@xxxxxxxxxxxxxxxx
• [PATCH v3 4/6] can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.
  • From: pisa@xxxxxxxxxxxxxxxx
• [PATCH v3 5/6] can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support.
  • From: pisa@xxxxxxxxxxxxxxxx
• [PATCH v3 0/6] CTU CAN FD open-source IP core SocketCAN driver, PCI, platform integration and documentation
  • From: pisa@xxxxxxxxxxxxxxxx
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net-next v2 2/3] dt-bindings: can: rcar_canfd: document r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v2 1/3] dt-bindings: can: rcar_can: Add r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Backporting J1939 and mcp25xxfd
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 10/11] can: c_can: support 64 message objects for D_CAN
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/11] can: c_can: runtime message object divisions
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/11] can: rx-offload: add skb queue for use during ISR
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/11] can: c_can: increase RX queue, TX queue fixed to 8
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/11] can: c_can: remove quota during isr
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/11] can: c_can: use rx-offload for echo skb
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/11] can: c_can: remove unused enum BOSCH_C_CAN_PLATFORM
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 01/11] can: rx-offload: can_rx_offload_add_manual(): add new initialization function
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/11] can: c_can: use rx-offload in IRQ handler
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/11] can: c_can: register_c_can_dev(): convert to goto style error handling
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Backporting J1939 and mcp25xxfd
  • From: Michael Frampton <Michael.Frampton@xxxxxxxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• RE: [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH net-next v2 2/3] dt-bindings: can: rcar_canfd: document r8a774b1 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH net-next v2 1/3] dt-bindings: can: rcar_can: Add r8a774b1 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V2 2/2] can: flexcan: disable clocks during stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v1] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v1] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 11/11] can: c_can: increase RX queue, TX queue fixed to 8
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/11] can: c_can: support 64 message objects for D_CAN
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/11] can: c_can: runtime message object divisions
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [RFC v3] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/11] can: c_can: support 64 message objects for D_CAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 10/11] can: c_can: message object division not hardcoded
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 11/11] can: c_can: increase RX queue
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/11] can: c_can: support 64 message objects for D_CAN
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [RFC v2] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] can: c_can: support 64 message objects for D_CAN
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] c_can: improve latency and avoid packet loss
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 10/10] can: c_can: configurable amount of D_CAN RX objects
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 09/10] can: c_can: support 64 message objects for D_CAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] can: c_can: configurable amount of D_CAN RX objects
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/10] can: c_can: remove quota during isr
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] can: rx-offload: add skb queue for use during ISR
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 01/10] can: rx-offload: can_rx_offload_add_manual(): add new initialization function
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] can: c_can: support 64 message objects for D_CAN
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/10] can: c_can: register_c_can_dev(): convert to goto style error handling
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/10] can: c_can: use rx-offload in IRQ handler
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/10] can: c_can: use rx-offload for echo skb
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/10] can: c_can: remove unused enum BOSCH_C_CAN_PLATFORM
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• [RFC] c_can: improve latency and avoid packet loss
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] can: m_can: Fix default pinmux glitch at init
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH v3] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v3] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Gediminas Simanskis <gediminas@xxxxxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Michal Sojka <michal.sojka@xxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Michal Sojka <michal.sojka@xxxxxxx>
• Re: usb_8dev - WARN_ON(in_irq())
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• [PATCH linux-can/testing] can: tcan4x5x: Disable the INH pin device-state GPIO is unavailable
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 1/2] can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2] can: tcan4x5x: remove redundant return statement
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2] can: tcan4x5x: remove redundant return statement
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] can: tcan4x5x: remove redundant return statement
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] can: tcan4x5x: remove redundant return statement
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v6 2/2] can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v6 1/2] can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v6 2/2] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v6 1/2] can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v6 2/2] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v6 1/2] can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v5 1/2] can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v5 1/2] can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v5 1/2] can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 2/2] can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v5 1/2] can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v4 1/2] can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v4 1/2] can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 2/2] can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4 1/2] can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• usb_8dev - WARN_ON(in_irq())
  • From: Michal Sojka <michal.sojka@xxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4] can: m_can: remove double clearing of clock stop request bit
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v4] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] can: m_can: remove double clearing of clock stop request bit
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH][next] can: tcan45x: Fix inconsistent IS_ERR and PTR_ERR
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: tcan4x5x: Turn on the power before parsing the config
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH][next] can: tcan45x: Fix inconsistent IS_ERR and PTR_ERR
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH][next] can: tcan45x: Fix inconsistent IS_ERR and PTR_ERR
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 0/2] can: fix USB altsetting bugs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/2] can: fix USB altsetting bugs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 1/2] can: kvaser_usb: fix interface sanity check
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 2/2] can: gs_usb: use descriptors of current altsetting
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH v3] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH v4 4/4] can: mcp251x: add GPIO support
  • From: Schlüßler, Timo <t.schluessler@xxxxxxxxx>
• Re: [mkl-can:testing 1/1] include/linux/can/dev.h:113: undefined reference to `can_skb_headroom_valid'
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] can: mcp251x: add GPIO support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH V2 2/2] can: flexcan: disable clocks during stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V2 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH 2/2] can: flexcan: disable clocks during stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 2/2] can: flexcan: disable clocks during stop mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [mkl-can:testing 1/1] include/linux/can/dev.h:113: undefined reference to `can_skb_headroom_valid'
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• RE: [PATCH 2/2] can: flexcan: disable clocks during stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 2/2] can: flexcan: disable clocks during stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 2/2] can: flexcan: disable clocks during stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH 1/2] can: flexcan: disable runtime PM if register flexcandev failed
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] can: tcan4x5x: Turn on the power before parsing the config
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] can: tcan4x5x: Turn on the power before parsing the config
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] can: tcan4x5x: Turn on the power before parsing the config
  • From: Dan Murphy <dmurphy@xxxxxx>
• [mkl-can:testing 1/1] include/linux/can/dev.h:113: undefined reference to `can_skb_headroom_valid'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3] can: m_can: remove double clearing of clock stop request bit
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3] can: m_can: remove double clearing of clock stop request bit
  • From: Dan Murphy <dmurphy@xxxxxx>
• mcp2517fd: double transmitted message after BUS-OFF
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v3] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] can: m_can: remove double clearing of clock stop request bit
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] can: m_can: remove double clearing of clock stop request bit
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: pull-request: can 2019-12-08
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Tom Prohaszka <tommy@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 02/13] MAINTAINERS: Add myself as a maintainer for TCAN4x5x
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 04/13] can: j1939: fix address claim code example
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 03/13] can: j1939: j1939_sk_bind(): take priv after lock is held
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 11/13] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 10/13] dt-bindings: can: tcan4x5x: reset pin is active high
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 07/13] can: flexcan: add low power enter/exit acknowledgment helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 08/13] can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 13/13] can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 09/13] can: m_can: tcan4x5x: add required delay after reset
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 12/13] can: tcan45x: Make wake-up GPIO an optional GPIO
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 01/13] MAINTAINERS: Add myself as a maintainer for MMIO m_can
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 06/13] can: flexcan: fix possible deadlock and out-of-order reception after wakeup
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 05/13] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• pull-request: can 2019-12-08
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: m_can: remove double clearing of clock stop request bit
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Dan Murphy <dmurphy@xxxxxx>
• RE: [PATCH] can: m_can: remove double clearing of clock stop request bit
  • From: "Sriram Dash" <sriram.dash@xxxxxxxxxxx>
• [PATCH] can: m_can: remove double clearing of clock stop request bit
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 2/2] can: m_can: tcan4x5x: reset device before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 1/2] can: m_can: tcan4x5x: put the device out of standby before register access
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH V3 0/6] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [linux-can/can-utils] Networking with CAN-J1939 support (Ubuntu Linux) ./testj1939 (#159)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MAINTAINERS: Add myself as a maintainer for MMIO m_can
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] can: mcp251x: add GPIO support
  • From: Schlüßler, Timo <t.schluessler@xxxxxxxxx>
• [PATCH] can: ensure an initialized headroom in outgoing CAN sk_buffs
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices
  • From: Xiaolong Huang <butterflyhuangxx@xxxxxxxxx>
• Re: [PATCH V3 0/6] can: flexcan: fixes for stop mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1] can: j1939: j1939_sk_bind(): take priv after lock is held
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] can: mcp251x: add GPIO support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2 v2] can/peak_usb/pcan_usb: add rxerr/txerr support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• [PATCH 2/2] can/peak_usb/pcan_usb: add support of rxerr/txerr counters
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 1/2] can/peak_usb/pcan_usb: Document the commands sent to the device
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• [PATCH 0/2 v2] can/peak_usb/pcan_usb: add rxerr/txerr support
  • From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: can: tcan4x5x: reset pin is active high
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 1/2] net: m_can: tcan4x5x: add required delay after reset
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v1] can: j1939: j1939_sk_bind(): take priv after lock is held
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] can: j1939: Fix address claim code example
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: tcan4x5x
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: can-utils jacd questions
  • From: Kurt Van Dijck <dev.kurt@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V3 0/6] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 0/2] can: m_can_platform: Bug fix of kernel panic for
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH 0/2] can: m_can_platform: Bug fix of kernel panic for
  • From: "pankj.sharma" <pankj.sharma@xxxxxxxxxxx>
• Re: [PATCH 0/2] can: m_can_platform: Bug fix of kernel panic for
  • From: Dan Murphy <dmurphy@xxxxxx>
• can-utils jacd questions
  • From: Elenita Hinds <ecathinds@xxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: Add myself as a maintainer for TCAN4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/2] MAINTAINERS: Add myself as a maintainer for MMIO m_can
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH] MAINTAINERS: add myself as maintainer of MCAN MMIO device driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 2/2] net: m_can: Make wake-up gpio an optional
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/2] dt-bindings: tcan4x5x: Make wake-gpio an optional gpio
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH V3 6/6] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 5/6] can: flexcan: propagate error value of flexcan_chip_stop()
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 4/6] can: flexcan: change the way of stop mode acknowledgment
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 3/6] can: flexcan: add low power enter/exit acknowledgment helper
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 2/6] can: flexcan: Ack wakeup interrupt separately
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 1/6] can: flexcan: fix deadlock when using self wakeup
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V3 0/6] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH V2] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• RE: [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 3/4] can: flexcan: change the way of stop mode acknowledgment
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: pull-request: can 2019-12-03
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH V2 3/4] can: flexcan: change the way of stop mode acknowledgment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH V2] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• Re: [PATCH 3/6] can: slcan: Fix use-after-free Read in slcan_open
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] can: slcan: Fix use-after-free Read in slcan_open
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: xilinx_can: Fix missing Rx can packets on CANFD2.0
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• pull-request: can 2019-12-03
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/6] can: slcan: Fix use-after-free Read in slcan_open
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/6] can: ucan: fix non-atomic allocation in completion handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/6] can: xilinx_can: skip error message on deferred probe
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/6] can: xilinx_can: Fix usage of skb memory
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/6] MAINTAINERS: add fragment for xilinx CAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/6] MAINTAINERS: add myself as maintainer of MCAN MMIO device driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: KMSAN: uninit-value in can_receive
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: KMSAN: uninit-value in can_receive
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• RE: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH] MAINTAINERS: Add fragment for xilinx CAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: KMSAN: uninit-value in can_receive
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: ucan: fix non-atomic allocation in completion handler
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add myself as maintainer of MCAN MMIO device driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] slcan: Fix use-after-free Read in slcan_open
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in slcan_open
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• [PATCH] MAINTAINERS: add myself as maintainer of MCAN MMIO device driver
  • From: Sriram Dash <sriram.dash@xxxxxxxxxxx>
• Re: [PATCH] slcan: Fix use-after-free Read in slcan_open
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in slcan_open
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• KASAN: use-after-free Read in slcan_open
  • From: syzbot <syzbot+b5ec6fd05ab552a78532@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH V2 2/2] can: xilinx_can: Fix usage of skb memory
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH V2 1/2] can: xilinx_can: skip error message on deferred probe
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• [PATCH V2 0/2] can: xilinx_can: Bug fixes on can driver
  • From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
• Re: [PATCH 0/2] can: m_can_platform: Bug fix of kernel panic for
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: general protection fault in j1939_jsk_del (2)
  • From: syzbot <syzbot+99e9e1b200a1e363237d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• general protection fault in j1939_jsk_del (2)
  • From: syzbot <syzbot+99e9e1b200a1e363237d@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] can: ucan: fix non-atomic allocation in completion handler
  • From: Johan Hovold <johan@xxxxxxxxxx>
• RE: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V2 3/4] can: flexcan: change the way of stop mode acknowledgment
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• RE: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH] slcan: Fix use-after-free Read in slcan_open
  • From: jouni.hogander@xxxxxxxxxx
• Re: [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH V2 4/4] can: flexcan: add LPSR mode support
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V2 3/4] can: flexcan: change the way of stop mode acknowledgment
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V2 2/4] can: flexcan: try to exit stop mode during probe stage
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V2 1/4] can: flexcan: fix deadlock when using self wakeup
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• [PATCH V2 0/4] can: flexcan: fixes for stop mode
  • From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: Devicetree for can tcan4x5x
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: KMSAN: uninit-value in can_receive
  • From: syzbot <syzbot+b02ff0707a97e4e79ebb@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Devicetree for can tcan4x5x
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• RE: [PATCH 0/2] can: m_can_platform: Bug fix of kernel panic for
  • From: "Sriram Dash" <sriram.dash@xxxxxxxxxxx>
• RE: [PATCH 1/2] can: xilinx_can: skip error message on deferred probe
  • From: Appana Durga Kedareswara Rao <appanad@xxxxxxxxxx>
• [mkl-can-next:mcp25xxfd 5/8] drivers/net//can/spi/mcp25xxfd/mcp25xxfd-core.c:15:0: warning: "DEBUG" redefined
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 18/25] slcan: Fix memory leak in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 15/21] slcan: Fix memory leak in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 10/13] slcan: Fix memory leak in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 7/9] slcan: Fix memory leak in error path
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: pull-request: can 2019-11-22
  • From: David Miller <davem@xxxxxxxxxxxxx>