Hello Andrejus, thanks for testing. Can I have your Tested-by: Andrejus Falčikas <andrejus.f@xxxxxxxxxxxx> ? Wolfgang Am 09.04.20 um 12:37 schrieb Andrejus Falčikas: > Hello, > > Thank you Mr. Wolfgang Grandegger for the patch. I checked and the > problem disappeared, any warnings do not appear in dmesg after the > "interface down". > > Best regards, > Andrejus F. > > On Thu, Apr 9, 2020 at 1:25 PM Wolfgang Grandegger <wg@xxxxxxxxxxxxxx> wrote: >> >> >> Am 09.04.20 um 08:46 schrieb Andrejus Falčikas: >>> Hello, >>> >>> this Ticket #00560 is closed. >> >> Which does not mean that the problem is gone ;) >> >> Wolfgang >> >>> On Fri, Apr 3, 2020 at 4:53 PM Michal Sojka <michal.sojka@xxxxxxx> wrote: >>>> >>>> Hello Wolfgang, >>>> >>>> On Fri, Apr 03 2020, Wolfgang Grandegger wrote: >>>>> Hello Andrejus, >>>>> >>>>> please do not remove the history of this conversation! It's very >>>>> difficult to follow what you are speaking about... >>>>> >>>>> Am 03.04.20 um 15:04 schrieb Andrejus Falčikas: >>>>>> Hello Mr. Oliver Hartkopp, >>>>>> >>>>>> I would like to notify you that the case described as the issue is >>>>>> caused by non-standard use of the device and protocol. >>>> >>>> [...] >>>> >>>>> >>>>> I observe a similar problem with the GS_USB CAN controller and I have >>>>> posted a patch recently here: >>>>> >>>>> https://marc.info/?l=linux-can&m=158504888512764&w=2 >>>>> >>>>> Could you please give the patch for your device below a try: >>>> >>>> It would be great if Andrejus can try the patch. If not, I'll try it >>>> after I get back to work where I have the device. Unfortunately, due to >>>> current situation, I'm not sure when it will happen. >>>> >>>> Thanks. >>>> -Michal >>> >>> > >
