Linux CAN Development - Date Index

• Thread Index

• Re: [PATCH 1/1] Termination resistor documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/1 v2] Termination resistor documentation
  • From: "Daniel S. Trevitz" <dan@xxxxxxxxxx>
• Re: [PATCH 1/1] Termination resistor documentation
  • From: "Daniel S. Trevitz" <dan@xxxxxxxxxx>
• Re: [PATCH] can: kvaser_usb: Remove -Warray-bounds exception
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: gs_make_candev(): set netdev->dev_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: gs_usb: gs_make_candev(): set netdev->dev_id
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH iproute2-next 5.16 v6 3/5] iplink_can: use PRINT_ANY to factorize code and fix signedness
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Termination resistor documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/1] Termination resistor documentation
  • From: "Daniel S. Trevitz" <dan@xxxxxxxxxx>
• [PATCH] can: kvaser_usb: Remove -Warray-bounds exception
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 6/6] can: gs_usb: support reading error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] can: gs_usb: add ability to enable / disable berr rerporting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] can: gs_usb: new features: GS_CAN_FEATURE_GET_STATE, GS_CAN_FEATURE_BERR_REPORTING
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/6] can: gs_usb: document GS_CAN_FEATURE_GET_STATE
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/6] can: gs_usb: new features: GS_CAN_FEATURE_GET_STATE, GS_CAN_FEATURE_BERR_REPORTING
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/6] can: gs_usb: gs_can_open(): sort checks for ctrlmode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/6] can: gs_usb: add ability to enable / disable berr rerporting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/6] can: gs_usb: gs_can_open(): allow loopback and listen only at the same time
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/6] can: gs_usb: gs_can_open(): merge setting of timestamp flags and init
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 6/6] can: gs_usb: support reading error counters
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] can: esd: add support for esd GmbH PCIe/402 CAN interface family
  • From: Stefan Mätje <Stefan.Maetje@xxxxxx>
• Re: [RESEND PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: j1939: j1939_session_tx_eoma(): fix debug info
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: j1939: j1939_session_tx_eoma(): fix debug info
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH net-next] can: j1939: j1939_session_tx_eoma(): fix debug info
  • From: Zhang Changzhong <zhangchangzhong@xxxxxxxxxx>
• Re: [RFC PATCH v4 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [RESEND PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH net] can: c_can: don't cache TX messages for C_CAN cores
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH net] can: c_can: don't cache TX messages for C_CAN cores
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/1] pull-request: can 2022-09-28
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: c_can: don't cache TX messages for C_CAN cores
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Dave Taht <dave.taht@xxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Eric Dumazet <edumazet@xxxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: "Jason A. Donenfeld" <Jason@xxxxxxxxx>
• Re: [PATCH net-next] net: drop the weight argument from netif_napi_add
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH][next] can: ucan: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: gs_usb: mention candleLight as supported device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH][next] can: ucan: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH][next] can: ucan: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH 5/5] can: bittiming: can_calc_bittiming(): use Phase Seg2 / 2 as default for SJW
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [RFC PATCH v4 5/5] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v4 0/5] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• [RFC can-next] can: remove obsolete PCH CAN driver
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: dariobin@xxxxxxxxx
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: dariobin@xxxxxxxxx
• Re: [PATCH net-next 01/11] can: bcm: registration process optimization in bcm_module_init()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH RFC] can: c_can: don't cache TX messages for C_CAN cores
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [PATCH RFC] can: c_can: wake TX queue after kicking TX of cached CAN frames
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [PATCH v2 0/2] can: bcm: can: bcm: random optimizations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] can: ctucanfd: Remove redundant dev_err call
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: gs_usb: remove dma allocations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: gs_usb: remove dma allocations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/11] can: gs_usb: gs_make_candev(): clean up error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/11] can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/11] can: bcm: registration process optimization in bcm_module_init()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/11] can: gs_usb: gs_can_open(): initialize time counter before starting device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/11] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/11] can: gs_usb: remove dma allocations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/11] can: ctucanfd: Remove redundant dev_err call
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/11] can: gs_usb: add missing lock to protect struct timecounter::cycle_last
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/11] can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/11] pull-request: can-next 2022-09-23
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/11] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/11] can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH RFC] can: c_can: don't cache TX messages for C_CAN cores
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH RFC] can: c_can: wake TX queue after kicking TX of cached CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next] can: ctucanfd: Remove redundant dev_err call
  • From: Shang XiaoJing <shangxiaojing@xxxxxxxxxx>
• Re: [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Matthieu Baerts <matthieu.baerts@xxxxxxxxxxxx>
• [PATCH v2] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: (No Subject)
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Matthieu Baerts <matthieu.baerts@xxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: dariobin@xxxxxxxxx
• Re: (No Subject)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/3] can: gs_usb: various cleanups
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/3] can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/3] can: gs_usb: gs_make_candev(): clean up error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 1/3] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH net 1/3] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/3] pull-request: can 2022-09-21
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/3] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• [PATCH v2] can: gs_usb: gs_can_open(): initialize time counter before starting device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: gs_usb: gs_can_open(): initialize time counter before starting device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: dariobin@xxxxxxxxx
• Re: [PATCH 3/3] can: gs_usb: gs_can_open(): initialize time counter before starting device
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: (No Subject)
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: gs_usb: gs_can_open(): fix race dev->can.state condition
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 00/15] can: kvaser_usb: Various fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 0/17] pull-request: can 2022-09-20
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 0/17] pull-request: can 2022-09-20
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 0/1] can: gs_usb: remove dma allocations
  • From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
• [PATCH 0/1] can: gs_usb: remove dma allocations
  • From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
• [PATCH v2] can: gs_usb: remove dma allocations
  • From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
• RE: [PATCH v2 3/3] can: gs_usb: add switchable termination support
  • From: "Trevitz, Daniel" <Daniel.Trevitz@xxxxxxxx>
• [PATCH 3/3] can: gs_usb: gs_can_open(): initialize time counter before starting device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/3] can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/3] can: gs_usb: add missing lock to protect struct timecounter::cycle_last
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [no subject]
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 14/17] can: kvaser_usb_leaf: Ignore stale bus-off after start
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 10/17] can: kvaser_usb_leaf: Fix TX queue out of sync after restart
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 12/17] can: kvaser_usb_leaf: Fix improved state not being reported
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 09/17] can: kvaser_usb_leaf: Set Warning state even without bus errors
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 16/17] can: kvaser_usb: Add struct kvaser_usb_busparams
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 15/17] can: kvaser_usb_leaf: Fix bogus restart events
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 17/17] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 08/17] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 07/17] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 05/17] can: kvaser_usb: Fix possible completions during init_completion
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 06/17] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 13/17] can: kvaser_usb_leaf: Fix wrong CAN state after stopping
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 11/17] can: kvaser_usb_leaf: Fix CAN state after restart
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 03/17] can: kvaser_usb_leaf: Fix overread with an invalid command
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 01/17] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 02/17] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/17] pull-request: can 2022-09-20
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 04/17] can: kvaser_usb: Fix use of uninitialized completion
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• RE: [PATCH v2 3/3] can: gs_usb: add switchable termination support
  • From: "Trevitz, Daniel" <Daniel.Trevitz@xxxxxxxx>
• Re: [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] can: gs_usb: cleanups and termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• RE: [PATCH v2 0/3] can: gs_usb: cleanups and termination support
  • From: "Trevitz, Daniel" <Daniel.Trevitz@xxxxxxxx>
• Re: [PATCH 1/1] can: gs_usb: remove dma allocations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] can: gs_usb: gs_make_candev(): convert from usb_control_msg() to usb_control_msg_recv()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] can: gs_usb: cleanups and termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] can: gs_usb: gs_make_candev(): clean up error handling
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: gs_usb: add switchable termination support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH net-next 01/23] can: rx-offload: can_rx_offload_init_queue(): fix typo
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH -next] can: flexcan: Switch to use dev_err_probe() helper
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v4 1/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• [RESEND PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH v9 0/7] can: support CAN XL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/23] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/23] can: skb: unify skb CAN frame identification helpers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/23] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 23/23] can: raw: add CAN XL support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/23] can: dev: add CAN XL support to virtual CAN
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/23] can: skb: add skb CAN frame data length helpers
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 16/23] can: flexcan: Switch to use dev_err_probe() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/23] can: raw: use guard clause to optimize nesting in raw_rcv()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/23] can: canxl: introduce CAN XL data structure
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/23] dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/23] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/23] can: raw: process optimization in raw_init()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/23] docs: networking: device drivers: flexcan: fix invalid email
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/23] can: gs_usb: add RX and TX hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/23] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/23] can: gs_usb: use common spelling of GS_USB in macros
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/23] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/23] can: kvaser_pciefd: remove redundant variable ret
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/23] can: sja1000: remove redundant variable ret
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/23] can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/23] can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/23] pull-request: can-next 2022-09-15
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/23] can: rx-offload: can_rx_offload_init_queue(): fix typo
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/23] can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_*
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] can: bcm: can: bcm: random optimizations
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v9 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2 2/2] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH v2 0/2] can: bcm: can: bcm: random optimizations
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH v2 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH v4 0/3] can: ctucanfd: hardware rx timestamps reporting
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v4 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v4 3/3] doc: ctucanfd: RX frames timestamping for platform devices
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v3 0/3] can: ctucanfd: hardware rx timestamps reporting
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v3 2/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v3 3/3] doc: ctucanfd: RX frames timestamping for platform devices
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH -next] can: flexcan: Switch to use dev_err_probe() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH -next] can: flexcan: Switch to use dev_err_probe() helper
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• [PATCH 0/1] can: gs_usb: remove dma allocations
  • From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
• [PATCH 1/1] can: gs_usb: remove dma allocations
  • From: Rhett Aultman <rhett.aultman@xxxxxxxxxxx>
• Re: [PATCH v8 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 7/7] can: raw: add CAN XL support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 6/7] can: dev: add CAN XL support to virtual CAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 2/7] can: skb: add skb CAN frame data length helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v9 1/7] can: skb: unify skb CAN frame identification helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 2/2] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] can: bittiming: can_calc_bittiming(): make use of min3()
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• RE: [PATCH 2/5] can: bittiming: can_calc_bittiming(): make use of min3()
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• [syzbot] WARNING in j1939_tp_rxtimer (2)
  • From: syzbot <syzbot+34dcf6bbda0e05f6b3ed@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v8 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v8 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 2/5] can: bittiming: can_calc_bittiming(): make use of min3()
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 0/7] can: support CAN XL
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v8 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 5/5] can: bittiming: can_calc_bittiming(): use Phase Seg2 / 2 as default for SJW
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH 5/5] can: bittiming: can_calc_bittiming(): use Phase Seg2 / 2 as default for SJW
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 2/2] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: "Ziyang Xuan (William)" <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH 2/2] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH 2/2] can: bcm: check the result of can_send() in bcm_can_tx()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH 0/2] can: bcm: random optimizations
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH 1/2] can: bcm: registration process optimization in bcm_module_init()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• RE: [PATCH 5/5] can: bittiming: can_calc_bittiming(): use Phase Seg2 / 2 as default for SJW
  • From: <Thomas.Kopp@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: john@xxxxxxxxxxxxxxxxxxxx
• [PATCH 3/5] can: bittiming: can_calc_bittiming(): clean up SJW sanitizing
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/5] can: bittiming: can_calc_bittiming(): make use of min3()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/5] can: bittiming: improve SJW handling and default
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 5/5] can: bittiming: can_calc_bittiming(): use Phase Seg2 / 2 as default for SJW
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 4/5] can: bittiming: can_calc_bittiming(): ensure that SJW is not longer than either Phase Buffer Segment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/5] can: dev: register_candev(): ensure that bittiming const are valid
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: [RFC PATCH v3 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 0/2] can: raw: random optimizations
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH][next] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add RZ/N1 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH v3 0/3] Add RZ/N1 CAN support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-next] can: sja1000: remove redundant variable ret
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH linux-next] can: kvaser_pciefd: remove redundant variable ret
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add RZ/N1 CAN support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 13/15] can: kvaser_usb_leaf: Fix bogus restart events
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 09/15] can: kvaser_usb_leaf: Fix CAN state after restart
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 10/15] can: kvaser_usb_leaf: Fix improved state not being reported
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 03/15] can: kvaser_usb: Fix possible completions during init_completion
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 02/15] can: kvaser_usb: Fix use of uninitialized completion
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v4 00/15] can: kvaser_usb: Various fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• Re: [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 00/15] can: kvaser_usb: Various fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 03/15] can: kvaser_usb: Fix possible completions during init_completion
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 10/15] can: kvaser_usb_leaf: Fix improved state not being reported
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 09/15] can: kvaser_usb_leaf: Fix CAN state after restart
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 13/15] can: kvaser_usb_leaf: Fix bogus restart events
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 02/15] can: kvaser_usb: Fix use of uninitialized completion
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• [PATCH v3 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [RFC PATCH v3 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] net: move from strlcpy with unused retval to strscpy
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH linux-next] can: sja1000: remove redundant variable ret
  • From: cgel.zte@xxxxxxxxx
• [PATCH linux-next] can: kvaser_pciefd: remove redundant variable ret
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH v8 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• AW: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: "Fink, Peter" <pfink@xxxxxxxxxxxx>
• [PATCH v2 1/3] net: move from strlcpy with unused retval to strscpy
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: [PATCH][next] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH][next] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH][next] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: john@xxxxxxxxxxxxxxxxxxxx
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• [RFC PATCH v3 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 0/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] can: gs_usb: add RX and TX hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] can: gs_usb: use common spelling of GS_USB in macros
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] can: gs_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH net-next 0/2] can: raw: random optimizations
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH net-next 1/2] can: raw: process optimization in raw_init()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• [PATCH net-next 2/2] can: raw: use guard clause to optimize nesting in raw_rcv()
  • From: Ziyang Xuan <william.xuanziyang@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [RFC PATCH v2 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH 2/2] can: gs_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] can: gs_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• [PATCH 0/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 1/2] can: gs_usb: hardware timestamp support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 2/2] can: gs_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [virtio-dev] [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [RFC PATCH 1/1] can: virtio: Initial virtio CAN driver.
  • From: Harald Mommer <harald.mommer@xxxxxxxxxxxxxxx>
• [RFC PATCH v2 1/1] virtio-can: Device specification - 2nd RFC draft.
  • From: Harald Mommer <harald.mommer@xxxxxxxxxxxxxxx>
• CM-ITC, pch_can/c_can_pci, sendto() returning ENOBUFS
  • From: Jacob Kroon <jacob.kroon@xxxxxxxxx>
• RE: [PATCH v4 2/6] dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• vacation - no reviews in cw34/35
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH v2 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 0/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v4 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v4 6/6] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] net: move from strlcpy with unused retval to strscpy
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v2 00/15] can: kvaser_usb: Various fixes
  • From: Jimmy Assarsson <extja@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [RFC PATCH 0/4] can: bxcan: add support for ST bxCAN controller
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH 4/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/4] dt-bindings: net: can: add STM32 bxcan DT bindings
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/4] can: bxcan: add support for ST bxCAN controller
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/15] can: kvaser_usb: Various fixes
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.9 08/12] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: PCAN and SocketCAN Questions
  • From: David Boles <me@xxxxxxxxxxx>
• Re: PCAN and SocketCAN Questions
  • From: David Boles <me@xxxxxxxxxxx>
• Re: [PATCH v2 00/15] can: kvaser_usb: Various fixes
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• Re: [PATCH v2 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
  • From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: PCAN and SocketCAN Questions
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: PCAN and SocketCAN Questions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH can v2] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: Thorsten Scherer <t.scherer@xxxxxxxxxxxx>
• Re: [PATCH v8 3/7] can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH can v2] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: PCAN and SocketCAN Questions
  • From: David Boles <me@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/14] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 08/12] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 19/25] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/14] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 36/46] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 55/69] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.18 71/93] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.19 079/105] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] can: rx-offload: Break loop on queue full
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can v2] can: flexcan: flexcan_mailbox_read() fix return value for drop = true
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next 2/2] can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_*
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next 1/2] can: rx-offload: can_rx_offload_init_queue(): fix typo
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH can-next 0/2] fix typos
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: rx-offload: Break loop on queue full
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v8 3/7] can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: rx-offload: Break loop on queue full
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Raspberry PI running 5.10.x Kernel and issues with Daul channel Waveshare based 2.1 MCP251xFD CAN HAT
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Raspberry PI running 5.10.x Kernel and issues with Daul channel Waveshare based 2.1 MCP251xFD CAN HAT
  • From: Mark Bath <mark@xxxxxxxxxxxxxxxxxx>
• Re: Raspberry PI running 5.10.x Kernel and issues with Daul channel Waveshare based 2.1 MCP251xFD CAN HAT
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Raspberry PI running 5.10.x Kernel and issues with Daul channel Waveshare based 2.1 MCP251xFD CAN HAT
  • From: Mark Bath <mark@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH net 1/4] can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: PCAN and SocketCAN Questions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/4] pull-request: can 2022-08-10
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net 4/4] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/4] can: j1939: j1939_session_destroy(): fix memory leak of skbs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/4] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/4] can: ems_usb: fix clang's -Wunaligned-access warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 0/n] pull-request: can 2022-08-10
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/4] can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• PCAN and SocketCAN Questions
  • From: David Boles <me@xxxxxxxxxxx>
• Re: [PATCH net 4/4] can: mcp251x: Fix race condition on receive interrupt
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: Debugging dropped/missing frames in the network layer
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Debugging dropped/missing frames in the network layer
  • From: Magnus Aagaard Sørensen <mas@xxxxxxxxxxxxxxxxxx>
• [PATCH net 0/4] pull-request: can 2022-08-09
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 4/4] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 2/4] can: j1939: j1939_session_destroy(): fix memory leak of skbs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 3/4] can: ems_usb: fix clang's -Wunaligned-access warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net 1/4] can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] can: j1939: Replace WARN_ON_ONCE with netdev_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element
  • From: Kenneth Lee <klee33@xxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] can: j1939: fix memory leak of skbs
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH v4] can: mcp251x: Fix race condition on receive interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4] can: mcp251x: Fix race condition on receive interrupt
  • From: Sebastian Würl <sebastian.wuerl@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• [PATCH v3] can: mcp251x: Fix race condition on receive interrupt
  • From: Sebastian Würl <sebastian.wuerl@xxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: Fix race condition on receive interrupt
  • From: Sebastian Würl <sebastian.wuerl@xxxxxxxxxxxxx>
• Re: [PATCH] can: mcp251x: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: mcp251x: Fix race condition on receive interrupt
  • From: Sebastian Würl <sebastian.wuerl@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] drivers: usb/core/urb: Add URB_FREE_COHERENT
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt
  • From: Sebastian Würl <sebastian.wuerl@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH 0/4] can-round-trip-stats
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: ems_usb: fix clang's -Wunaligned-access warning
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] can: ctucanfd: hardware rx timestamps reporting
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] doc: ctucanfd: RX frames timestamping for platform devices
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx>
• [PATCH v8 1/7] can: skb: unify skb CAN frame identification helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 7/7] can: raw: add CAN XL support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 2/7] can: skb: add skb CAN frame data length helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 6/7] can: dev: add CAN XL support to virtual CAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v8 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2 1/3] can: ctucanfd: add HW timestamps to RX and error CAN frames
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v2 0/3] can: ctucanfd: hardware rx timestamps reporting
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: can: ctucanfd: add another clock for HW timestamping
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• [PATCH v2 3/3] doc: ctucanfd: RX frames timestamping for platform devices
  • From: Matej Vasilevski <matej.vasilevski@xxxxxxxxx>
• Re: [PATCH v3 1/2] drivers: usb/core/urb: Add URB_FREE_COHERENT
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 1/2] drivers: usb/core/urb: Add URB_FREE_COHERENT
  • From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH net-next 01/36] can: mcp251xfd: mcp251xfd_dump(): fix comment
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v1] can: peak_usb: export PCAN device ID as sysfs device attribute
  • From: Lukas Magel <lukas.magel@xxxxxxxxxx>
• [PATCH net-next 34/36] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 35/36] can: etas_es58x: remove useless calls to usb_fill_bulk_urb()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 36/36] can: can327: fix a broken link to Documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 32/36] can: kvaser_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 33/36] can: peak_canfd: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 28/36] can: dev: add generic function can_eth_ioctl_hwts()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 25/36] can: tree-wide: advertise software timestamping capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 31/36] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 30/36] can: etas_es58x: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 29/36] can: mcp251xfd: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 26/36] can: dev: add hardware TX timestamp
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 27/36] can: dev: add generic function can_ethtool_op_get_ts_info_hwts()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 24/36] can: v(x)can: add software tx timestamps
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 23/36] can: slcan: add software tx timestamps
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 22/36] can: janz-ican3: add software tx timestamp
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 20/36] MAINTAINERS: Add maintainer for the slcan driver
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 21/36] can: can327: add software tx timestamps
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 19/36] can: slcan: add support for listen-only mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 16/36] can: slcan: remove legacy infrastructure
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 18/36] can: slcan: use the generic can_change_mtu()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 17/36] can: slcan: change every `slc' occurrence in `slcan'
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 15/36] can: slcan: remove useless header inclusions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 14/36] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 13/36] can: flexcan: export flexcan_ethtool_ops and remove flexcan_set_ethtool_ops()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 11/36] can: slcan: export slcan_ethtool_ops and remove slcan_set_ethtool_ops()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 12/36] can: c_can: export c_can_ethtool_ops and remove c_can_set_ethtool_ops()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 09/36] can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 08/36] can: ubs_8dev: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 10/36] can: etas_es58x: remove DRV_VERSION
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 06/36] can: gs_ubs: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 05/36] can: esd_usb: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 07/36] can: kvaser_usb: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 04/36] can: softing: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 02/36] can: can327: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 03/36] can: ems_usb: use KBUILD_MODNAME instead of hard coded names
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 01/36] can: mcp251xfd: mcp251xfd_dump(): fix comment
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH net-next 0/36] pull-request: can-next 2022-07-31
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: can327: Fix a broken link to Documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] can: can327: Fix a broken link to Documentation
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: can327: Fix a broken link to Documentation
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH] can: can327: Fix a broken link to Documentation
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Vincent Mailhol <vincent.mailhol@xxxxxxxxx>
• [PATCH v7 7/7] can: raw: add CAN XL support
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 4/7] can: canxl: introduce CAN XL data structure
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 1/7] can: skb: unify skb CAN frame identification helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 6/7] can: dev: add CAN XL support to virtual CAN
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 0/7] can: support CAN XL
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v7 2/7] can: skb: add skb CAN frame data length helpers
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• [PATCH v2] can: j1939: Replace WARN_ON_ONCE with netdev_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH v2] can: j1939: Replace WARN_ON_ONCE with netdev_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] can: j1939: Replace WARN_ON_ONCE with netdev_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH] can: etas_es58x: remove useless calls to usb_fill_bulk_urb()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] can: etas_es58x: remove useless calls to usb_fill_bulk_urb()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: fix memory leak of skbs
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] can: j1939: Replace WARN_ON_ONCE with pr_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] can: j1939: Replace WARN_ON_ONCE with pr_warn_once() in j1939_sk_queue_activate_next_locked()
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH] can: j1939: Remove unnecessary WARN_ON_ONCE in j1939_sk_queue_activate_next_locked()
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH v4 05/14] can: tree-wide: advertise software timestamping capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 05/14] can: tree-wide: advertise software timestamping capabilities
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v6 3/7] can: set CANFD_FDF flag in all CAN FD frame structures
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/14] can: add ethtool support and reporting of timestamping capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 05/14] can: tree-wide: advertise software timestamping capabilities
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] can: slcan: extend supported features (step 2)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v4 5/7] can: slcan: use the generic can_change_mtu()
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 7/7] MAINTAINERS: Add maintainer for the slcan driver
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/7] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/7] can: slcan: remove legacy infrastructure
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 6/7] can: slcan: add support for listen-only mode
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/7] can: slcan: change every `slc' occurrence in `slcan'
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/7] can: slcan: remove useless header inclusions
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/7] can: slcan: extend supported features (step 2)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v4 01/14] can: can327: add software tx timestamps
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH v6 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
• Re: [RFC PATCH v3 0/9] can: slcan: extend supported features (step 2)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 3/9] can: slcan: remove legacy infrastructure
  • From: Max Staudt <max@xxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v6 5/7] can: canxl: update CAN infrastructure for CAN XL frames
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 10/24] can: tree-wide: implement ethtool_ops::get_drvinfo()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] can: export export slcan_ethtool_ops and remove setter functions
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 3/3] can: flexcan: export flexcan_ethtool_ops and remove flexcan_set_ethtool_ops()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH 2/3] can: c_can: export c_can_ethtool_ops and remove c_can_set_ethtool_ops()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH 1/3] can: slcan: export slcan_ethtool_ops and remove slcan_set_ethtool_ops()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH 0/3] can: export export slcan_ethtool_ops and remove setter functions
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 13/14] can: peak_canfd: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 12/14] can: kvaser_usb: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 11/14] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 10/14] can: etas_es58x: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 09/14] can: mcp251xfd: advertise timestamping capabilities and add ioctl support
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 08/14] can: dev: add generic function can_eth_ioctl_hwts()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 07/14] can: dev: add generic function can_ethtool_op_get_ts_info_hwts()
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 06/14] can: dev: add hardware TX timestamp
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 05/14] can: tree-wide: advertise software timestamping capabilities
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 04/14] can: v(x)can: add software tx timestamps
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 03/14] can: slcan: add software tx timestamps
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 01/14] can: can327: add software tx timestamps
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 02/14] can: janz-ican3: add software tx timestamp
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• [PATCH v4 00/14] can: add ethtool support and reporting of timestamping capabilities
  • From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 10/24] can: tree-wide: implement ethtool_ops::get_drvinfo()
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v3 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Vincent MAILHOL <mailhol.vincent@xxxxxxxxxx>
• Re: [PATCH v1 10/24] can: tree-wide: implement ethtool_ops::get_drvinfo()
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH v3 6/9] can: slcan: add support for listen-only mode
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 7/9] ethtool: add support to get/set CAN bit time register
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr)
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 3/9] can: slcan: remove legacy infrastructure
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v3 5/9] can: slcan: use the generic can_change_mtu()
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>