Add mram-ecc-cfg property which indicates the error correction code config and enable the same for FSD platform. In FSD, error correction code (ECC) is configured via PERIC SYSREG registers. Signed-off-by: Vivek Yadav <vivek.2311@xxxxxxxxxxx> --- arch/arm64/boot/dts/tesla/fsd.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index 154fd3fc5895..03d46a113612 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -778,6 +778,7 @@ clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>, <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>; clock-names = "hclk", "cclk"; + mram-ecc-cfg = <&sysreg_peric 0x700>; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; @@ -795,6 +796,7 @@ clocks = <&clock_peric PERIC_MCAN1_IPCLKPORT_PCLK>, <&clock_peric PERIC_MCAN1_IPCLKPORT_CCLK>; clock-names = "hclk", "cclk"; + mram-ecc-cfg = <&sysreg_peric 0x704>; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; @@ -812,6 +814,7 @@ clocks = <&clock_peric PERIC_MCAN2_IPCLKPORT_PCLK>, <&clock_peric PERIC_MCAN2_IPCLKPORT_CCLK>; clock-names = "hclk", "cclk"; + mram-ecc-cfg = <&sysreg_peric 0x708>; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; @@ -829,6 +832,7 @@ clocks = <&clock_peric PERIC_MCAN3_IPCLKPORT_PCLK>, <&clock_peric PERIC_MCAN3_IPCLKPORT_CCLK>; clock-names = "hclk", "cclk"; + mram-ecc-cfg = <&sysreg_peric 0x70c>; bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; -- 2.17.1
