Linux CAN Development
[Prev Page][Next Page]
- Re: [PATCH] net: move from strlcpy with unused retval to strscpy, Marc Kleine-Budde
- [PATCH] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported, Marc Kleine-Budde
- [RFC PATCH 0/4] can: bxcan: add support for ST bxCAN controller,
Dario Binacchi
- [PATCH AUTOSEL 4.14 10/14] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 4.9 08/12] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller,
Sasha Levin
- [PATCH AUTOSEL 5.4 19/25] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 4.19 10/14] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 5.10 36/46] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 5.15 55/69] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 5.18 71/93] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH AUTOSEL 5.19 079/105] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Sasha Levin
- [PATCH can v2] can: flexcan: flexcan_mailbox_read() fix return value for drop = true,
Marc Kleine-Budde
- [PATCH can-next 0/2] fix typos,
Marc Kleine-Budde
- [PATCH] can: rx-offload: Break loop on queue full,
Uwe Kleine-König
- Raspberry PI running 5.10.x Kernel and issues with Daul channel Waveshare based 2.1 MCP251xFD CAN HAT,
Mark Bath
[PATCH net 0/4] pull-request: can 2022-08-10, Marc Kleine-Budde
[PATCH net 0/n] pull-request: can 2022-08-10,
Marc Kleine-Budde
PCAN and SocketCAN Questions,
David Boles
Debugging dropped/missing frames in the network layer,
Magnus Aagaard Sørensen
[PATCH net 0/4] pull-request: can 2022-08-09,
Marc Kleine-Budde
[PATCH] can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER,
Christophe JAILLET
[PATCH] can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element,
Kenneth Lee
[PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt,
Sebastian Würl
[PATCH] can: ems_usb: fix clang's -Wunaligned-access warning, Marc Kleine-Budde
[PATCH v8 0/7] can: support CAN XL,
Oliver Hartkopp
[PATCH v2 0/3] can: ctucanfd: hardware rx timestamps reporting,
Matej Vasilevski
[PATCH v1] can: peak_usb: export PCAN device ID as sysfs device attribute,
Lukas Magel
- Re: [PATCH v1] can: peak_usb: export PCAN device ID as sysfs device attribute, Vincent MAILHOL
- [RESEND PATCH v2] can: peak_usb: export PCAN device ID as sysfs device attribute, Lukas Magel
- [PATCH 0/7] can: peak_usb: Introduce configurable user dev id, Lukas Magel
- [PATCH v2 0/7] can: peak_usb: Introduce configurable user dev id, Lukas Magel
- [PATCH v3 0/7] can: peak_usb: Introduce configurable CAN channel ID, Lukas Magel
- [PATCH v3 1/8] can: peak_usb: rename device_id to CAN channel ID, Lukas Magel
- [PATCH v3 2/8] can: peak_usb: add callback to read CAN channel ID of PEAK CAN-FD devices, Lukas Magel
- [PATCH v3 3/8] can: peak_usb: allow flashing of the CAN channel ID, Lukas Magel
- [PATCH v3 4/8] can: peak_usb: replace unregister_netdev() with unregister_candev(), Lukas Magel
- [PATCH v3 5/8] can: peak_usb: add ethtool interface to user-configurable CAN channel identifier, Lukas Magel
- [PATCH v3 6/8] can: peak_usb: export PCAN CAN channel ID as sysfs device attribute, Lukas Magel
- [PATCH v3 7/8] can: peak_usb: align CAN channel ID format in log with sysfs attribute, Lukas Magel
- [PATCH v3 8/8] can: peak_usb: Reorder include directives alphabetically, Lukas Magel
- [RESEND PATCH v3 0/8] can: peak_usb: Introduce configurable CAN channel ID, Lukas Magel
[PATCH net-next 0/36] pull-request: can-next 2022-07-31,
Marc Kleine-Budde
- [PATCH net-next 01/36] can: mcp251xfd: mcp251xfd_dump(): fix comment, Marc Kleine-Budde
- [PATCH net-next 03/36] can: ems_usb: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 02/36] can: can327: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 04/36] can: softing: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 07/36] can: kvaser_usb: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 05/36] can: esd_usb: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 06/36] can: gs_ubs: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 10/36] can: etas_es58x: remove DRV_VERSION, Marc Kleine-Budde
- [PATCH net-next 08/36] can: ubs_8dev: use KBUILD_MODNAME instead of hard coded names, Marc Kleine-Budde
- [PATCH net-next 09/36] can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME, Marc Kleine-Budde
- [PATCH net-next 12/36] can: c_can: export c_can_ethtool_ops and remove c_can_set_ethtool_ops(), Marc Kleine-Budde
- [PATCH net-next 11/36] can: slcan: export slcan_ethtool_ops and remove slcan_set_ethtool_ops(), Marc Kleine-Budde
- [PATCH net-next 13/36] can: flexcan: export flexcan_ethtool_ops and remove flexcan_set_ethtool_ops(), Marc Kleine-Budde
- [PATCH net-next 14/36] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names, Marc Kleine-Budde
- [PATCH net-next 15/36] can: slcan: remove useless header inclusions, Marc Kleine-Budde
- [PATCH net-next 17/36] can: slcan: change every `slc' occurrence in `slcan', Marc Kleine-Budde
- [PATCH net-next 18/36] can: slcan: use the generic can_change_mtu(), Marc Kleine-Budde
- [PATCH net-next 16/36] can: slcan: remove legacy infrastructure, Marc Kleine-Budde
- [PATCH net-next 19/36] can: slcan: add support for listen-only mode, Marc Kleine-Budde
- [PATCH net-next 21/36] can: can327: add software tx timestamps, Marc Kleine-Budde
- [PATCH net-next 20/36] MAINTAINERS: Add maintainer for the slcan driver, Marc Kleine-Budde
- [PATCH net-next 22/36] can: janz-ican3: add software tx timestamp, Marc Kleine-Budde
- [PATCH net-next 23/36] can: slcan: add software tx timestamps, Marc Kleine-Budde
- [PATCH net-next 24/36] can: v(x)can: add software tx timestamps, Marc Kleine-Budde
- [PATCH net-next 27/36] can: dev: add generic function can_ethtool_op_get_ts_info_hwts(), Marc Kleine-Budde
- [PATCH net-next 26/36] can: dev: add hardware TX timestamp, Marc Kleine-Budde
- [PATCH net-next 29/36] can: mcp251xfd: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
- [PATCH net-next 30/36] can: etas_es58x: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
- [PATCH net-next 31/36] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
- [PATCH net-next 25/36] can: tree-wide: advertise software timestamping capabilities, Marc Kleine-Budde
- [PATCH net-next 28/36] can: dev: add generic function can_eth_ioctl_hwts(), Marc Kleine-Budde
- [PATCH net-next 33/36] can: peak_canfd: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
- [PATCH net-next 32/36] can: kvaser_usb: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
- [PATCH net-next 36/36] can: can327: fix a broken link to Documentation, Marc Kleine-Budde
- [PATCH net-next 35/36] can: etas_es58x: remove useless calls to usb_fill_bulk_urb(), Marc Kleine-Budde
- [PATCH net-next 34/36] can: peak_usb: advertise timestamping capabilities and add ioctl support, Marc Kleine-Budde
[PATCH] can: can327: Fix a broken link to Documentation,
Christophe JAILLET
[PATCH v7 0/7] can: support CAN XL,
Oliver Hartkopp
[PATCH] can: etas_es58x: remove useless calls to usb_fill_bulk_urb(),
Vincent Mailhol
[PATCH v4 0/7] can: slcan: extend supported features (step 2),
Dario Binacchi
[PATCH 0/3] can: export export slcan_ethtool_ops and remove setter functions,
Vincent Mailhol
[RFC PATCH v3 0/9] can: slcan: extend supported features (step 2),
Dario Binacchi
- [RFC PATCH v3 1/9] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names, Dario Binacchi
- [RFC PATCH v3 2/9] can: slcan: remove useless header inclusions, Dario Binacchi
- [RFC PATCH v3 4/9] can: slcan: change every `slc' occurrence in `slcan', Dario Binacchi
- [RFC PATCH v3 9/9] MAINTAINERS: Add maintainer for the slcan driver, Dario Binacchi
- [RFC PATCH v3 5/9] can: slcan: use the generic can_change_mtu(), Dario Binacchi
- [RFC PATCH v3 3/9] can: slcan: remove legacy infrastructure, Dario Binacchi
- [RFC PATCH v3 8/9] can: slcan: add support to set bit time register (btr), Dario Binacchi
- [RFC PATCH v3 7/9] ethtool: add support to get/set CAN bit time register, Dario Binacchi
- [RFC PATCH v3 6/9] can: slcan: add support for listen-only mode, Dario Binacchi
- Re: [RFC PATCH v3 0/9] can: slcan: extend supported features (step 2), Marc Kleine-Budde
[PATCH] can: mcp251xfd: mcp251xfd_dump(): fix comment, Marc Kleine-Budde
[PATCH 0/9] can: remove litteral strings used for driver name and remove DRV_VERSION,
Vincent Mailhol
- [PATCH 1/9] can: can327: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH 2/9] can: ems_ubs: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH 3/9] can: slcan: add DRV_NAME and define pr_fmt to replace hardcoded names, Vincent Mailhol
- [PATCH 4/9] can: softing: add DRV_NAME to replace hardcoded names, Vincent Mailhol
- [PATCH 5/9] can: esd_usb: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH 6/9] can: gs_ubs: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH 7/9] can: softing: add DRV_NAME to replace hardcoded names, Vincent Mailhol
- [PATCH 8/9] can: ubs_8dev: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH 9/9] can: etas_es58x: remove DRV_VERSION, Vincent Mailhol
- [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION, Vincent Mailhol
- [PATCH v2 01/10] can: can327: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 02/10] can: ems_usb: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 04/10] can: softing: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 03/10] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names, Vincent Mailhol
- [PATCH v2 05/10] can: esd_usb: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 06/10] can: gs_ubs: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 07/10] can: kvaser_usb: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 08/10] can: ubs_8dev: use KBUILD_MODNAME instead of hard coded names, Vincent Mailhol
- [PATCH v2 09/10] can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME, Vincent Mailhol
- [PATCH v2 10/10] can: etas_es58x: remove DRV_VERSION, Vincent Mailhol
- Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION, Marc Kleine-Budde
- Re: [PATCH v2 00/10] can: remove litteral strings used for driver names and remove DRV_VERSION, andy . shevchenko
[PATCH 0/4] can-round-trip-stats,
Vincent Mailhol
[PATCH v1 00/24] can: add ethtool support and reporting of timestamping capabilities,
Vincent Mailhol
- [PATCH v1 01/24] can: can327: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH v1 02/24] can: ems_ubs: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH v1 03/24] can: slcan: add DRV_NAME and define pr_fmt to replace hardcoded names, Vincent Mailhol
- [PATCH v1 04/24] can: softing: add DRV_NAME to replace hardcoded names, Vincent Mailhol
- [PATCH v1 05/24] can: esd_usb: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH v1 06/24] can: gs_ubs: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH v1 07/24] can: softing: add DRV_NAME to replace hardcoded names, Vincent Mailhol
- [PATCH v1 08/24] can: ubs_8dev: use KBUILD_MODNAME instead of hard coded name, Vincent Mailhol
- [PATCH v1 09/24] can: etas_es58x: remove DRV_VERSION, Vincent Mailhol
- [PATCH v1 10/24] can: tree-wide: implement ethtool_ops::get_drvinfo(), Vincent Mailhol
- [PATCH v1 11/24] can: can327: add software tx timestamps, Vincent Mailhol
- [PATCH v1 12/24] can: janz-ican3: add software tx timestamp, Vincent Mailhol
- [PATCH v1 13/24] can: slcan: add software tx timestamps, Vincent Mailhol
- [PATCH v1 14/24] can: v(x)can: add software tx timestamps, Vincent Mailhol
- [PATCH v1 15/24] can: tree-wide: advertise software timestamping capabilities, Vincent Mailhol
- [PATCH v1 16/24] can: dev: add hardware TX timestamp, Vincent Mailhol
- [PATCH v1 17/24] can: dev: add generic function can_ethtool_op_get_ts_info_hwts(), Vincent Mailhol
- [PATCH v1 19/24] can: mcp251xfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v1 18/24] can: dev: add generic function can_eth_ioctl_hwts(), Vincent Mailhol
- [PATCH v1 20/24] can: etas_es58x: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v1 22/24] can: kvaser_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v1 21/24] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v1 23/24] can: peak_canfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v1 24/24] can: peak_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- Re: [PATCH v1 00/24] can: add ethtool support and reporting of timestamping capabilities, Vincent MAILHOL
- [PATCH v2 00/14] can: add ethtool support and reporting of timestamping capabilities, Vincent Mailhol
- [PATCH v2 01/14] can: can327: add software tx timestamps, Vincent Mailhol
- [PATCH v2 02/14] can: janz-ican3: add software tx timestamp, Vincent Mailhol
- [PATCH v2 03/14] can: slcan: add software tx timestamps, Vincent Mailhol
- [PATCH v2 04/14] can: v(x)can: add software tx timestamps, Vincent Mailhol
- [PATCH v2 05/14] can: tree-wide: advertise software timestamping capabilities, Vincent Mailhol
- [PATCH v2 06/14] can: dev: add hardware TX timestamp, Vincent Mailhol
- [PATCH v2 07/14] can: dev: add generic function can_ethtool_op_get_ts_info_hwts(), Vincent Mailhol
- [PATCH v2 08/14] can: dev: add generic function can_eth_ioctl_hwts(), Vincent Mailhol
- [PATCH v2 09/14] can: mcp251xfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v2 10/14] can: etas_es58x: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v2 11/14] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v2 12/14] can: kvaser_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v2 13/14] can: peak_canfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v2 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 00/14], Vincent Mailhol
- [PATCH v3 01/14] can: can327: add software tx timestamps, Vincent Mailhol
- [PATCH v3 02/14] can: janz-ican3: add software tx timestamp, Vincent Mailhol
- [PATCH v3 03/14] can: slcan: add software tx timestamps, Vincent Mailhol
- [PATCH v3 04/14] can: v(x)can: add software tx timestamps, Vincent Mailhol
- [PATCH v3 05/14] can: tree-wide: advertise software timestamping capabilities, Vincent Mailhol
- [PATCH v3 06/14] can: dev: add hardware TX timestamp, Vincent Mailhol
- [PATCH v3 07/14] can: dev: add generic function can_ethtool_op_get_ts_info_hwts(), Vincent Mailhol
- [PATCH v3 08/14] can: dev: add generic function can_eth_ioctl_hwts(), Vincent Mailhol
- [PATCH v3 09/14] can: mcp251xfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 10/14] can: etas_es58x: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 11/14] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 12/14] can: kvaser_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 13/14] can: peak_canfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v3 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 00/14] can: add ethtool support and reporting of timestamping capabilities, Vincent Mailhol
- [PATCH v4 02/14] can: janz-ican3: add software tx timestamp, Vincent Mailhol
- [PATCH v4 01/14] can: can327: add software tx timestamps, Vincent Mailhol
- [PATCH v4 03/14] can: slcan: add software tx timestamps, Vincent Mailhol
- [PATCH v4 04/14] can: v(x)can: add software tx timestamps, Vincent Mailhol
- [PATCH v4 05/14] can: tree-wide: advertise software timestamping capabilities, Vincent Mailhol
- [PATCH v4 06/14] can: dev: add hardware TX timestamp, Vincent Mailhol
- [PATCH v4 07/14] can: dev: add generic function can_ethtool_op_get_ts_info_hwts(), Vincent Mailhol
- [PATCH v4 08/14] can: dev: add generic function can_eth_ioctl_hwts(), Vincent Mailhol
- [PATCH v4 09/14] can: mcp251xfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 10/14] can: etas_es58x: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 11/14] can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 12/14] can: kvaser_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 13/14] can: peak_canfd: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- [PATCH v4 14/14] can: peak_usb: advertise timestamping capabilities and add ioctl support, Vincent Mailhol
- Re: [PATCH v4 00/14] can: add ethtool support and reporting of timestamping capabilities, Marc Kleine-Budde
[PATCH v2 0/6] can: slcan: extend supported features (step 2),
Dario Binacchi
[RFC PATCH v6 0/7] can: support CAN XL,
Oliver Hartkopp
[PATCH net-next 0/1] pull-request: can-next 2022-07-21,
Marc Kleine-Budde
[PATCH] can: pch_can: move setting of errc to before use,
Tom Rix
[PATCH] can: pch_can: fix uninitialized use of errc,
Marc Kleine-Budde
[PATCH] can: j1939: Remove unnecessary WARN_ON_ONCE in j1939_sk_queue_activate_next_locked(),
Fedor Pchelkin
[PATCH net 0/2] pull-request: can 2022-07-20,
Marc Kleine-Budde
[PATCH net-next 0/29] pull-request: can-next 2022-07-20,
Marc Kleine-Budde
- [PATCH net-next 19/29] can: rcar_can: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 23/29] can: sun4i_can: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 15/29] can: peak_usb: pcan_dump_mem(): mark input prompt and data pointer as const, Marc Kleine-Budde
- [PATCH net-next 14/29] can: ctucanfd: Update CTU CAN FD IP core registers to match version 3.x., Marc Kleine-Budde
- [PATCH net-next 02/29] can: slcan: convert comments to network style comments, Marc Kleine-Budde
- [PATCH net-next 05/29] can: slcan: convert comparison to NULL into !val, Marc Kleine-Budde
- [PATCH net-next 11/29] can: sja1000: Change the return type as void for SoC specific init, Marc Kleine-Budde
- [PATCH net-next 09/29] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller, Marc Kleine-Budde
- [PATCH net-next 24/29] can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 20/29] can: sja1000: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 28/29] can: add CAN_ERR_CNT flag to notify availability of error counter, Marc Kleine-Budde
- [PATCH net-next 16/29] can: peak_usb: correction of an initially misnamed field name, Marc Kleine-Budde
- [PATCH net-next 03/29] can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level(), Marc Kleine-Budde
- [PATCH net-next 21/29] can: slcan: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 29/29] can: error: add definitions for the different CAN error thresholds, Marc Kleine-Budde
- [PATCH net-next 25/29] can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 12/29] can: slcan: do not sleep with a spin lock held, Marc Kleine-Budde
- [PATCH net-next 07/29] dt-bindings: can: sja1000: Convert to json-schema, Marc Kleine-Budde
- [PATCH net-next 26/29] can: usb_8dev: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 13/29] can: c_can: remove wrong comment, Marc Kleine-Budde
- [PATCH net-next 10/29] can: sja1000: Use device_get_match_data to get device data, Marc Kleine-Budde
- [PATCH net-next 22/29] can: hi311x: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 08/29] dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support, Marc Kleine-Budde
- [PATCH net-next 01/29] can: slcan: use scnprintf() as a hardening measure, Marc Kleine-Budde
- [PATCH net-next 18/29] can: pch_can: do not report txerr and rxerr during bus-off, Marc Kleine-Budde
- [PATCH net-next 04/29] can: slcan: fix whitespace issues, Marc Kleine-Budde
- [PATCH net-next 06/29] can: slcan: clean up if/else, Marc Kleine-Budde
- [PATCH net-next 17/29] can: peak_usb: include support for a new MCU, Marc Kleine-Budde
- [PATCH net-next 27/29] can: error: specify the values of data[5..7] of CAN error frames, Marc Kleine-Budde
[PATCH 1/3] can: peak_usb: constify characters string,
Stephane Grosjean
[RFC PATCH v5 0/5] can: support CAN XL,
Oliver Hartkopp
Re: Massive kernel messages by can_create_echo_skb(),
Oleksij Rempel
[RFC PATCH v4 0/5] can: support CAN XL,
Oliver Hartkopp
[linux-next:master] BUILD REGRESSION 036ad6daa8f0fd357af7f50f9da58539eaa6f68c, kernel test robot
[PATCH v1 0/1] can: ctucanfd: Update CTU CAN FD IP core registers to match version 3.x.,
Pavel Pisa
[RFC PATCH v3 0/5] can: support CAN XL,
Oliver Hartkopp
[RFC PATCH] can: can327: remove useless header inclusions,
Dario Binacchi
[PATCH] can: c_can: remove wrong comment, Dario Binacchi
[RFC PATCH 0/5] can: slcan: extend supported features (step 2),
Dario Binacchi
[PATCH] can: xilinx_can: add support for RX timestamps on Zynq,
Matej Vasilevski
[linux-next:master] BUILD REGRESSION 6014cfa5bf32cf8c5c58b3cfd5ee0e1542c8a825, kernel test robot
[PATCH v3] can: slcan: do not sleep with a spin lock held,
Dario Binacchi
[RFC PATCH v2 0/5] can: support CAN XL,
Oliver Hartkopp
[PATCH AUTOSEL 5.10 13/15] Revert "can: xilinx_can: Limit CANFD brp to 2", Sasha Levin
[PATCH AUTOSEL 5.15 23/28] Revert "can: xilinx_can: Limit CANFD brp to 2", Sasha Levin
[PATCH AUTOSEL 5.18 32/41] Revert "can: xilinx_can: Limit CANFD brp to 2", Sasha Levin
[linux-next:master] BUILD REGRESSION 4662b7adea50bb62e993a67f611f3be625d3df0d,
kernel test robot
[PATCH v2] can: slcan: do not sleep with a spin lock held,
Dario Binacchi
[PATCH] can: slcan: do not sleep with a spin lock held,
Dario Binacchi
vcan OpenWRT,
Sergio Alberto Valdivia
[PATCH v1 00/12] can: error: set of fixes and improvement on txerr and rxerr reporting,
Vincent Mailhol
- [PATCH v1 01/12] can: pch_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 02/12] can: rcar_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 03/12] can: sja1000: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 04/12] can: slcan: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 05/12] can: hi311x: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 06/12] can: sun4i_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 07/12] can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 08/12] can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 09/12] can: usb_8dev: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v1 10/12] can: error: specify the values of data[5..7] of CAN error frames, Vincent Mailhol
- [PATCH v1 12/12] can: error: add definitions for the different CAN error thresholds, Vincent Mailhol
- [PATCH v1 11/12] can: add CAN_ERR_CNT flag to notify availability of error counter, Vincent Mailhol
- [PATCH v2 00/12] can: error: set of fixes and improvement on txerr and rxerr reporting, Vincent Mailhol
- [PATCH v2 02/12] can: rcar_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 03/12] can: sja1000: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 01/12] can: pch_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 04/12] can: slcan: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 05/12] can: hi311x: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 09/12] can: usb_8dev: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 08/12] can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 06/12] can: sun4i_can: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 07/12] can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off, Vincent Mailhol
- [PATCH v2 12/12] can: error: add definitions for the different CAN error thresholds, Vincent Mailhol
- [PATCH v2 10/12] can: error: specify the values of data[5..7] of CAN error frames, Vincent Mailhol
- [PATCH v2 11/12] can: add CAN_ERR_CNT flag to notify availability of error counter, Vincent Mailhol
- Re: [PATCH v2 00/12] can: error: set of fixes and improvement on txerr and rxerr reporting, Marc Kleine-Budde
[PATCH] can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe(), Liang He
[RFC PATCH 0/5] can: support CAN XL,
Oliver Hartkopp
[Index of Archives]
[Automotive Discussions]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]
