[PATCH v2 1/3] dt-bindings: m_can: Add Documentation for transceiver regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some CAN transceivers have a standby line that needs to be asserted
before they can be used. Model this GPIO lines as an optional
fixed-regulator node. Document bindings for the same.

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
 Documentation/devicetree/bindings/net/can/m_can.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..f17e2a5207dc 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -48,6 +48,9 @@ Optional Subnode:
 			  that can be used for CAN/CAN-FD modes. See
 			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
 			  for details.
+
+- xceiver-supply: Regulator that powers the CAN transceiver.
+
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
-- 
2.19.2




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux