Re: [PATCH] bonding: do not enslave CAN devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/30/20 2:30 PM, Oliver Hartkopp wrote:
> Since commit 8df9ffb888c ("can: make use of preallocated can_ml_priv for per
> device struct can_dev_rcv_lists") the device specific CAN receive filter lists
> are stored in netdev_priv() and dev->ml_priv points to these filters.
> 
> In the bug report Syzkaller enslaved a vxcan1 CAN device and accessed the
> bonding device with a PF_CAN socket which lead to a crash due to an access of
> an unhandled bond_dev->ml_priv pointer.
> 
> Deny to enslave CAN devices by the bonding driver as the resulting bond_dev
> pretends to be a CAN device by copying dev->type without really being one.
> 
> Reported-by: syzbot+c3ea30e1e2485573f953@xxxxxxxxxxxxxxxxxxxxxxxxx
> Fixes: 8df9ffb888c ("can: make use of preallocated can_ml_priv for per
> device struct can_dev_rcv_lists")
> Cc: linux-stable <stable@xxxxxxxxxxxxxxx> # >= v5.4
> Signed-off-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Acked-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>

What's the preferred to upstream this? I could take this via the
linux-can tree.

regards,
Marc

> ---
>  drivers/net/bonding/bond_main.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index 48d5ec770b94..4b781a7dfd96 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -1475,6 +1475,18 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
>  		return -EPERM;
>  	}
>  
> +	/* CAN network devices hold device specific filter lists in
> +	 * netdev_priv() where dev->ml_priv sets a reference to.
> +	 * As bonding assumes to have some ethernet-like device it doesn't
> +	 * take care about these CAN specific filter lists today.
> +	 * So we deny the enslaving of CAN interfaces here.
> +	 */
> +	if (slave_dev->type == ARPHRD_CAN) {
> +		NL_SET_ERR_MSG(extack, "CAN devices can not be enslaved");
> +		slave_err(bond_dev, slave_dev, "no bonding on CAN devices\n");
> +		return -EINVAL;
> +	}
> +
>  	/* set bonding device ether type by slave - bonding netdevices are
>  	 * created with ether_setup, so when the slave type is not ARPHRD_ETHER
>  	 * there is a need to override some of the type dependent attribs/funcs.
> 


-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux