BerliOS has not been operating for more than five years. linux-can appears to have moved to GitHub. Signed-off-by: Diego Elio Pettenò <flameeyes@xxxxxxxxxxxxx> --- drivers/net/can/Kconfig | 4 ++-- drivers/net/can/softing/Kconfig | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 17c166cc8482..be1bcb012761 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -41,8 +41,8 @@ config CAN_SLCAN www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de Userspace tools to attach the SLCAN line discipline (slcan_attach, - slcand) can be found in the can-utils at the SocketCAN SVN, see - http://developer.berlios.de/projects/socketcan for details. + slcand) can be found in the can-utils at the linux-can project, see + https://github.com/linux-can/can-utils for details. The slcan driver supports up to 10 CAN netdevices by default which can be changed by the 'maxdev=xx' module option. This driver can diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 0f1708f99308..70ca800c1bfa 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -24,7 +24,7 @@ config CAN_SOFTING_CS Support for PCMCIA cards from Softing Gmbh & some cards from Vector Gmbh. You need firmware for these, which you can get at - http://developer.berlios.de/projects/socketcan/ + https://github.com/linux-can/can-firmware This version of the driver is written against firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) In order to use the card as CAN device, you need the Softing generic -- 2.26.0
