Linux ARM MSM

• Thread Index

• [PATCH v11] bus: mhi: host: Add tracing support
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcm6490-idp: Add configurations for gpio-keys
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v13 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v13 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v2 13/19] power: reset: msm-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 18/19] power: reset: syscon-poweroff: Move device data into a struct
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 19/19] power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 07/19] power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 17/19] power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 05/19] power: reset: tps65086-restart: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 06/19] power: reset: tps65086-restart: Remove unneeded device data struct
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 16/19] power: reset: gemini-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 01/19] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 08/19] power: reset: axxia-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 14/19] power: reset: regulator-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 03/19] power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 15/19] power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 12/19] power: reset: msm-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 00/19] Remove pm_power_off use in drivers/power/reset
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 11/19] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 02/19] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 09/19] power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 10/19] power: reset: rmobile-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 04/19] power: reset: xgene-reboot: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v4 10/15] ufs: host: wrapped keys support in ufs qcom
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 09/15] ufs: core: add support for generate, import and prepare keys
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v4 08/15] ufs: core: add support to derive software secret
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v4 06/15] soc: qcom: ice: support for generate, import and prepare key
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 05/15] soc: qcom: ice: support for hardware wrapped keys
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v7 12/12] arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 11/12] firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 10/12] firmware: qcom: tzmem: enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 08/12] firmware: qcom: qseecom: convert to using the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 09/12] firmware: qcom: scm: add support for SHM bridge operations
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 07/12] firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 06/12] firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 05/12] firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 04/12] firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 03/12] firmware: qcom: scm: smc: switch to using the SCM allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 02/12] firmware: qcom: scm: enable the TZ mem allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 01/12] firmware: qcom: add a dedicated TrustZone buffer allocator
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 00/12] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH v4 03/15] qcom_scm: scm call for create, prepare and import keys
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [Bisected] [commit dd6c3c544126] [linux-next] [6.8.0-rc2] Task hungs for infinite time call traces
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [net-next PATCH v6 10/10] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 09/10] net: phy: qcom: generalize some qca808x LED functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 08/10] net: phy: qcom: move common qca808x LED define to shared header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 07/10] net: phy: qcom: add support for QCA807x PHY Family
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 06/10] net: phy: provide whether link has changed in c37_read_status
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 05/10] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 04/10] net: phy: qcom: move more function to shared library
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 03/10] net: phy: add devm/of_phy_package_join helper
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 02/10] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 01/10] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 00/10] net: phy: Introduce PHY Package concept
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: PCI: qcom,pcie-sa8775p: move SA8775p to dedicated schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] dt-bindings: PCI: qcom,pcie-sc7280: move SC7280 to dedicated schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: PCI: qcom,pcie-sc8180x: move SC8180X to dedicated schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/3] dt-bindings: PCI: qcom: move to dedicated schema (part two)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  • From: Luca Weiss <luca@xxxxxxxxxxxx>
• Re: [PATCH 17/17] linux: v4l2-vp9.h: Fix kerneldoc
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/4] interconnect: qcom: sc7280: enable QoS configuration
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: interconnect: add clock property to configure QoS on SC7280
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: interconnect: add clock property to configure QoS on SC7280
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sc7280: Add clocks for QoS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v2 2/4] interconnect: qcom: sc7280: enable QoS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v2 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• [PATCH v2 0/4] Add support for QoS configuration
  • From: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
• Re: [RFC PATCH 5/6] arm64: dts: qcom: add base AIM500 dtsi
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] arm64: dts: qcom: add base AIM500 dtsi
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 3/6] soc: qcom: socinfo: Add SM8650P SoC ID table entry
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 2/6] dt-bindings: arm: qcom,ids: Add SoC ID for SM8650P
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] dt-bindings: arm: qcom: Document sm8650p soc and AIM500 AIoT board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH 6/6] arm64: dts: qcom: add AIM500 AIoT
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 5/6] arm64: dts: qcom: add base AIM500 dtsi
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 4/6] arm64: dts: qcom: sm8650p: introduce sm8650p dtsi
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 3/6] soc: qcom: socinfo: Add SM8650P SoC ID table entry
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 2/6] dt-bindings: arm: qcom,ids: Add SoC ID for SM8650P
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 1/6] dt-bindings: arm: qcom: Document sm8650p soc and AIM500 AIoT board
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• [RFC PATCH 0/6] arm64: dts: qcom: Introduce AIM500 platform device tree
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 17/17] linux: v4l2-vp9.h: Fix kerneldoc
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH 17/17] linux: v4l2-vp9.h: Fix kerneldoc
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 17/17] linux: v4l2-vp9.h: Fix kerneldoc
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH 3/3] arm64: defconfig: Enable QCOM PBS
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/3] Add PPG support for PMI632 LPG dtsi
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v13 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v13 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update bouncing @codeaurora addresses
  • From: Ritesh Harjani <ritesh.list@xxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Satya Durga Srinivasu Prabhala <quic_satyap@xxxxxxxxxxx>
• Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [EXTERNAL] [PATCH v4 05/15] soc: qcom: ice: support for hardware wrapped keys
  • From: Kamlesh Gurudasani <kamlesh@xxxxxx>
• Re: [RFC 1/9] of: provide a cleanup helper for OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [EXTERNAL] [PATCH v4 04/15] soc: qcom: ice: add hwkm support in ice
  • From: Kamlesh Gurudasani <kamlesh@xxxxxx>
• [PATCH] drm/msm/dpu: Only enable DSC_MODE_MULTIPLEX if dsc_merge is enabled
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] drm/msm/dsi: Replace dsi_get_bpp() with mipi_dsi header function
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v5] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/msm/dsi: Replace dsi_get_bpp() with mipi_dsi header function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v2 2/3] net: mdio: ipq4019: add support for clock-frequency property
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v7 09/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 10/10] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 08/10] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 06/10] coresight-tpdm: Add support to configure CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 04/10] coresight-tpdm: Add CMB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 03/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 00/10] Add support to configure TPDM CMB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v7 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v1 08/16] misc: fastrpc: Add support to allocate shared context bank
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] f2fs: doc: Fix bouncing email address for Sahitya Tummala
  • From: Chao Yu <chao@xxxxxxxxxx>
• Re: [PATCH v1 03/16] misc: fastrpc: Add static PD restart support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 1 MHz
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: Allow UFS regulators load/mode setting
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 1 MHz
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set names for i2c hid nodes
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/6] Device-tree improvements for Lenovo Flex/Yoga 5G laptop
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: fix GPU firmware path
  • From: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6115: Fix missing interconnect-names
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcm6490-idp: Include PM7250B
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RESEND v6] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: defconfig: Enable Qualcomm interconnect providers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/2] arm64: qcom: sm8650: add support for USB-C Altmode
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-qrd: enable Touchscreen
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1 03/16] misc: fastrpc: Add static PD restart support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 1/2] interconnect: qcom: sm8650: Use correct ACV enable_mask
  • From: neil.armstrong@xxxxxxxxxx
• [PATCH] drm/msm/dp: allow voltage swing / pre emphasis of 3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next PATCH 0/2] net: phy: qcom: qca808x: fixup qca808x LED
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v10] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v10] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2] bus: mhi: ep: Use kcalloc() instead of kzalloc()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 0/2] Enable D3 support for Qualcomm bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 09/18] power: reset: rmobile-reset: Use devm_register_sys_off_handler(RESTART)
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v13 41/53] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 36/53] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 52/53] ASoC: qcom: Populate SoC components string
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 33/53] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 03/53] xhci: Add interrupt pending autoclear flag to each interrupter
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 05/53] xhci: make isoc_bei_interval variable interrupter specific.
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 06/53] xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event()
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 17/53] usb: host: xhci-sideband: Expose a sideband interrupter enable API
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 47/53] ASoC: usb: Fetch ASoC sound card information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 44/53] ASoC: qcom: qdsp6: Add PCM ops to track current state
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 31/53] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 22/53] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 30/53] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 53/53] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 12/53] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 46/53] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 49/53] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 16/53] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 24/53] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 15/53] xhci: export XHCI IMOD setting helper for interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 51/53] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 37/53] ASoC: dt-bindings: Add Q6USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 14/53] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 00/53] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 11/53] xhci: Decouple handling an event from checking for unhandled events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 42/53] ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 08/53] xhci: move event processing for one interrupter to a separate function
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 39/53] ALSA: usb-audio: qcom: Populate PCM and USB chip information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 02/53] xhci: fix off by one check when adding a secondary interrupter.
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 38/53] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 43/53] ASoC: Add SND kcontrol for fetching USB offload status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 18/53] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 40/53] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 07/53] xhci: update event ring dequeue pointer position to controller correctly
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 28/53] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 25/53] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 34/53] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 09/53] xhci: add helper that checks for unhandled events on a event ring
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 10/53] xhci: Don't check if the event ring is valid before every event TRB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 29/53] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 19/53] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 26/53] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 45/53] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 13/53] usb: host: xhci: Export enable and disable interrupter APIs
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 21/53] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 27/53] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 23/53] ASoC: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 04/53] xhci: Add helper to set an interrupters interrupt moderation interval
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v13 01/53] xhci: fix possible null pointer dereference at secondary interrupter removal
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: Re: [PATCH] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 6/9] remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v4 01/10] dt-bindings: iommu: Add Translation Buffer Unit bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/9] remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
  • From: Andrew Davis <afd@xxxxxx>
• Re: [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY package nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/9] remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• [PATCH] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Enable D3 support for Qualcomm bridges
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 9/9] remoteproc: stm32: Use devm_rproc_alloc() helper
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [PATCH v4 10/10] clk: qcom: Add camcc clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 09/10] clk: qcom: Add TCSR clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 08/10] clk: qcom: Add GPU clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 07/10] clk: qcom: Add dispcc clock driver for x1e80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 06/10] clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 05/10] dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 04/10] dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 03/10] dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 02/10] dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 01/10] dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v4 00/10] clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v3 0/2] PCI: qcom: Add PCIe support for X1E80100
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH] dt-bindings: net: bluetooth: qualcomm: Fix bouncing @codeaurora
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v1 01/18] thermal: core: Change governor name to const char pointer
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RESEND PATCH v6 02/12] firmware: qcom: scm: enable the TZ mem allocator
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [RESEND PATCH v6 02/12] firmware: qcom: scm: enable the TZ mem allocator
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v3 08/24] hwtracing: switch to use of_graph_get_next_device_endpoint()
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v3 06/24] media: platform: switch to use of_graph_get_next_device_endpoint()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 05/24] media: i2c: switch to use of_graph_get_next_device_endpoint()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH] bus: mhi: ep: Use kcalloc() instead of kzalloc()
  • From: Erick Archer <erick.archer@xxxxxxx>
• Re: [PATCH v1 08/18] thermal: intel: pch_thermal: Migrate to thermal_zone_device_register()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH] ASoC: dt-bindings: google,sc7280-herobrine: Drop bouncing @codeaurora
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v1 02/18] thermal: Add new structures and thermal_zone_device_register()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] Documentation: embargoed-hardware-issues.rst: Fix Trilok's email
  • From: Carlos Bilbao <carlos.bilbao@xxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] Documentation: embargoed-hardware-issues.rst: Fix Trilok's email
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: x1e80100: Add missing ACV enable_mask
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] f2fs: doc: Fix bouncing email address for Sahitya Tummala
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] Documentation: embargoed-hardware-issues.rst: Fix Trilok's email
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] Documentation: embargoed-hardware-issues.rst: Fix Trilok's email
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH] MAINTAINERS: Update bouncing @codeaurora addresses
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 06/18] power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: pm4125: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 02/16] misc: fastrpc: Add support for unsigned PD
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: Add initial support for rb5gen2 SOM
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH 0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
  • From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
• Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [GIT PULL] Add Audio topology firmware for Qualcomm SM8550 HDK platform
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: Re: [PATCH v4 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [GIT PULL] Add Audio topology firmware for Qualcomm SM8650 MTP platform
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] arm64: dts: qcom: msm8953: Add GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] arm64: dts: qcom: msm8953: Add GPU IOMMU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: x1e80100: Add missing ACV enable_mask
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] interconnect: qcom: sm8650: Use correct ACV enable_mask
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: usb: qcom,pmic-typec: add support for the PM4125 block
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] pinctrl: Add lock to ensure the state atomization
  • From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
• [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: Maria Yu <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v1 08/18] thermal: intel: pch_thermal: Migrate to thermal_zone_device_register()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [net-next PATCH v3 0/2] net: mdio-ipq4019: fix wrong default MDC rate
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: Re: Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 03/18] thermal: Directly use thermal_zone_platform_params for thermal_zone_device
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Antoine Tenart <atenart@xxxxxxxxxx>
• Re: [PATCH v1 00/18] Thermal: Part 1 - Introduce new structs and registration
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 01/18] thermal: core: Change governor name to const char pointer
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Enable D3 support for Qualcomm bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v6 04/10] coresight-tpdm: Add CMB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v6 10/10] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 09/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 08/10] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 06/10] coresight-tpdm: Add support to configure CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 03/10] dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 00/10] Add support to configure TPDM CMB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v6 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/2] Enable D3 support for Qualcomm bridges
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [RFC 6/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 02/18] thermal: Add new structures and thermal_zone_device_register()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v1 00/16] Add missing features to FastRPC driver
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v1] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] PCI: qcom: Enable D3 support for the recent PCI bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 1/2] PCI: Add a flag to enable D3 support for PCI bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH 0/2] Enable D3 support for Qualcomm bridges
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v1 16/16] misc: fastrpc: Add system unsigned PD support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 15/16] misc: fastrpc: Restrict untrusted apk to spawn privileged PD
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 14/16] misc: fastrpc: Add DSP signal support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 13/16] misc: fastrpc: Add wakelock management support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 12/16] misc: fastrpc: Add support for users to clean up DSP user PD
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 11/16] misc: fastrpc: Add DSP PD notification support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 10/16] misc: fastrpc: Add polling mode support for fastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 09/16] misc: fastrpc: Add early wakeup support for fastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 08/16] misc: fastrpc: Add support to allocate shared context bank
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 07/16] misc: fastrpc: Add support to save and restore interrupted
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 06/16] misc: fastrpc: Capture kernel and DSP performance counters
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 05/16] misc: fastrpc: Add CRC support for remote buffers
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 04/16] misc: fastrpc: Add fastrpc multimode invoke request support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 03/16] misc: fastrpc: Add static PD restart support
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 02/16] misc: fastrpc: Add support for unsigned PD
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 01/16] misc: fastrpc: Redesign remote heap management
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1 00/16] Add missing features to FastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH v1] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• Re: [PATCH 11/17] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add board-id support for multiple DT selection
  • From: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
• Re: [PATCH net-next 0/7] net: ipa: simplify TX power handling
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 6/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 2/2] interconnect: qcom: x1e80100: Add missing ACV enable_mask
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• [PATCH 0/2] interconnect: qcom: ACV enable_mask fixes
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• [PATCH 1/2] interconnect: qcom: sm8650: Use correct ACV enable_mask
  • From: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
• Re: [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 8/9] net: phy: qcom: generalize some qca808x LED functions
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC 0/9] power: sequencing: implement the subsystem and add first users
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] Add QCOM PBS driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: pm4125: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: usb: qcom,pmic-typec: add support for the PM4125 block
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/4] arm64: dts: qcom: qrb2210-rb1: enable Type-C support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PM4125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: Re: [PATCH v4 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm6115: Fix missing interconnect-names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [RFC 3/9] power: sequencing: new subsystem
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 1/9] of: provide a cleanup helper for OF nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: [PATCH v4 1/3] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/8] arm64: dts: qcom: sa8295p: Enable GPU
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: apq8026-lg-lenok: Add vibrator support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8960: expressatt: Add gpio-keys
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/4] phy: qcom: qmp-usbc: enable SDM660 support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/8] Add UFS support for SC7180/SM7125
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 00/33] spi: get rid of some legacy macros
  • From: "Jarkko Sakkinen" <jarkko@xxxxxxxxxx>
• Re: [PATCH] arm64: defconfig: Enable Qualcomm interconnect providers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: defconfig: Enable Qualcomm interconnect providers
  • From: Bjorn Andersson via B4 Relay <devnull+quic_bjorande.quicinc.com@xxxxxxxxxx>
• Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [PATCH v4 02/10] dt-bindings: iommu: Add Qualcomm TBU bindings
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 10/10] arm64: dts: qcom: sc7280: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 00/10] Add support for Translation Buffer Units
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 08/10] dt-bindings: arm-smmu: Add TBU support for sc7280
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 03/10] iommu/arm-smmu-qcom: Add support for TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 09/10] iommu/arm-smmu-qcom: Use the custom fault handler on more platforms
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 07/10] arm64: dts: qcom: sdm845: Add DT nodes for the TBUs
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 05/10] iommu/arm-smmu: Allow using a threaded handler for context interrupts
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 04/10] iommu/arm-smmu-qcom-tbu: Add Qualcomm TBU driver
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 06/10] iommu/arm-smmu-qcom: Use a custom context fault handler for sdm845
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• [PATCH v4 01/10] dt-bindings: iommu: Add Translation Buffer Unit bindings
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 2/2] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 0/2] Add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8550: Add dma-coherent property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 08/18] thermal: intel: pch_thermal: Migrate to thermal_zone_device_register()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 03/18] thermal: Directly use thermal_zone_platform_params for thermal_zone_device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1 1/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: fix GPU firmware path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 5/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: Allow UFS regulators load/mode setting
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 4/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set touchpad i2c frequency to 10 kHz
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 3/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: enable touchscreen
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: sc8180x-lenovo-flex-5g: set names for i2c hid nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v1 02/18] thermal: Add new structures and thermal_zone_device_register()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: qcom: Add X1E80100 PCIe support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 05/11] arm64: dts: qcom: x1e80100: Add TCSR node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 05/11] arm64: dts: qcom: x1e80100: Add TCSR node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 17/17] arm64: dts: qcom: sm8650: Fix UFS PHY clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 02/17] phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 13/15] dt-bindings: crypto: ice: document the hwkm property
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 14/17] drm/msm/dpu: modify encoder programming for CDM over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1 01/18] thermal: core: Change governor name to const char pointer
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1 00/18] Thermal: Part 1 - Introduce new structs and registration
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 14/18] power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 18/18] power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 13/18] power: reset: regulator-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 08/18] power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 16/18] power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 05/18] power: reset: tps65086-restart: Remove unneeded device data struct
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 04/18] power: reset: tps65086-restart: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 09/18] power: reset: rmobile-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 03/18] power: reset: xgene-reboot: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 12/18] power: reset: msm-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 15/18] power: reset: gemini-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 06/18] power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 10/18] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 02/18] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 17/18] power: reset: syscon-poweroff: Move device data into a struct
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 11/18] power: reset: msm-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 00/18] Remove pm_power_off use in drivers/power/reset
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 07/18] power: reset: axxia-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 01/18] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 07/46] Loongarch: reserved_mem: Implement the new processing order for reserved memory
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• Re: [PATCH 14/46] sh: reserved_mem: Implement the new processing order for reserved memory
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• Re: [net-next PATCH v5 3/9] net: phy: add devm/of_phy_package_join helper
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 51b70ff55ed88edd19b080a524063446bcc34b62
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v5 3/9] net: phy: add devm/of_phy_package_join helper
  • From: Antoine Tenart <atenart@xxxxxxxxxx>
• Re: [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Antoine Tenart <atenart@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: pm4125: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 02/15] qcom_scm: scm call for deriving a software secret
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 4/9] power: pwrseq: add a driver for the QCA6390 PMU module
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 5/9] Bluetooth: qca: use the power sequencer for QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 7/9] PCI: hold the rescan mutex when scanning for the first time
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 6/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 3/9] power: sequencing: new subsystem
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 1/9] of: provide a cleanup helper for OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC 0/9] power: sequencing: implement the subsystem and add first users
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [net-next PATCH v5 9/9] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 8/9] net: phy: qcom: generalize some qca808x LED functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 7/9] net: phy: qcom: add support for QCA807x PHY Family
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 6/9] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 5/9] dt-bindings: net: add QCA807x PHY defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 4/9] net: phy: qcom: move more function to shared library
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 3/9] net: phy: add devm/of_phy_package_join helper
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 2/9] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 0/9] net: phy: Introduce PHY Package concept
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [RESEND PATCH v6 00/12] arm64: qcom: add and enable SHM Bridge support
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 15/15] arm64: dts: qcom: sm8550: add hwkm support to ufs ice
  • From: neil.armstrong@xxxxxxxxxx
• [net-next PATCH 2/2] net: phy: qcom: qca808x: default to LED active High if not set
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 1/2] net: phy: qcom: qca808x: fix logic error in LED brightness set
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 0/2] net: phy: qcom: qca808x: fixup qca808x LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v5 05/10] coresight-tpda: Add support to configure CMB element
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [V2] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v4 15/15] arm64: dts: qcom: sm8550: add hwkm support to ufs ice
  • From: Om Prakash Singh <quic_omprsing@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: net: qcom,ipa: do not override firmware-name $ref
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [GIT PULL] Add Audio topology firmware for Qualcomm SM8550 HDK platform
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-hdk: correct WCD9385 route and port mapping
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550-hdk: correct WCD9385 route and port mapping
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v4] phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH] clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v3] phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v4 2/3] HID: i2c-hid-of: Remove comment about post-reset in DT binding
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Enquiry Details
  • From: info@xxxxxxxxxx
• Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 11/17] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-x13s: Enable touchscreen
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 14/17] drm/msm/dpu: modify encoder programming for CDM over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v4 2/3] HID: i2c-hid-of: Remove comment about post-reset in DT binding
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-x13s: Fix/enable touchscreen
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-x13s: Enable touchscreen
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v5 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v3] phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v12 04/41] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 11/17] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 14/17] drm/msm/dpu: modify encoder programming for CDM over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: fix the programming of INTF_CFG2_DATA_HCTL_EN
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [net-next PATCH v4 0/5] net: phy: split at803x
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3 02/24] of: property: use unsigned int return on of_graph_get_endpoint_count()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Drop unreachable reviewer for Qualcomm ETHQOS ethernet driver
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH] MAINTAINERS: Drop unreachable reviewer for Qualcomm ETHQOS ethernet driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v3 14/24] of: property: add of_graph_get_next_endpoint()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: qcom: sc8280xp-x13s: Fix/enable touchscreen
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: [PATCH v2] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: ufs: qcom: Make reset properties as required
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] drm/msm/dp: Try looking for link-frequencies into the port@0's endpoint first
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] drm/msm/dp: Try looking for link-frequencies into the port@0's endpoint first
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 2/3] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 14/46] sh: reserved_mem: Implement the new processing order for reserved memory
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 07/46] Loongarch: reserved_mem: Implement the new processing order for reserved memory
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] drm/msm/gem: Fix double resv lock aquire
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
• [linux-next:master] BUILD REGRESSION 06f658aadff0e483ee4f807b0b46c9e5cba62bfa
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• Re: [PATCH V2 4/4] cpufreq: scmi: Register for limit change notifications
  • From: Pierre Gondois <pierre.gondois@xxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 4/6] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iommu/arm-smmu-qcom: Add X1E80100 MDSS compatible
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: ipq6018: add ipq6000 CPU OPP tables
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/3] arm64: dts: qcom: ipq6018: separate CPU OPP tables
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/5] PM: domains: Allow devices attached to genpd to be managed by HW
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: ipq6018: add ipq6000 CPU OPP tables
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8550-qrd: enable Touchscreen
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH V2 2/4] firmware: arm_scmi: Add perf_freq_xlate interface
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH V2 1/4] firmware: arm_scmi: Add perf_notify_support interface
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH V2 1/4] firmware: arm_scmi: Add perf_notify_support interface
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH] drm/atomic-helpers: remove legacy_cursor_update hacks
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH 2/3] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH v8 10/10] soc: qcom: register ramoops region with APSS minidump
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 08/10] pstore/ram: Add dynamic ramoops region support through commandline
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 09/10] pstore/ram: Add ramoops information notifier support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 06/10] soc: qcom: Add Qualcomm APSS minidump kernel driver
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 07/10] MAINTAINERS: Add entry for minidump related files
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 05/10] init: export linux_banner data variable
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 04/10] remoteproc: qcom: Remove minidump related data from qcom_common.c
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 03/10] remoteproc: qcom_q6v5_pas: Use qcom_rproc_minidump()
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 02/10] soc: qcom: Add qcom_rproc_minidump module
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 01/10] docs: qcom: Add qualcomm minidump guide
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• [PATCH v8 00/10] Add Qualcomm APSS Minidump driver related support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>