Re: [PATCH v8 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/13/2024 2:07 AM, Tengfei Fan wrote:
> QCS8550 is derived from SM8550. The differnece between SM8550 and

spellcheck s/difference/difference 

> QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
> in IoT scenarios.

IoT products and not scenarios. 

> QCS8550 firmware has different memory map with SM8550 firmware. 

"QCS8550 firmware has different memory map compared to SM8550"


The
> memory map will be runtime added through bootloader.


> There are 3 types of reserved memory regions here:
> 1. Firmware related regions which aren't shared with kernel.
>     The device tree source in kernel doesn't need to have node to indicate
> the firmware related reserved information. OS bootloader conveys the

Just "Bootloader conveys the information by updating devicetree at runtime" ?

> information by update device tree in runtime.
>     This will be described as: UEFI saves the physical address of the
> UEFI System Table to dts file's chosen node. Kernel read this table and
> add reserved memory regions to efi config table. Current reserved memory
> region may have reserved region which was not yet used, release note of
> the firmware have such kind of information.

I understand what you are trying to explain below, but can we simplify further? I 
had to read multiple times to understand what you are trying to convey above. 

> 2. Firmware related memory regions which are shared with Kernel
>     Each region has a specific node with specific label name for later
> phandle reference from other driver dt node.
> 3. PIL regions.

Do we use the PIL - peripheral image loader in the upstream kernel or just remoteproc?
I am fine w/ PIL if it is used at other places in Qualcomm remoteproc. 

>     PIL regions will be reserved and then assigned to subsystem firmware
> later.
> Here is a reserved memory map for this platform:
> 0x100000000 +------------------+
>             |                  |
>             | Firmware Related |
>             |                  |
>  0xd4d00000 +------------------+
>             |                  |
>             | Kernel Available |

What is "kernel available" means? 

>             |                  |
>  0xa7000000 +------------------+
>             |                  |
>             |    PIL Region    |
>             |                  |
>  0x8a800000 +------------------+
>             |                  |
>             | Firmware Related |
>             |                  |
>  0x80000000 +------------------+

> Note that:

Do we need to write "Note that:" ? 

> 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
> it is available for kernel usage. This region is not suggested to be
> used by kernel features like ramoops, suspend resume etc.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs8550.dtsi | 169 ++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550.dtsi b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
> new file mode 100644
> index 000000000000..a3ebf3d4e16d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550.dtsi
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "sm8550.dtsi"
> +
> +/delete-node/ &reserved_memory;
> +
> +/ {
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +
> +		/* These are 3 types of reserved memory regions here:
> +		 * 1. Firmware related regions which aren't shared with kernel.
> +		 *     The device tree source in kernel doesn't need to have node to
> +		 * indicate the firmware related reserved information. OS bootloader
> +		 * conveys the information by update device tree in runtime.
> +		 *     This will be described as: UEFI saves the physical address of
> +		 * the UEFI System Table to dts file's chosen node. Kernel read this
> +		 * table and add reserved memory regions to efi config table. Current
> +		 * reserved memory region may have reserved region which was not yet
> +		 * used, release note of the firmware have such kind of information.
> +		 * 2. Firmware related memory regions which are shared with Kernel.
> +		 *     Each region has a specific node with specific label name for
> +		 * later phandle reference from other driver dt node.
> +		 * 3. PIL regions.
> +		 *     PIL regions will be reserved and then assigned to subsystem
> +		 * firmware later.
> +		 * Here is a reserved memory map for this platform:

Just check the comment above and it will apply here. 

> +		 * 0x100000000 +------------------+
> +		 *             |                  |
> +		 *             | Firmware Related |
> +		 *             |                  |
> +		 *  0xd4d00000 +------------------+
> +		 *             |                  |
> +		 *             | Kernel Available |
> +		 *             |                  |
> +		 *  0xa7000000 +------------------+
> +		 *             |                  |
> +		 *             |    PIL Region    |
> +		 *             |                  |
> +		 *  0x8a800000 +------------------+
> +		 *             |                  |
> +		 *             | Firmware Related |
> +		 *             |                  |
> +		 *  0x80000000 +------------------+
> +		 * Note that:
> +		 * 0xa7000000..0xA8000000 is used by bootloader, when kernel boot up,
> +		 * it is available for kernel usage. This region is not suggested to
> +		 * be used by kernel features like ramoops, suspend resume etc.
> +		 */
> +
> +		/*
> +		 * Firmware related regions, bootlader will possible reserve parts of

spellcheck s/bootlader/bootloader

> +		 * region from 0x80000000..0x8a800000.
> +		 */
> +		aop_image_mem: aop-image-region@81c00000 {
> +			reg = <0x0 0x81c00000 0x0 0x60000>;
> +			no-map;
> +		};
> +
> +		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
> +			compatible = "qcom,cmd-db";
> +			reg = <0x0 0x81c60000 0x0 0x20000>;
> +			no-map;
> +		};
> +
> +		aop_config_mem: aop-config-region@81c80000 {
> +			no-map;
> +			reg = <0x0 0x81c80000 0x0 0x20000>;
> +		};
> +
> +		smem_mem: smem-region@81d00000 {
> +			compatible = "qcom,smem";
> +			reg = <0x0 0x81d00000 0x0 0x200000>;
> +			hwlocks = <&tcsr_mutex 3>;
> +			no-map;
> +		};
> +
> +		adsp_mhi_mem: adsp-mhi-region@81f00000 {
> +			reg = <0x0 0x81f00000 0x0 0x20000>;
> +			no-map;
> +		};
> +
> +		/* PIL region */
> +		mpss_mem: mpss-region@8a800000 {
> +			reg = <0x0 0x8a800000 0x0 0x10800000>;
> +			no-map;
> +		};
> +
> +		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
> +			reg = <0x0 0x9b000000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		ipa_fw_mem: ipa-fw-region@9b080000 {
> +			reg = <0x0 0x9b080000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		ipa_gsi_mem: ipa-gsi-region@9b090000 {
> +			reg = <0x0 0x9b090000 0x0 0xa000>;
> +			no-map;
> +		};
> +
> +		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
> +			reg = <0x0 0x9b09a000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		spss_region_mem: spss-region@9b100000 {
> +			reg = <0x0 0x9b100000 0x0 0x180000>;
> +			no-map;
> +		};
> +
> +		spu_secure_shared_memory_mem: spu-secure-shared-memory-region@9b280000 {
> +			reg = <0x0 0x9b280000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		camera_mem: camera-region@9b300000 {
> +			reg = <0x0 0x9b300000 0x0 0x800000>;
> +			no-map;
> +		};
> +
> +		video_mem: video-region@9bb00000 {
> +			reg = <0x0 0x9bb00000 0x0 0x700000>;
> +			no-map;
> +		};
> +
> +		cvp_mem: cvp-region@9c200000 {
> +			reg = <0x0 0x9c200000 0x0 0x700000>;
> +			no-map;
> +		};
> +
> +		cdsp_mem: cdsp-region@9c900000 {
> +			reg = <0x0 0x9c900000 0x0 0x2000000>;
> +			no-map;
> +		};
> +
> +		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
> +			reg = <0x0 0x9e900000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
> +			reg = <0x0 0x9e980000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		adspslpi_mem: adspslpi-region@9ea00000 {
> +			reg = <0x0 0x9ea00000 0x0 0x4080000>;
> +			no-map;
> +		};
> +
> +		/*
> +		 * Firmware related regions, bootlader will possible reserve parts of

Ditto. 

> +		 * region from 0xd8000000..0x100000000.
> +		 */
> +		mpss_dsm_mem: mpss_dsm_region@d4d00000 {
> +			reg = <0x0 0xd4d00000 0x0 0x3300000>;
> +			no-map;
> +		};
> +	};
> +};
-- 
---Trilok Soni





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux