Hi Caleb,
On Wed May 8, 2024 at 1:28 AM CEST, Caleb Connolly wrote:
> The SHIFTphone 8 is an upcoming QCM6490 smartphone, it has the following
> features:
>
> * 12GB of RAM, 512GB UFS storage
> * 1080p display.
> * Hardware kill switches for cameras and microphones
> * UART access via type-c SBU pins (enabled by an internal switch)
>
> Initial support includes:
>
> * Framebuffer display
> * UFS and sdcard storage
> * Battery monitoring and USB role switching via pmic glink
> * Bluetooth
> * Thermals
>
> Wifi is not yet functional due to a crash in the remoteproc
> firmware.
>
> Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 938 +++++++++++++++++++++++
> 2 files changed, 939 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 7d40ec5e7d21..678e800ac797 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -92,8 +92,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
> new file mode 100644
> index 000000000000..ceef8b9b2414
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
> @@ -0,0 +1,938 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Based largely on Fairphone 5 DT.
:) But not sure this needs to be in the file, in the commit message
would be enough imo
> + *
> + * Copyright (c) 2023, Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> + * Copyright (c) 2024, Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#define PM7250B_SID 8
> +#define PM7250B_SID1 9
> +
> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc7280.dtsi"
Sort the list of PMICs by alphabet? Also I guess you can keep the
comments I have in fp5.dts which has the 'real' model of the PMIC
> +#include "pmk8350.dtsi" /* PMK7325 */
> +#include "pm7325.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pm7250b.dtsi"
> +
> +/* There is also a pmr735a */
This thing also exists on FP5 (named SDR-735-*), but I don't think it's
accessible to Linux - or that Linux needs to do anything with it.
Downstream I also didn't see something for it iirc.
> +
> +/delete-node/ &rmtfs_mem;
> +
> +/ {
> + model = "SHIFT SHIFTphone 8";
> + compatible = "shift,otter", "qcom,qcm6490";
> + chassis-type = "handset";
> +
> + aliases {
> + serial0 = &uart5;
> + serial1 = &uart7;
> + };
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + stdout-path = "serial0:115200n8";
> +
> + framebuffer0: framebuffer@a000000 {
> + compatible = "simple-framebuffer";
> + reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>;
> + width = <1080>;
> + height = <2400>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&volume_down_default>;
> + pinctrl-names = "default";
> +
> + key-volume-up {
> + label = "Volume up";
> + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + debounce-interval = <15>;
> + };
> + };
> +
> + pmic-glink {
> + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_hs_in: endpoint {
> + remote-endpoint = <&usb_1_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss_in: endpoint {
> + remote-endpoint = <&usb_dp_qmpphy_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + pmic_glink_sbu: endpoint {
> + remote-endpoint = <&fsa4480_sbu_mux>;
> + };
> + };
> + };
> + };
> + };
> +
> + reserved-memory {
> + cont_splash_mem: cont-splash@e1000000 {
> + reg = <0x0 0xe1000000 0x0 0x2300000>;
> + no-map;
> + };
> +
> + cdsp_mem: cdsp@88f00000 {
> + reg = <0x0 0x88f00000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + rmtfs_mem: memory@f8500000 {
rmtfs@
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0xf8500000 0x0 0x600000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
> + };
> + };
> +
> + thermal-zones {
> + camera-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8350_adc_tm 2>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + chg-skin-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pm7250b_adc_tm 0>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + conn-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pm7250b_adc_tm 1>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + quiet-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8350_adc_tm 1>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + rear-cam-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8350_adc_tm 4>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + sdm-skin-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8350_adc_tm 3>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + xo-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-sensors = <&pmk8350_adc_tm 0>;
> +
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> + };
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm7325-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vreg_s1b: smps1 {
> + regulator-min-microvolt = <1840000>;
> + regulator-max-microvolt = <2040000>;
> + };
> +
> + vreg_s7b: smps7 {
> + regulator-min-microvolt = <535000>;
> + regulator-max-microvolt = <1120000>;
> + };
> +
> + vreg_s8b: smps8 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
> + };
> +
> + vreg_l1b: ldo1 {
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b: ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3b: ldo3 {
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <910000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b: ldo6 {
> + regulator-min-microvolt = <1140000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b: ldo7 {
> + /* Constrained for UFS VCC, at least until UFS driver scales voltage */
> + regulator-min-microvolt = <2952000>;
> + regulator-max-microvolt = <2952000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b: ldo8 {
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b: ldo9 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b: ldo11 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b: ldo12 {
> + regulator-min-microvolt = <751000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b: ldo13 {
> + regulator-min-microvolt = <530000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b: ldo14 {
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b: ldo15 {
> + regulator-min-microvolt = <765000>;
> + regulator-max-microvolt = <1020000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b: ldo16 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b: ldo17 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l18b: ldo18 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l19b: ldo19 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_s1c: smps1 {
> + regulator-min-microvolt = <2190000>;
> + regulator-max-microvolt = <2210000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s9c: smps9 {
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1170000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c: ldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c: ldo2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c: ldo3 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c: ldo4 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5c: ldo5 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c: ldo6 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7c: ldo7 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c: ldo8 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c: ldo9 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c: ldo10 {
> + regulator-min-microvolt = <720000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c: ldo11 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12c: ldo12 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13c: ldo13 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> + };
> + };
> +};
> +
> +&gcc {
> + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
> + <GCC_EDP_CLKREF_EN>,
> + <GCC_MSS_CFG_AHB_CLK>,
> + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
> + <GCC_MSS_OFFLINE_AXI_CLK>,
> + <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
> + <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> + <GCC_MSS_SNOC_AXI_CLK>,
> + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> + <GCC_QSPI_CORE_CLK>,
> + <GCC_QSPI_CORE_CLK_SRC>,
> + <GCC_SEC_CTRL_CLK_SRC>,
> + <GCC_WPSS_AHB_BDG_MST_CLK>,
> + <GCC_WPSS_AHB_CLK>,
> + <GCC_WPSS_RSCP_CLK>;
> +};
> +
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> +&gpu {
> + status = "okay";
> +};
> +
> +&gpu_zap_shader {
> + firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* PM8008 PMIC @ 8 and 9 */
> + /* rtc6226 FM receiver @ 64 */
> +
> + typec-mux@42 {
> + compatible = "fcs,fsa4480";
> + reg = <0x42>;
> +
> + vcc-supply = <&vreg_bob>;
> +
> + mode-switch;
> + orientation-switch;
> +
> + port {
> + fsa4480_sbu_mux: endpoint {
> + remote-endpoint = <&pmic_glink_sbu>;
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* tas2563 audio codec @ 4d */
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + /* TMS(?) NFC @ 28 */
> + /* Ti drv2624 haptics @ 5a */
> +};
> +
> +&i2c13 {
> + status = "okay";
> +
> + /* focaltech FT3658U @ 38 */
> +};
> +
> +&ipa {
> + qcom,gsi-loader = "self";
> + memory-region = <&ipa_fw_mem>;
> + firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn";
> + status = "okay";
> +};
> +
> +&pm7250b_adc {
> + channel@4d {
> + reg = <ADC5_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "charger_skin_therm";
> + };
> +
> + channel@4f {
> + reg = <ADC5_AMUX_THM3_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "conn_therm";
> + };
> +};
> +
> +&pm7250b_adc_tm {
> + status = "okay";
> +
> + charger-skin-therm@0 {
> + reg = <0>;
> + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + conn-therm@1 {
> + reg = <1>;
> + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +};
> +
> +&pm7325_gpios {
> + volume_down_default: volume-down-default-state {
> + pins = "gpio6";
> + function = PMIC_GPIO_FUNC_NORMAL;
> + power-source = <1>;
> + bias-pull-up;
> + input-enable;
> + };
> +};
> +
> +&pmk8350_adc_tm {
> + status = "okay";
> +
> + xo-therm@0 {
> + reg = <0>;
> + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + quiet-therm@1 {
> + reg = <1>;
> + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + cam-flash-therm@2 {
> + reg = <2>;
> + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + sdm-skin-therm@3 {
> + reg = <3>;
> + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +
> + wide-rfc-therm@4 {
> + reg = <4>;
> + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time-us = <200>;
> + };
> +};
> +
> +&pmk8350_rtc {
> + status = "okay";
> +};
> +
> +&pmk8350_vadc {
> + status = "okay";
> +
> + channel@44 {
> + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pmk8350_xo_therm";
> + };
> +
> + channel@144 {
> + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm7325_quiet_therm";
> + };
> +
> + channel@145 {
> + reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm7325_cam_flash_therm";
> + };
> +
> + channel@146 {
> + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm7325_sdm_skin_therm";
> + };
> +
> + channel@147 {
> + reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + label = "pm7325_wide_rfc_therm";
> + };
> +};
> +
> +&pon_pwrkey {
> + status = "okay";
> +};
> +
> +&pon_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +&qup_spi13_cs {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&qup_spi13_data_clk {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&qup_uart5_rx {
> + drive-strength = <2>;
> + bias-disable;
> +};
> +
> +&qup_uart5_tx {
> + drive-strength = <2>;
> + bias-disable;
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_mpss {
> + firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_wpss {
> + firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn";
> + /*
> + * FIXME: wpss remoteproc crashes during boot with:
> + * qcom_q6v5_pas 8a00000.remoteproc: fatal error received:
> + * cmnos_thread.c:4645:Asserted in
> + * cmnos_allocram.c:cmnos_allocram_base_with_alignment_recurse:497
> + * with Args:0x3,0x3,0x0
> + */
> + status = "disabled";
> +};
> +
> +&sdc2_clk {
> + drive-strength = <16>;
> + bias-disable;
> +};
> +
> +&sdc2_cmd {
> + drive-strength = <10>;
> + bias-pull-up;
> +};
> +
> +&sdc2_data {
> + drive-strength = <10>;
> + bias-pull-up;
> +};
> +
> +&sdhc_2 {
> + vmmc-supply = <&vreg_l9c>;
> + vqmmc-supply = <&vreg_l6c>;
> +
> + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> +
> + status = "okay";
> +};
> +
> +&tlmm {
> + /*
> + * 48-52: protected by XPU, not sure why.
> + */
> + gpio-reserved-ranges = <48 4>;
If they really shouldn't be protected from firmware level (fingerprint
reader or whatnot), somebody at SHIFT should patch TZ firmware and
change the owner from TZ to HLOS.
> +
> + bluetooth_enable_default: bluetooth-enable-default-state {
> + pins = "gpio85";
> + function = "gpio";
> + output-low;
> + bias-disable;
> + };
> +
> + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
> + pins = "gpio28";
> + function = "gpio";
> + /*
> + * Configure a bias-bus-hold on CTS to lower power
> + * usage when Bluetooth is turned off. Bus hold will
> + * maintain a low power state regardless of whether
> + * the Bluetooth module drives the pin in either
> + * direction or leaves the pin fully unpowered.
> + */
> + bias-bus-hold;
> + };
> +
> + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
> + pins = "gpio29";
> + function = "gpio";
> + /*
> + * Configure pull-down on RTS. As RTS is active low
> + * signal, pull it low to indicate the BT SoC that it
> + * can wakeup the system anytime from suspend state by
> + * pulling RX low (by sending wakeup bytes).
> + */
> + bias-pull-down;
> + };
> +
> + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
> + pins = "gpio30";
> + function = "gpio";
> + /*
> + * Configure pull-up on TX when it isn't actively driven
> + * to prevent BT SoC from receiving garbage during sleep.
> + */
> + bias-pull-up;
> + };
> +
> + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
> + pins = "gpio31";
> + function = "gpio";
> + /*
> + * Configure a pull-up on RX. This is needed to avoid
> + * garbage data when the TX pin of the Bluetooth module
> + * is floating which may cause spurious wakeups.
> + */
> + bias-pull-up;
> + };
> +
> + sw_ctrl_default: sw-ctrl-default-state {
> + pins = "gpio86";
> + function = "gpio";
> + bias-pull-down;
> + };
> +};
> +
> +&uart5 {
> + compatible = "qcom,geni-debug-uart";
This should be redundant soon if the author resends anytime soon
https://lore.kernel.org/linux-arm-msm/20240416105650.2626-1-quic_vdadhani@xxxxxxxxxxx/
Don't see anything wrong with the rest
Regards
Luca
> + status = "okay";
> +};
> +
> +&uart7 {
> + /delete-property/interrupts;
> + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
> +
> + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
> + pinctrl-names = "default", "sleep";
> +
> + status = "okay";
> +
> + bluetooth: bluetooth {
> + compatible = "qcom,wcn6750-bt";
> +
> + pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
> + pinctrl-names = "default";
> +
> + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
> + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
> +
> + vddio-supply = <&vreg_l19b>;
> + vddaon-supply = <&vreg_s7b>;
> + vddbtcxmx-supply = <&vreg_s7b>;
> + vddrfacmn-supply = <&vreg_s7b>;
> + vddrfa0p8-supply = <&vreg_s7b>;
> + vddrfa1p7-supply = <&vreg_s1b>;
> + vddrfa1p2-supply = <&vreg_s8b>;
> + vddrfa2p2-supply = <&vreg_s1c>;
> + vddasd-supply = <&vreg_l11c>;
> +
> + max-speed = <3200000>;
> + };
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l7b>;
> + vcc-max-microamp = <800000>;
> + /*
> + * Technically l9b enables an eLDO (supplied by s1b) which then powers
> + * VCCQ2 of the UFS.
> + */
> + vccq-supply = <&vreg_l9b>;
> + vccq-max-microamp = <900000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l10c>;
> + vdda-pll-supply = <&vreg_l6b>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "otg";
> + usb-role-switch;
> +};
> +
> +&usb_1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_dp_qmpphy_out {
> + remote-endpoint = <&pmic_glink_ss_in>;
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l10c>;
> + vdda18-supply = <&vreg_l1c>;
> + vdda33-supply = <&vreg_l2b>;
> +
> + qcom,hs-crossover-voltage-microvolt = <28000>;
> + qcom,hs-output-impedance-micro-ohms = <2600000>;
> + qcom,hs-rise-fall-time-bp = <5430>;
> + qcom,hs-disconnect-bp = <1743>;
> + qcom,hs-amplitude-bp = <2430>;
> +
> + qcom,pre-emphasis-amplitude-bp = <20000>;
> + qcom,pre-emphasis-duration-bp = <20000>;
> +
> + qcom,squelch-detector-bp = <(-2090)>;
> +
> + orientation-switch;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l6b>;
> + vdda-pll-supply = <&vreg_l1b>;
> +
> + status = "okay";
> +};
> +
> +&wifi {
> + qcom,ath11k-calibration-variant = "SHIFTphone_8";
> +
> + /* FIXME: wpss remoteproc crashes during init */
> + status = "disabled";
> +};
