Re: [PATCH 1/1] PCI : Refactoring error log prints for better readability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 17, 2024 at 04:29:23PM +0530, Onkarnarth wrote:
> From: Onkarnath <onkarnath.1@xxxxxxxxxxx>

I think that the $subject should be similar to:
https://patchwork.kernel.org/comment/25712288/
rather than the generic "refactoring error log".

> 
> As %pe is already introduced, it's better to use it in place of (%ld) or (%d) for
> printing error in logs. It will enhance readability of logs.
> 
> Error print style is more consistent now.
> 
> Co-developed-by: Maninder Singh <maninder1.s@xxxxxxxxxxx>
> Signed-off-by: Maninder Singh <maninder1.s@xxxxxxxxxxx>
> Signed-off-by: Onkarnath <onkarnath.1@xxxxxxxxxxx>
> ---
> Suggested by Bjorn Helgaas in below discussion
> https://patchwork.kernel.org/comment/25712288/

Since you have indicated that Bjorn has suggested it, shouldn't there
also be a "Suggested-by tag" in the commit message?

> 
>  drivers/pci/bus.c                             |   2 +-
>  drivers/pci/controller/dwc/pci-dra7xx.c       |   2 +-
>  drivers/pci/controller/dwc/pci-meson.c        |  16 +--
>  drivers/pci/controller/dwc/pcie-armada8k.c    |   4 +-
>  drivers/pci/controller/dwc/pcie-histb.c       |   6 +-
>  drivers/pci/controller/dwc/pcie-intel-gw.c    |  10 +-
>  drivers/pci/controller/dwc/pcie-keembay.c     |   2 +-
>  drivers/pci/controller/dwc/pcie-kirin.c       |   6 +-
>  drivers/pci/controller/dwc/pcie-qcom-ep.c     |  18 +--
>  drivers/pci/controller/dwc/pcie-qcom.c        |  18 +--
>  drivers/pci/controller/dwc/pcie-tegra194.c    | 132 +++++++++---------
>  drivers/pci/controller/dwc/pcie-uniphier-ep.c |   2 +-
>  drivers/pci/controller/pci-aardvark.c         |   6 +-
>  drivers/pci/controller/pci-ftpci100.c         |   2 +-
>  drivers/pci/controller/pci-tegra.c            |  86 ++++++------
>  drivers/pci/controller/pci-xgene.c            |   4 +-
>  drivers/pci/controller/pcie-microchip-host.c  |   2 +-
>  drivers/pci/controller/pcie-rcar-host.c       |  14 +-
>  drivers/pci/controller/pcie-rockchip.c        |  34 ++---
>  drivers/pci/controller/vmd.c                  |   2 +-
>  drivers/pci/doe.c                             |   4 +-
>  drivers/pci/endpoint/functions/pci-epf-mhi.c  |   8 +-
>  drivers/pci/endpoint/functions/pci-epf-ntb.c  |   2 +-
>  drivers/pci/endpoint/functions/pci-epf-test.c |   4 +-
>  drivers/pci/endpoint/functions/pci-epf-vntb.c |   2 +-
>  drivers/pci/endpoint/pci-ep-cfs.c             |  12 +-
>  drivers/pci/endpoint/pci-epf-core.c           |  16 +--
>  drivers/pci/hotplug/acpiphp_core.c            |   2 +-
>  drivers/pci/hotplug/pciehp_core.c             |   8 +-
>  drivers/pci/hotplug/shpchp_core.c             |   4 +-
>  drivers/pci/of.c                              |   6 +-
>  drivers/pci/pci-driver.c                      |   4 +-
>  drivers/pci/pcie/dpc.c                        |   4 +-
>  drivers/pci/quirks.c                          |   2 +-
>  drivers/pci/setup-bus.c                       |   2 +-
>  drivers/pci/slot.c                            |   4 +-
>  drivers/pci/vgaarb.c                          |   2 +-
>  37 files changed, 227 insertions(+), 227 deletions(-)
> 
> diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
> index 826b5016a101..dbc16cf5a246 100644
> --- a/drivers/pci/bus.c
> +++ b/drivers/pci/bus.c
> @@ -351,7 +351,7 @@ void pci_bus_add_device(struct pci_dev *dev)
>  	dev->match_driver = !dn || of_device_is_available(dn);
>  	retval = device_attach(&dev->dev);
>  	if (retval < 0 && retval != -EPROBE_DEFER)
> -		pci_warn(dev, "device attach failed (%d)\n", retval);
> +		pci_warn(dev, "device attach failed: %pe\n", ERR_PTR(retval));

Is there a reason behind dropping the parantheses?

>  
>  	pci_dev_assign_added(dev, true);
>  }
> diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
> index d2d17d37d3e0..79b6cc7f0287 100644
> --- a/drivers/pci/controller/dwc/pci-dra7xx.c
> +++ b/drivers/pci/controller/dwc/pci-dra7xx.c
> @@ -801,7 +801,7 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
>  	reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
>  	if (IS_ERR(reset)) {
>  		ret = PTR_ERR(reset);
> -		dev_err(&pdev->dev, "gpio request failed, ret %d\n", ret);
> +		dev_err(&pdev->dev, "gpio request failed: %pe\n", ERR_PTR(ret));

Similar question as above regarding converting "failed, ret" to
"failed:". Is this a new convention that is expected to be followed,
where all errors are supposed to have "failed: %pe", rather than custom
statements? Please let me know if this has already been discussed
elsewhere.

[...]

Regards,
Siddharth.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux