All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8450.dtsi | 1 -
arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 16 ++++-----
arch/arm64/boot/dts/qcom/sm8450.dtsi | 64 ++++-----------------------------
3 files changed, 13 insertions(+), 68 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi
index ae5bce3cf46e..decb8809fd36 100644
--- a/arch/arm64/boot/dts/qcom/pm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi
@@ -10,7 +10,6 @@ / {
thermal-zones {
pm8450-thermal {
polling-delay-passive = <100>;
- polling-delay = <0>;
thermal-sensors = <&pm8450_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 3be46b56c723..27b80f52d5bf 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -138,7 +138,7 @@ pmic_glink_sbu: endpoint {
thermal-zones {
camera-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 2>;
trips {
@@ -152,7 +152,7 @@ active-config0 {
rear-tof-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 5>;
trips {
@@ -166,7 +166,7 @@ active-config0 {
skin-msm-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 1>;
trips {
@@ -180,7 +180,7 @@ active-config0 {
therm1-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 3>;
trips {
@@ -194,7 +194,7 @@ active-config0 {
therm2-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 6>;
trips {
@@ -208,7 +208,7 @@ active-config0 {
usb-conn-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 7>;
trips {
@@ -222,7 +222,7 @@ active-config0 {
wide-rfc-thermal {
polling-delay-passive = <250>;
- polling-delay = <0>;
+
thermal-sensors = <&pmk8350_adc_tm 4>;
trips {
@@ -235,8 +235,6 @@ active-config0 {
};
xo-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 0>;
trips {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 616461fcbab9..ee60fd257efe 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4610,8 +4610,6 @@ sound: sound {
thermal-zones {
aoss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
@@ -4630,8 +4628,6 @@ reset-mon-cfg {
};
cpuss0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
trips {
@@ -4650,8 +4646,6 @@ reset-mon-cfg {
};
cpuss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
trips {
@@ -4670,8 +4664,6 @@ reset-mon-cfg {
};
cpuss3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
trips {
@@ -4690,8 +4682,6 @@ reset-mon-cfg {
};
cpuss4-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
trips {
@@ -4710,8 +4700,6 @@ reset-mon-cfg {
};
cpu4-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
trips {
@@ -4736,8 +4724,6 @@ cpu4_top_crit: cpu-crit {
};
cpu4-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
trips {
@@ -4762,8 +4748,6 @@ cpu4_bottom_crit: cpu-crit {
};
cpu5-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
@@ -4788,8 +4772,6 @@ cpu5_top_crit: cpu-crit {
};
cpu5-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
@@ -4814,8 +4796,6 @@ cpu5_bottom_crit: cpu-crit {
};
cpu6-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
trips {
@@ -4840,8 +4820,6 @@ cpu6_top_crit: cpu-crit {
};
cpu6-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
trips {
@@ -4866,8 +4844,6 @@ cpu6_bottom_crit: cpu-crit {
};
cpu7-top-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
trips {
@@ -4892,8 +4868,6 @@ cpu7_top_crit: cpu-crit {
};
cpu7-middle-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
trips {
@@ -4918,8 +4892,6 @@ cpu7_middle_crit: cpu-crit {
};
cpu7-bottom-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
trips {
@@ -4945,7 +4917,7 @@ cpu7_bottom_crit: cpu-crit {
gpu-top-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens0 14>;
cooling-maps {
@@ -4984,7 +4956,7 @@ gpu_top_alert0: trip-point0 {
gpu-bottom-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens0 15>;
cooling-maps {
@@ -5022,8 +4994,6 @@ gpu_bottom_alert0: trip-point0 {
};
aoss1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 0>;
trips {
@@ -5042,8 +5012,6 @@ reset-mon-cfg {
};
cpu0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
trips {
@@ -5068,8 +5036,6 @@ cpu0_crit: cpu-crit {
};
cpu1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
trips {
@@ -5094,8 +5060,6 @@ cpu1_crit: cpu-crit {
};
cpu2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
trips {
@@ -5120,8 +5084,6 @@ cpu2_crit: cpu-crit {
};
cpu3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 4>;
trips {
@@ -5147,7 +5109,7 @@ cpu3_crit: cpu-crit {
cdsp0-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 5>;
trips {
@@ -5179,7 +5141,7 @@ cdsp_0_config: junction-config {
cdsp1-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 6>;
trips {
@@ -5211,7 +5173,7 @@ cdsp_1_config: junction-config {
cdsp2-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 7>;
trips {
@@ -5242,8 +5204,6 @@ cdsp_2_config: junction-config {
};
video-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 8>;
trips {
@@ -5263,7 +5223,7 @@ reset-mon-cfg {
mem-thermal {
polling-delay-passive = <10>;
- polling-delay = <0>;
+
thermal-sensors = <&tsens1 9>;
trips {
@@ -5288,8 +5248,6 @@ reset-mon-cfg {
};
modem0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 10>;
trips {
@@ -5320,8 +5278,6 @@ reset-mon-cfg {
};
modem1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 11>;
trips {
@@ -5352,8 +5308,6 @@ reset-mon-cfg {
};
modem2-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 12>;
trips {
@@ -5384,8 +5338,6 @@ reset-mon-cfg {
};
modem3-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 13>;
trips {
@@ -5416,8 +5368,6 @@ reset-mon-cfg {
};
camera0-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 14>;
trips {
@@ -5436,8 +5386,6 @@ reset-mon-cfg {
};
camera1-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
thermal-sensors = <&tsens1 15>;
trips {
--
2.40.1
