On Fri, May 03, 2024 at 04:51:04PM +0300, Georgi Djakov wrote: > Hi Varada, > > Thank you for your work on this! > > On 2.05.24 12:30, Varadarajan Narayanan wrote: > > On Tue, Apr 30, 2024 at 12:05:29PM +0200, Konrad Dybcio wrote: > > > On 25.04.2024 12:26 PM, Varadarajan Narayanan wrote: > > > > On Tue, Apr 23, 2024 at 02:58:41PM +0200, Konrad Dybcio wrote: > > > > > > > > > > > > > > > On 4/18/24 11:23, Varadarajan Narayanan wrote: > > > > > > IPQ SoCs dont involve RPM in managing NoC related clocks and > > > > > > there is no NoC scaling. Linux itself handles these clocks. > > > > > > However, these should not be exposed as just clocks and align > > > > > > with other Qualcomm SoCs that handle these clocks from a > > > > > > interconnect provider. > > > > > > > > > > > > Hence include icc provider capability to the gcc node so that > > > > > > peripherals can use the interconnect facility to enable these > > > > > > clocks. > > > > > > > > > > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > > > > > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> > > > > > > --- > > > > > > > > > > If this is all you do to enable interconnect (which is not the case, > > > > > as this patch only satisfies the bindings checker, the meaningful > > > > > change happens in the previous patch) and nothing explodes, this is > > > > > an apparent sign of your driver doing nothing. > > > > > > > > It appears to do nothing because, we are just enabling the clock > > > > provider to also act as interconnect provider. Only when the > > > > consumers are enabled with interconnect usage, this will create > > > > paths and turn on the relevant NOC clocks. > > > > > > No, with sync_state it actually does "something" (sets the interconnect > > > path bandwidths to zero). And *this* patch does nothing functionally, > > > it only makes the dt checker happy. > > > > I understand. > > > > > > This interconnect will be used by the PCIe and NSS blocks. When > > > > those patches were posted earlier, they were put on hold until > > > > interconnect driver is available. > > > > > > > > Once this patch gets in, PCIe for example will make use of icc. > > > > Please refer to https://lore.kernel.org/linux-arm-msm/20230519090219.15925-5-quic_devipriy@xxxxxxxxxxx/. > > > > > > > > The 'pcieX' nodes will include the following entries. > > > > > > > > interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>, > > > > <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>; > > > > interconnect-names = "pcie-mem", "cpu-pcie"; > > > > > > Okay. What about USB that's already enabled? And BIMC/MEMNOC? > > > > For USB, the GCC_ANOC_USB_AXI_CLK is enabled as part of the iface > > clock. Hence, interconnect is not specified there. > > > > MEMNOC to System NOC interfaces seem to be enabled automatically. > > Software doesn't have to turn on or program specific clocks. > > > > > > > The expected reaction to "enabling interconnect" without defining the > > > > > required paths for your hardware would be a crash-on-sync_state, as all > > > > > unused (from Linux's POV) resources ought to be shut down. > > > > > > > > > > Because you lack sync_state, the interconnects silently retain the state > > > > > that they were left in (which is not deterministic), and that's precisely > > > > > what we want to avoid. > > > > > > > > I tried to set 'sync_state' to icc_sync_state to be invoked and > > > > didn't see any crash. > > > > > > Have you confirmed that the registers are actually written to, and with > > > correct values? > > > > I tried the following combinations:- > > > > 1. Top of tree linux-next + This patch set > > > > * icc_sync_state called > > * No crash or hang observed > > * From /sys/kernel/debug/clk/clk_summary can see the > > relevant clocks are set to the expected rates (compared > > with downstream kernel) > > > > 2. Top of tree linux-next + This patch set + PCIe enablement > > > > * icc_sync_state NOT called > > If sync_state() is not being called, that usually means that there > are interconnect consumers that haven't probed successfully (PCIe?) > or their dependencies. That can be checked in /sys/class/devlink/.../status > But i am not sure how this works for PCI devices however. > > You can also manually force a call to sync_state by writing "1" to > the interconnect provider's /sys/devices/.../state_synced > > Anyway, the question is if PCIe and NSS work without this driver? No. > If they work, is this because the clocks are turned on by default > or by the boot loader? Initially, the PCIe/NSS driver enabled these clocks directly by having them in their DT nodes itself. Based on community feedback this was removed and after that PCIe/NSS did not work. > Then if an interconnect path (clock) gets disabled either when we > reach a sync_state (with no bandwidth requests) or we explicitly > call icc_set_bw() with 0 bandwidth values, i would expect that > these PCIe and NSS devices would not function anymore (it might > save some power etc) and if this is unexpected we should see a > a crash or hang... > > Can you confirm this? With ICC enabled, icc_set_bw (with non-zero values) is called by PCIe and NSS drivers. Haven't checked with icc_set_bw with zero values. PCIe: qcom_pcie_probe -> qcom_pcie_icc_init -> icc_set_bw NSS: ppe_icc_init -> icc_set_bw I believe sync_state is not getting called since there is a non-zero set bandwidth request. Which seems to be aligned with your explanation. Thanks Varada > > Thanks, > Georgi > > > * No crash or hang observed > > * From /sys/kernel/debug/clk/clk_summary can see the > > relevant clocks are set to the expected rates (compared > > with downstream kernel) > > > > Does this answer your question? Please let me know if you were > > looking for some other information. > > > > Thanks > > Varada > > >
