[PATCH v2 14/31] arm64: dts: qcom: qcs404-*: Remove thermal zone polling delays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index ac451f378056..ba7fe56a75b3 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1600,7 +1600,6 @@ wcss_smp2p_in: slave-kernel {
 	thermal-zones {
 		aoss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -1615,7 +1614,6 @@ aoss_alert0: trip-point0 {
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -1630,7 +1628,6 @@ q6_hvx_alert0: trip-point0 {
 
 		lpass-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -1645,7 +1642,6 @@ lpass_alert0: trip-point0 {
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 3>;
 
@@ -1660,7 +1656,6 @@ wlan_alert0: trip-point0 {
 
 		cluster-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -1694,7 +1689,6 @@ map0 {
 
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -1728,7 +1722,6 @@ map0 {
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 6>;
 
@@ -1762,7 +1755,6 @@ map0 {
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 7>;
 
@@ -1796,7 +1788,6 @@ map0 {
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 8>;
 
@@ -1830,7 +1821,6 @@ map0 {
 
 		gpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 9>;
 

-- 
2.40.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux