[PATCH] clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0
which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6
and not gpll0.

Adjust the parents of these clocks to make Linux report the correct rate
and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz.

Corrected rates are the following:

  gpll7              807999902 Hz
  gpll6              768000000 Hz
     gpll6_out_even  384000000 Hz
  gpll0              600000000 Hz
     gpll0_out_odd   200000000 Hz
     gpll0_out_even  300000000 Hz

And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz)
that clock also reports the correct rate now and avoids this warning:

  [    5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 drivers/clk/qcom/gcc-sm6350.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm6350.c b/drivers/clk/qcom/gcc-sm6350.c
index cf4a7b6e0b23..0559a33faf00 100644
--- a/drivers/clk/qcom/gcc-sm6350.c
+++ b/drivers/clk/qcom/gcc-sm6350.c
@@ -100,8 +100,8 @@ static struct clk_alpha_pll gpll6 = {
 		.enable_mask = BIT(6),
 		.hw.init = &(struct clk_init_data){
 			.name = "gpll6",
-			.parent_hws = (const struct clk_hw*[]){
-				&gpll0.clkr.hw,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
 			},
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_fixed_fabia_ops,
@@ -124,7 +124,7 @@ static struct clk_alpha_pll_postdiv gpll6_out_even = {
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "gpll6_out_even",
 		.parent_hws = (const struct clk_hw*[]){
-			&gpll0.clkr.hw,
+			&gpll6.clkr.hw,
 		},
 		.num_parents = 1,
 		.ops = &clk_alpha_pll_postdiv_fabia_ops,
@@ -139,8 +139,8 @@ static struct clk_alpha_pll gpll7 = {
 		.enable_mask = BIT(7),
 		.hw.init = &(struct clk_init_data){
 			.name = "gpll7",
-			.parent_hws = (const struct clk_hw*[]){
-				&gpll0.clkr.hw,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
 			},
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_fixed_fabia_ops,

---
base-commit: dd5a440a31fae6e459c0d6271dddd62825505361
change-id: 20240508-sm6350-gpll-fix-a308bb393434

Best regards,
-- 
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux