RE: [PATCH v4 4/5] PCI: imx6: Convert to agnostic GPIO API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Sent: 2024年5月6日 22:21
> To: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>; Frank Li
> <frank.li@xxxxxxx>; Krzysztof Wilczy?ski <kwilczynski@xxxxxxxxxx>; Andy
> Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>; linux-omap@xxxxxxxxxxxxxxx;
> linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> linux-amlogic@xxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx;
> linux-tegra@xxxxxxxxxxxxxxx
> Cc: Vignesh Raghavendra <vigneshr@xxxxxx>; Siddharth Vadapalli
> <s-vadapalli@xxxxxx>; Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>; Krzysztof
> Wilczy?ski <kw@xxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Bjorn Helgaas
> <bhelgaas@xxxxxxxxxx>; Hongxing Zhu <hongxing.zhu@xxxxxxx>; Lucas Stach
> <l.stach@xxxxxxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>; Sascha Hauer
> <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>;
> Fabio Estevam <festevam@xxxxxxxxx>; Yue Wang <yue.wang@xxxxxxxxxxx>;
> Neil Armstrong <neil.armstrong@xxxxxxxxxx>; Kevin Hilman
> <khilman@xxxxxxxxxxxx>; Jerome Brunet <jbrunet@xxxxxxxxxxxx>; Martin
> Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>; Xiaowei Song
> <songxiaowei@xxxxxxxxxxxxx>; Binghui Wang <wangbinghui@xxxxxxxxxxxxx>;
> Thierry Reding <thierry.reding@xxxxxxxxx>; Jonathan Hunter
> <jonathanh@xxxxxxxxxx>; Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>;
> Pali Rohár <pali@xxxxxxxxxx>; Linus Walleij <linus.walleij@xxxxxxxxxx>
> Subject: [PATCH v4 4/5] PCI: imx6: Convert to agnostic GPIO API
> 
> The of_gpio.h is going to be removed. In preparation of that convert the driver to
> the agnostic API.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 36 ++++++++-------------------
>  1 file changed, 10 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 917c69edee1d..62a4994c5501 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,14 +11,13 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/kernel.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_address.h>
>  #include <linux/pci.h>
>  #include <linux/platform_device.h>
> @@ -107,8 +106,7 @@ struct imx6_pcie_drvdata {
> 
>  struct imx6_pcie {
>  	struct dw_pcie		*pci;
> -	int			reset_gpio;
> -	bool			gpio_active_high;
> +	struct gpio_desc	*reset_gpiod;
>  	bool			link_is_up;
>  	struct clk_bulk_data	clks[IMX6_PCIE_MAX_CLKS];
>  	struct regmap		*iomuxc_gpr;
> @@ -721,9 +719,7 @@ static void imx6_pcie_assert_core_reset(struct
> imx6_pcie *imx6_pcie)
>  	}
> 
>  	/* Some boards don't have PCIe reset GPIO. */
> -	if (gpio_is_valid(imx6_pcie->reset_gpio))
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> -					imx6_pcie->gpio_active_high);
> +	gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 1);
>  }
> 
>  static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) @@
> -771,10 +767,9 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie
> *imx6_pcie)
>  	}
> 
>  	/* Some boards don't have PCIe reset GPIO. */
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> +	if (imx6_pcie->reset_gpiod) {
>  		msleep(100);
> -		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> -					!imx6_pcie->gpio_active_high);
> +		gpiod_set_value_cansleep(imx6_pcie->reset_gpiod, 0);
>  		/* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
>  		msleep(100);
>  	}
> @@ -1285,22 +1280,11 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
>  		return PTR_ERR(pci->dbi_base);
> 
>  	/* Fetch GPIOs */
> -	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
> -	imx6_pcie->gpio_active_high = of_property_read_bool(node,
> -						"reset-gpio-active-high");
> -	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> -		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> -				imx6_pcie->gpio_active_high ?
> -					GPIOF_OUT_INIT_HIGH :
> -					GPIOF_OUT_INIT_LOW,
> -				"PCIe reset");
> -		if (ret) {
> -			dev_err(dev, "unable to get reset gpio\n");
> -			return ret;
> -		}
> -	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> -		return imx6_pcie->reset_gpio;
> -	}
Hi Andy:
Please correct me if my understand is wrong.
The "reset-gpio-active-high" property is added for some buggy board designs.
On these buggy boards, the reset gpio is active high.
In the other words, the PERST# is active and remote endpoint device would
be in reset stat when this gpio is high on these buggy boards.

I'm afraid that the PCIe would be broken on these boards, If these codes
 are removed totally, and toggle the reset GPIO pin like below.
...
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
msleep(100);
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
...

By the way, this reset GPIO pin should be high at end in
imx6_pcie_deassert_core_reset() if the imx6_pcie->gpio_active_high is zero. 

Best Regards
Richard Zhu

> +	imx6_pcie->reset_gpiod = devm_gpiod_get_optional(dev, "reset",
> GPIOD_OUT_HIGH);
> +	if (IS_ERR(imx6_pcie->reset_gpiod))
> +		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpiod),
> +				     "unable to get reset gpio\n");
> +	gpiod_set_consumer_name(imx6_pcie->reset_gpiod, "PCIe reset");
> 
>  	if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS)
>  		return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n");
> --
> 2.43.0.rc1.1336.g36b5255a03ac





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux