On Wed, 15 May 2024 at 17:05, Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx> wrote: > > On Wed, May 08, 2024 at 09:31:24AM -0500, Rob Herring (Arm) wrote: > > > > On Mon, 06 May 2024 18:14:10 -0500, Bjorn Andersson wrote: > > > On Fri, Apr 26, 2024 at 07:54:42PM GMT, Prahlad Valluru wrote: > > > > From: Venkata Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx> > > > > > > > > > > Please don't thread new versions off existing version. b4 helps you with > > > getting these things right, please check go/upstream for more details. > > > > > > > Enable lt9611uxc bridge for qcs6490 rb3 gen2 platform. > > > > > > > > > > Even if it's clear what this is, I would prefer if you described the > > > hardware a little bit in your commit message. > > > "Rb3Gen2 has a HDMI connector, connected to DSI via a LT on i2cX.... reset and > > > irq pins comes from x and y. Describe this." > > > > > > > Signed-off-by: Prahlad Valluru <quic_vvalluru@xxxxxxxxxxx> > > > > --- > > > > v2: Addressed dtschema errors > > > > - Fixed lt9611-irq > > > > - vdd-supply error to be ignored, as it is connected to > > > > input supply directly, on rb3gen2 > > > > The choice is either fix the dts or fix the binding. > > vdd-supply is mandatory for lt9611. Only in case of rb3gen2, we are seeing this > error, since it is connected to supply directly. Will add dummy vreg to address this. s/add dummy vreg/describe fixed hardware register/ -- With best wishes Dmitry
