[PATCH v2 01/31] arm64: dts: qcom: ipq6018-*: Remove thermal zone polling delays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 17ab6c475958..2d05b77201aa 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -923,7 +923,6 @@ pcie@0 {
 	thermal-zones {
 		nss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 4>;
 
 			trips {
@@ -937,7 +936,6 @@ nss-top-critical {
 
 		nss-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 5>;
 
 			trips {
@@ -951,7 +949,6 @@ nss-critical {
 
 		wcss-phya0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 7>;
 
 			trips {
@@ -979,7 +976,6 @@ wcss-phya1-critical {
 
 		cpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 13>;
 
 			trips {
@@ -1009,7 +1005,6 @@ map0 {
 
 		lpass-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 14>;
 
 			trips {
@@ -1023,7 +1018,6 @@ lpass-critical {
 
 		ddrss-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 			thermal-sensors = <&tsens 15>;
 
 			trips {

-- 
2.40.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux