The OF graph should describe physical signals. There is no 'role switch'
signal between Type-C connector and the DWC3 USB controller. Rename
endpoints to mention USB HS signal instead (this follows the example
lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and all PMIC
GLINK platforms).
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++----
arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 8 ++++----
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cd0db4f31d4a..44239d1e57e9 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1356,8 +1356,8 @@ &usb_1_dwc3 {
usb-role-switch;
};
-&usb_1_role_switch_out {
- remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm8150b_hs_in>;
};
&usb_1_hsphy {
@@ -1465,8 +1465,8 @@ ports {
port@0 {
reg = <0>;
- pm8150b_role_switch_in: endpoint {
- remote-endpoint = <&usb_1_role_switch_out>;
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 41f117474872..3596dd328c31 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -659,8 +659,8 @@ ports {
port@0 {
reg = <0>;
- pm8150b_role_switch_in: endpoint {
- remote-endpoint = <&usb_1_role_switch_out>;
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
};
};
};
@@ -725,8 +725,8 @@ &usb_1_hsphy {
status = "okay";
};
-&usb_1_role_switch_out {
- remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm8150b_hs_in>;
};
&ufs_mem_hc {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8ccade628f1f..0ec473ceb3d2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4226,7 +4226,7 @@ usb_1_dwc3: usb@a600000 {
phy-names = "usb2-phy", "usb3-phy";
port {
- usb_1_role_switch_out: endpoint {};
+ usb_1_dwc3_hs_out: endpoint {};
};
};
};
--
2.39.2
