Re: [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/8/2024 10:40 PM, mr.nuke.me@xxxxxxxxx wrote:
On 5/8/24 1:16 AM, Devi Priya wrote:


On 5/1/2024 9:58 AM, Alexandru Gagniuc wrote:
There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series
addresses pcie2, which is a gen3x2 port. The board I have only uses
pcie2, and that's the only one enabled in this series. pcie3 is added
as a special request, but is untested.

I believe this makes sense as a monolithic series, as the individual
pieces are not that useful by themselves.

Hi Alexandru,

As Dmitry suggested, we are working on enabling the PCIe NOC clocks
via Interconnect. We will be posting the PCIe series with
Interconnect support [1] shortly.

I am generally very hesitant to depend on unmerged series, as this can cause undue delays. In this particular case, I considered that both series can continue to stay independent, with the ability to convert the PCIe users to the new clock scheme when the time is right.

[1] - https://lore.kernel.org/linux-arm-msm/20240430064214.2030013-1-quic_varada@xxxxxxxxxxx/

What changes would be needed to this series to make use of this? How does one use the "interconnected" clocks?

Alex
Hi Alex,

Please refer to the latest PCIe series which adds support for enabling
the NoC clocks via interconnect.

https://lore.kernel.org/linux-arm-msm/20240512082858.1806694-1-quic_devipriy@xxxxxxxxxxx/

Thanks & Regards,
S.Devi Priya

Thanks,
S.Devi Priya

In v2, I've had some issues regarding the dt schema checks. For
transparency, I used the following test invocations to test:

       make dt_binding_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml        make dtbs_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml

Changes since v3:
  - "const"ify .hw.init fields for the PCIE pipe clocks
  - Used pciephy_v5_regs_layout instead of v4 in phy-qcom-qmp-pcie.c
  - Included Manivannan's patch for qcom-pcie.c clocks
  - Dropped redundant comments in "ranges" and "interrupt-map" of pcie2.
  - Added pcie3 and pcie3_phy dts nodes
  - Moved snoc and anoc clocks to PCIe controller from PHY

Changes since v2:
  - reworked resets in qcom,pcie.yaml to resolve dt schema errors
  - constrained "reg" in qcom,pcie.yaml
  - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml
  - dropped msi-parent for pcie node, as it is handled by "msi" IRQ

Changes since v1:
  - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex numbers   - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of clocks
  - reorganized qcom,pcie.yaml to include clocks+resets per compatible
  - Renamed "pcie2_qmp_phy" label to "pcie2_phy"
  - moved "ranges" property of pcie@20000000 higher up

Alexandru Gagniuc (7):
   dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574
   clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
   dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
   PCI: qcom: Add support for IPQ9574
   dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
   phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY
   arm64: dts: qcom: ipq9574: add PCIe2 and PCIe3 nodes

Manivannan Sadhasivam (1):
   PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks
     from Devicetree

  .../devicetree/bindings/pci/qcom,pcie.yaml    |  37 ++++
  .../phy/qcom,ipq8074-qmp-pcie-phy.yaml        |   1 +
  arch/arm64/boot/dts/qcom/ipq9574.dtsi         | 178 +++++++++++++++++-
  drivers/clk/qcom/gcc-ipq9574.c                |  76 ++++++++
  drivers/pci/controller/dwc/pcie-qcom.c        | 164 +++-------------
  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 136 ++++++++++++-
  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   |  14 ++
  include/dt-bindings/clock/qcom,ipq9574-gcc.h  |   4 +
  8 files changed, 469 insertions(+), 141 deletions(-)





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux