Linux ARM MSM

• Thread Index

• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sc8280xp-crd: Add PMIC die-temp vadc channels
  • From: Bjorn Andersson via B4 Relay <devnull+quic_bjorande.quicinc.com@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sc8280xp-pmics: Define adc for temp-alarms
  • From: Bjorn Andersson via B4 Relay <devnull+quic_bjorande.quicinc.com@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: sc8280xp: Make pmic thermal-zones report temperature
  • From: Bjorn Andersson via B4 Relay <devnull+quic_bjorande.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 19/19] drm/msm/dp: allow YUV420 mode for DP connector when CDM available
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 19/19] drm/msm/dp: allow YUV420 mode for DP connector when CDM available
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: dts: qcom: msm8226: Sort and clean up nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/3] pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/3] pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: display/msm: gpu: Allow multiple digits for patchid
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v2 3/3] PCI: qcom: properly implement RC shutdown/power up
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/3] PCI: qcom: Read back PARF_LTSSM register
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/3] PCI: qcom: reshuffle reset logic in 2_7_0 .init
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 0/3] Qualcomm PCIe RC shutdown & reinit
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/2] drm/msm/adreno: Add A305B support
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH v3] ARM: dts: qcom: msm8974: correct qfprom node size
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 3/3] pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 2/3] pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 0/3] Add RPMPD support for MSM8974
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: power: rpmpd: Add MSM8974 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 2/3] pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: qcom: msm8226: Sort and clean up nodes
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH v2 0/3] Bring up more CPU cores on MSM8226
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [net-next PATCH v7 00/10] net: phy: Introduce PHY Package concept
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 3/3] pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/3] pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/3] pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: power: rpmpd: Add MSM8974 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/3] pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 0/3] Add RPMPD support for MSM8974
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH 14/22] platform/chrome: cros_typec_switch: Add support for signaling HPD to drm_bridge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 21/22] arm64: dts: qcom: sc7180-trogdor: Make clamshell/detachable fragments
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 20/22] arm64: dts: qcom: sc7180: pazquel: Add missing comment header
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 19/22] arm64: dts: qcom: sc7180: quackingstick: Disable instead of delete usb_c1
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 19/19] drm/msm/dp: allow YUV420 mode for DP connector when CDM available
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 18/19] drm/msm/dpu: reserve CDM blocks for DP if mode is YUV420
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 03/22] dt-bindings: usb: Add downstream facing ports to realtek binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 17/19] drm/msm/dpu: modify timing engine programming for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 14/19] drm/msm/dpu: add support of new peripheral flush mechanism
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 12/19] drm/msm/dp: move parity calculation to dp_utils
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 11/19] drm/msm/dp: change clock related programming for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/19] drm/msm/dp: add an API to indicate if sink supports VSC SDP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 10/19] drm/msm/dp: program config ctrl for YUV420 over DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 08/19] drm/msm/dp: check if VSC SDP is supported in DP programming
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/19] drm/msm/dpu: allow dpu_encoder_helper_phys_setup_cdm to work for DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/19] drm/msm/dpu: pass mode dimensions instead of fb size in CDM setup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 02/19] drm/msm/dp: add an API to indicate if sink supports VSC SDP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 01/19] drm/msm/dpu: allow certain formats for CDM for DP
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 22/22] arm64: dts: qcom: sc7180-trogdor: Wire up USB and DP to usb-c-connectors
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 21/22] arm64: dts: qcom: sc7180-trogdor: Make clamshell/detachable fragments
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 20/22] arm64: dts: qcom: sc7180: pazquel: Add missing comment header
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 19/22] arm64: dts: qcom: sc7180: quackingstick: Disable instead of delete usb_c1
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 18/22] dt-bindings: chrome: Add binding for ChromeOS Pogo pin connector
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 17/22] platform/chrome: cros_typec_switch: Handle lack of HPD information
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 16/22] platform/chrome: cros_typec_switch: Support orientation-switch
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 15/22] platform/chrome: cros_typec_switch: Support DP muxing via DRM lane assignment
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 14/22] platform/chrome: cros_typec_switch: Add support for signaling HPD to drm_bridge
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 13/22] dt-bindings: chrome: Add google,cros-ec-typec-switch binding
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 12/22] platform/chrome: cros_typec_switch: Use dev_err_probe()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 11/22] platform/chrome: cros_typec_switch: Use fwnode instead of ACPI APIs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 10/22] platform/chrome: cros_typec_switch: Move port creation code to sub-function
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 09/22] platform/chrome: cros_typec_switch: Use read_poll_timeout helper
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 08/22] platform/chrome: cros_ec_typec: Purge blocking switch devlinks
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 07/22] device property: Add remote endpoint to devcon matcher
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 06/22] drm/bridge: Verify lane assignment is going to work during atomic_check
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 05/22] drm/atomic-helper: Introduce lane remapping support to bridges
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 04/22] usb: core: Set connect_type of ports based on DT node
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 03/22] dt-bindings: usb: Add downstream facing ports to realtek binding
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 02/22] gpio: Add ChromeOS EC GPIO driver
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 01/22] dt-bindings: gpio: Add binding for ChromeOS EC GPIO controller
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 00/22] platform/chrome: Add DT USB/DP muxing/topology to Trogdor
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 07/19] power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Update bouncing @codeaurora addresses
  • From: Ritesh Harjani <ritesh.list@xxxxxxxxx>
• [PATCH v2 10/19] drm/msm/dp: program config ctrl for YUV420 over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 02/19] drm/msm/dp: add an API to indicate if sink supports VSC SDP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 00/19] Add support for CDM over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 16/19] drm/msm/dpu: modify encoder programming for CDM over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 18/19] drm/msm/dpu: reserve CDM blocks for DP if mode is YUV420
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 19/19] drm/msm/dp: allow YUV420 mode for DP connector when CDM available
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 17/19] drm/msm/dpu: modify timing engine programming for YUV420 over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 15/19] drm/msm/dp: enable SDP and SDE periph flush update
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 13/19] drm/msm/dp: add VSC SDP support for YUV420 over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 14/19] drm/msm/dpu: add support of new peripheral flush mechanism
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 12/19] drm/msm/dp: move parity calculation to dp_utils
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 11/19] drm/msm/dp: change clock related programming for YUV420 over DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 01/19] drm/msm/dpu: allow certain formats for CDM for DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 06/19] drm/msm/dp: rename wide_bus_en to wide_bus_supported
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 04/19] drm/msm/dpu: allow dpu_encoder_helper_phys_setup_cdm to work for DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 09/19] drm/msm/dpu: move widebus logic to its own API
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 05/19] drm/msm/dpu: move dpu_encoder_helper_phys_setup_cdm to dpu_encoder
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 08/19] drm/msm/dp: check if VSC SDP is supported in DP programming
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 07/19] drm/msm/dp: store mode YUV420 information to be used by rest of DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v2 03/19] drm/msm/dpu: pass mode dimensions instead of fb size in CDM setup
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [net-next PATCH v7 08/10] net: phy: qcom: move common qca808x LED define to shared header
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v7 07/10] net: phy: qcom: add support for QCA807x PHY Family
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [net-next PATCH v7 06/10] net: phy: provide whether link has changed in c37_read_status
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v7 05/10] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v7 04/10] net: phy: qcom: move more function to shared library
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v7 03/10] net: phy: add devm/of_phy_package_join helper
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v7 02/10] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2] soc: qcom: llcc: Check return value on Broadcast_OR reg read
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH] Documentation: embargoed-hardware-issues.rst: Fix Trilok's email
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v14 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: [RFC 9/9] PCI/pwrctl: add a PCI power control driver for power sequenced devices
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/6] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH RESEND 5/5] drm/msm/mdp5: drop global_state_lock
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v14 45/53] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RESEND 4/5] drm/msm/mdp5: migrate SMP dumping to using atomic_print_state
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 4/8] arm64: dts: qcom: msm8996: specify UFS core_clk frequencies
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: msm8996: set GCC_UFS_ICE_CORE_CLK freq directly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: msm8996: set GCC_UFS_ICE_CORE_CLK freq directly
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/8] arm64: dts: qcom: msm8996: add second UFS RX lane on MSM8996 platform
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/8] arm64: dts: qcom: msm8996: specify UFS core_clk frequencies
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH RESEND 3/5] drm/msm/dpu: drop global_state_lock
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 3/8] arm64: dts: qcom: msm8996: unbreak UFS HCD support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/8] scsi: ufs: qcom: provide default cycles_in_1us value
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iommu/arm-smmu: Convert to domain_alloc_paging()
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• [PATCH 8/8] arm64: dts: qcom: msm8996: drop source clock entries from the UFS node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 7/8] dt-bindings: ufs: qcom,ufs: drop source clock entries
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/8] arm64: dts: qcom: msm8996: unbreak UFS HCD support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/8] arm64: dts: qcom: msm8996: set GCC_UFS_ICE_CORE_CLK freq directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/8] arm64: dts: qcom: msm8996: add second UFS RX lane on MSM8996 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/8] arm64: dts: qcom: msm8996: specify UFS core_clk frequencies
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/8] scsi: ufs: qcom: provide default cycles_in_1us value
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/8] dt-bindings: ufs: qcom,ufs: add second RX lane on MSM8996 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/8] scsi: ufs: qcom: fix UFSDHCD support on MSM8996 platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: qcom: msm8976: Add WCNSS node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v14 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 6/8] arm64: dts: qcom: msm8976: Add Adreno GPU
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/8] arm64: dts: qcom: msm8976: Add MDSS nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: x1e80100-crd: add sound card
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 6/6] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: aim300: Enable PCIe0 for WLAN
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 00/20] Venus cleanups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 20/20] media: venus: pm_helpers: Use reset_bulk API
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 19/20] media: venus: pm_helpers: Commonize venc_get()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 18/20] media: venus: pm_helpers: Commonize vdec_get()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 17/20] media: venus: pm_helpers: Commonize getting clocks and GenPDs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 16/20] media: venus: pm_helpers: Simplify vcodec clock handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 15/20] media: venus: core: Define a pointer to core->res
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 14/20] media: venus: pm_helpers: Remove pm_ops->core_put
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 12/20] media: venus: core: Remove cp_start
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 13/20] media: venus: pm_helpers: Commonize core_power
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 11/20] media: venus: core: Use GENMASK for dma_mask
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 10/20] media: venus: core: Drop cache properties in resource struct
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 09/20] media: venus: core: Get rid of vcodec_num
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 08/20] media: venus: core: Deduplicate OPP genpd names
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 07/20] media: venus: core: Constify all members of the resource struct
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 06/20] media: venus: pm_helpers: Move reset acquisition to common code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/20] media: venus: pm_helpers: Kill dead code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/20] media: venus: core: Set OPP clkname in a common code path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/20] media: venus: pm_helpers: Add kerneldoc to venus_clks_get()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/20] media: venus: pm_helpers: Rename core_clks_get to venus_clks_get
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/20] media: venus: pm_helpers: Only set rate of the core clock in core_clks_enable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/20] Venus cleanups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/20] media: venus: pm_helpers: Kill dead code
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/20] media: venus: core: Set OPP clkname in a common code path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/20] media: venus: pm_helpers: Add kerneldoc to venus_clks_get()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/20] media: venus: pm_helpers: Rename core_clks_get to venus_clks_get
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/20] media: venus: pm_helpers: Only set rate of the core clock in core_clks_enable
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/20] Venus cleanups
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v14 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v14 01/53] xhci: fix possible null pointer dereference at secondary interrupter removal
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: msm8996: Add missing UFS host controller reset
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iommu/arm-smmu: Convert to domain_alloc_paging()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RESEND 2/5] drm/msm/dpu: finalise global state object
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4 1/5] drm/msm/dpu: split irq_control into irq_enable and _disable
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH v4 3/5] drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH v4 2/5] drm/msm/dpu: split _dpu_encoder_resource_control_helper()
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH v4 5/5] drm/msm/dpu: drop dpu_encoder_phys_ops::atomic_check()
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH 00/18] perf: Convert to platform remove callback returning void
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] firmware: qcom_scm: Introduce batching of hyp assign calls
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: (subset) [PATCH 0/2] Correcting the voltage setting for vph_pwr
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update bouncing @codeaurora addresses
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Update bouncing @codeaurora addresses
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: Add support for SMB2360
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: Add support for SMB2360
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 0/2] phy: qcom: eusb2-repeater: Add support for SMB2360
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for SMB2360
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] media: v4l2-ctrls: add encoder maximum bitrate control
  • From: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/6] interconnect: qcom: constify things
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] firmware: qcom_scm: Introduce batching of hyp assign calls
  • From: Dibakar Singh <quic_dibasing@xxxxxxxxxxx>
• Re: [PATCH v14 45/53] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v14 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v14 41/53] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v14 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v14 01/53] xhci: fix possible null pointer dereference at secondary interrupter removal
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14 00/53] Introduce QC USB SND audio offloading support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 11/19] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH net-next v13 2/2] net: stmmac: Add driver support for common safety IRQ
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• [PATCH net-next v13 1/2] dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• [PATCH net-next v13 0/2] Ethernet common fault IRQ support
  • From: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
• Re: [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: display: panel-simple-dsi: add s6e3fa7 ams559nk06 compat
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v14 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v14 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sdm670-google-sargo: add panel
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: display: panel-simple-dsi: add s6e3fa7 ams559nk06 compat
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH 0/3] drm/panel: Pixel 3a Panel
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v14 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v14 00/53] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 15/17] drm/msm/dpu: allow certain formats for CDM for DP
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH v4 4/5] drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• [PATCH v14 36/53] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 33/53] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 31/53] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 12/53] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 52/53] ASoC: qcom: Populate SoC components string
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 53/53] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 15/53] xhci: export XHCI IMOD setting helper for interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 13/53] usb: host: xhci: Export enable and disable interrupter APIs
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 26/53] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 47/53] ASoC: usb: Fetch ASoC sound card information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 30/53] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 49/53] ALSA: usb-audio: qcom: Use card and PCM index from QMI request
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 44/53] ASoC: qcom: qdsp6: Add PCM ops to track current state
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 16/53] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 51/53] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 41/53] ASoC: Introduce SND kcontrols to select sound card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 45/53] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 46/53] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 42/53] ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 39/53] ALSA: usb-audio: qcom: Populate PCM and USB chip information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 09/53] xhci: add helper that checks for unhandled events on a event ring
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v14 43/53] ASoC: Add SND kcontrol for fetching USB offload status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 34/53] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 24/53] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 37/53] ASoC: dt-bindings: Add Q6USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 10/53] xhci: Don't check if the event ring is valid before every event TRB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 07/53] xhci: update event ring dequeue pointer position to controller correctly
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 00/53] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 11/53] xhci: Decouple handling an event from checking for unhandled events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 21/53] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 14/53] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 38/53] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 06/53] xhci: remove unnecessary event_ring_deq parameter from xhci_handle_event()
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 17/53] usb: host: xhci-sideband: Expose a sideband interrupter enable API
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 05/53] xhci: make isoc_bei_interval variable interrupter specific.
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 40/53] ASoC: qcom: qdsp6: Add support to track available USB PCM devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 28/53] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 18/53] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 03/53] xhci: Add interrupt pending autoclear flag to each interrupter
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 04/53] xhci: Add helper to set an interrupters interrupt moderation interval
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 01/53] xhci: fix possible null pointer dereference at secondary interrupter removal
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 22/53] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 27/53] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 19/53] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 23/53] ASoC: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 20/53] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 29/53] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 08/53] xhci: move event processing for one interrupter to a separate function
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 02/53] xhci: fix off by one check when adding a secondary interrupter.
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v14 25/53] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 12/17] drm/msm/dpu: add support of new peripheral flush mechanism
  • From: Paloma Arellano <quic_parellan@xxxxxxxxxxx>
• Re: [PATCH 0/6] interconnect: qcom: constify things
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH] bus: mhi: ep: make mhi_ep_bus_type const
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• [PATCH] bus: mhi: ep: make mhi_ep_bus_type const
  • From: "Ricardo B. Marliere" <ricardo@xxxxxxxxxxxx>
• Re: [PATCH v4 4/5] drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v4] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• [PATCH v3 19/19] power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 12/19] power: reset: msm-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 18/19] power: reset: syscon-poweroff: Move device data into a struct
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 15/19] power: reset: as3722-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 17/19] power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 00/19] Remove pm_power_off use in drivers/power/reset
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 02/19] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 16/19] power: reset: gemini-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 13/19] power: reset: msm-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 07/19] power: reset: brcm-kona-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 14/19] power: reset: regulator-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 03/19] power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 08/19] power: reset: axxia-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 11/19] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 05/19] power: reset: tps65086-restart: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 10/19] power: reset: rmobile-reset: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 01/19] power: reset: atc260x-poweroff: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 04/19] power: reset: xgene-reboot: Use devm_register_sys_off_handler(RESTART)
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 09/19] power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 06/19] power: reset: tps65086-restart: Remove unneeded device data struct
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 3/5] drm/msm: mdss: Add X1E80100 support
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH] clk: constify the of_phandle_args argument of of_clk_provider
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4] drm/msm/dsi: Document DSC related pclk_rate and hdisplay calculations
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 5/5] drm/msm/dpu: drop dpu_encoder_phys_ops::atomic_check()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/5] drm/msm/dpu: split _dpu_encoder_resource_control_helper()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/5] drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/5] drm/msm/dpu: split irq_control into irq_enable and _disable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/5] drm/msm/dpu: remove dpu_encoder_phys_ops::atomic_mode_set callback
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/5] drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/4] drm/msm/dpu: add support for SDM660 and SDM630 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 3/4] drm/msm: add a kernel param to select between MDP5 and DPU drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 1/4] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 0/4] drm/msm: provide migration path from MDP5 to DPU driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v2] drm/msm/dpu: make "vblank timeout" more useful
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 3/5] drm/msm: mdss: Add X1E80100 support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 3/5] drm/msm: mdss: Add X1E80100 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] drm/msm: mdss: Add X1E80100 support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH] arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v3 3/6] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• Re: (subset) [PATCH v5] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 3/6] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v1] soc: qcom: mdt_loader: Add Upperbounds check for program header access
  • From: Auditya Bhattaram <quic_audityab@xxxxxxxxxxx>
• Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH net-next v4] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII
  • From: Sneh Shah <quic_snehshah@xxxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: minor whitespace cleanup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: minor whitespace cleanup
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 6/6] interconnect: qcom: x1e80100: constify pointer to qcom_icc_bcm
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/6] interconnect: qcom: sa8775p: constify pointer to qcom_icc_bcm
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/6] interconnect: qcom: sm6115: constify pointer to qcom_icc_node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/6] interconnect: qcom: sm8250: constify pointer to qcom_icc_node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] interconnect: qcom: sa8775p: constify pointer to qcom_icc_node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/6] interconnect: qcom: msm8909: constify pointer to qcom_icc_node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/6] interconnect: qcom: constify things
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [V3] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: ucsi: Add qcm6490-pmic-glink as needing PDOS quirk
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/2] Fairphone 5 PMIC-GLINK support (USB-C, charger, fuel gauge)
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 3/5] dt-bindings: clock: qcom: Add SM8650 camera clock controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: clock: qcom: Add video clock bindings for SM8650
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: "Aiqun Yu (Maria)" <quic_aiquny@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: camcc-sc7280: Add parent dependency to all camera GDSCs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/5] clk: qcom: sc7280: Update the transition delay for GDSC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: lpassaudiocc-sc7280: Add support to skip PLL configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: Update protected clocks list for qcm6490 variants
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 4/5] clk: qcom: camcc-sc7280: Add parent dependency to all camera GDSCs
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 3/5] clk: qcom: sc7280: Update the transition delay for GDSC
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 2/5] clk: qcom: lpassaudiocc-sc7280: Add support to skip PLL configuration
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 1/5] bindings: clock: qcom: Add "qcom,adsp-skip-pll" property
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 0/5] Add updates for clock controllers to support QCM6490
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: qcom: gcc-sm8150: Add gcc_parents_0_ao support
  • From: "Satya Priya Kakitapalli (Temp)" <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 00/46] Dynamic allocation of reserved_mem array.
  • From: Oreoluwa Babatunde <quic_obabatun@xxxxxxxxxxx>
• [pull] drm/msm: drm-msm-fixes-2024-02-07 for v6.8-rc4
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v3 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [no subject]
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v3 4/4] drm/msm/dpu: add support for SDM660 and SDM630 platforms
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PULL]: qcom: SC7180 venus firmware update
  • From: Nathan Hebert <nhebert@xxxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: remove CRTC frame event callback registration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/4] drm/msm: add a kernel param to select between MDP5 and DPU drivers
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] drm/msm/dpu: support binding to the mdp5 devices
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• [PATCH v3 00/32] spi: get rid of some legacy macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 20/32] spi: geni-qcom: Follow renaming of SPI "master" to "controller"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Re: [PATCH v2] net: stmmac: dwmac-qcom-ethqos: Enable TBS on all queues but 0
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v2] net: stmmac: dwmac-qcom-ethqos: Enable TBS on all queues but 0
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v3 1/4] drm/msm/mdss: generate MDSS data for MDP5 platforms
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] net: stmmac: dwmac-qcom-ethqos: Enable TBS on all queues but 0
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2] bus: mhi: host: free buffer on error in mhi_alloc_bhie_table
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dpu: remove CRTC frame event callback registration
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v2] net: stmmac: dwmac-qcom-ethqos: Enable TBS on all queues but 0
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Re: Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: Re: [RFC 8/9] PCI/pwrctl: add PCI power control core code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] remoteproc: qcom: Add NOTIFY_FATAL event type to SSR subdevice
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: (subset) [PATCH v3 00/17] Fix Qcom UFS PHY clocks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: (subset) [PATCH v2 00/16] Fix Qcom UFS PHY clocks
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4] phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2] bus: mhi: host: free buffer on error in mhi_alloc_bhie_table
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: camcc-sm8650: Add camera clock controller driver for SM8650
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 03/18] clk: qcom: reset: Ensure write completion on reset de/assertion
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 0/2] Correcting the voltage setting for vph_pwr
  • From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp-x13s: correct analogue microphone route
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4] pinctrl: Add lock to ensure the state atomization
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: free buffer on error in mhi_alloc_bhie_table
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/6] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 02/16] misc: fastrpc: Add support for unsigned PD
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 00/16] Add missing features to FastRPC driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/3] Fairphone 5 PMIC-GLINK support (USB-C, charger, fuel gauge)
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v2 03/18] clk: qcom: reset: Ensure write completion on reset de/assertion
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v1 02/16] misc: fastrpc: Add support for unsigned PD
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: x1e80100-crd: add sound card
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 00/16] Add missing features to FastRPC driver
  • From: Ekansh Gupta <quic_ekangupt@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 4/5] clk: qcom: camcc-sm8650: Add camera clock controller driver for SM8650
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: [PATCH v13 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH] bus: mhi: host: free buffer on error in mhi_alloc_bhie_table
  • From: Fedor Pchelkin <pchelkin@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq9574: Enable Inline Crypto Engine for MMC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sc7280: Update domain-idle-states for cluster sleep
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: Add dma-coherent property on
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add PM8010 regulators for sm8650 boards.
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add PM8010 regulators for sm8650 boards.
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v7 0/4] remoteproc: qcom: Introduce DSP support for SM8650
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8550-hdk: correct WCD9385 route and port mapping
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] arm64: qcom: sm8650: enable Audio on MTP and QRD
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] arm64: dts: qcom: ipq6018: support thermal sensors
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v3 00/17] Fix Qcom UFS PHY clocks
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/3] Add MDSS_BCR reset (+some more) for MSM8953
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RFC 0/2] Add GPU support to MSM8953 SoC
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm6350: Add tsens thermal zones
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: ipq6018: add QUP5 I2C node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH 1/4] arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/4] arm64: dts: qcom: x1e80100: audio support components
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: x1e80100: add ADSP pieces
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 00/18] Qualcomm GCC/VIDEOCC reset overhaul for Venus
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] phy: qcom: qmp-usbc: properly handle the clamping register
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: qcom: drop 32-bit machine Kconfig entries
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 0/4] clk: qcom: use module_platform_driver() to register drivers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v6 00/11] arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v5 00/11] arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: (subset) [PATCH v4 00/10] clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add configurations for gpio-keys
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2] net: stmmac: dwmac-qcom-ethqos: Enable TBS on all queues but 0
  • From: Abhishek Chauhan <quic_abchauha@xxxxxxxxxxx>
• Re: Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH RFC 2/2] spmi: pmic-arb: Add support for multi-master
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH RFC 1/2] spmi: Add support for multi-master
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH RFC 0/2] spmi: Add multi master support
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• Re: [PATCH v1] TSO and TBS cannot co-exist. TBS requires special descriptor to be allocated at bootup. Initialising Tx queues at probe to support TSO and TBS can help in allocating those resources at bootup.
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 0/3] Fairphone 5 PMIC-GLINK support (USB-C, charger, fuel gauge)
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v3 06/10] clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: arm: qcom: drop the superfluous device compatibility schema
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v1] TSO and TBS cannot co-exist. TBS requires special descriptor to be allocated at bootup. Initialising Tx queues at probe to support TSO and TBS can help in allocating those resources at bootup.
  • From: Abhishek Chauhan <quic_abchauha@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] LLCC: Support for Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/5] LLCC: Support for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH 1/8] arm64: dts: qcom: msm8976: Add IOMMU nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: qcom: videocc-*: switch to module_platform_driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/4] clk: qcom: gpucc-*: switch to module_platform_driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] clk: qcom: dispcc-*: switch to module_platform_driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] clk: qcom: camcc-*: switch to module_platform_driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: defconfig: enable audio drivers for SM8650 QRD board
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 10/10] clk: qcom: Add camcc clock driver for x1e80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 08/10] clk: qcom: Add GPU clock driver for x1e80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 07/10] clk: qcom: Add dispcc clock driver for x1e80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/6] arm64: dts: qcom: msm8956-loire: Add usb vbus and id extcons to ci-hdrc
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/6] arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 18/18] clk: qcom: videocc-sm8550: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 17/18] clk: qcom: videocc-sm8450: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 16/18] clk: qcom: videocc-sm8350: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 15/18] clk: qcom: videocc-sm8250: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 14/18] clk: qcom: videocc-sm8150: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 13/18] clk: qcom: gcc-sm8650: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 12/18] clk: qcom: gcc-sm8550: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 11/18] clk: qcom: gcc-sm8450: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 10/18] clk: qcom: gcc-sm8350: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 09/18] clk: qcom: gcc-sm8250: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 08/18] clk: qcom: gcc-sm7150: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 07/18] clk: qcom: gcc-sm4450: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 06/18] clk: qcom: gcc-sc8280xp: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 05/18] clk: qcom: gcc-sc8180x: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 04/18] clk: qcom: gcc-sa8775p: Set delay for Venus CLK resets
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 03/18] clk: qcom: reset: Ensure write completion on reset de/assertion
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 01/18] clk: qcom: reset: Increase max reset delay
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 02/18] clk: qcom: reset: Commonize the de/assert functions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 00/18] Qualcomm GCC/VIDEOCC reset overhaul for Venus
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register region
  • From: Rob Herring <robh@xxxxxxxxxx>
• [net-next PATCH v7 10/10] net: phy: qca807x: add support for configurable LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 09/10] net: phy: qcom: generalize some qca808x LED functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 08/10] net: phy: qcom: move common qca808x LED define to shared header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 07/10] net: phy: qcom: add support for QCA807x PHY Family
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 06/10] net: phy: provide whether link has changed in c37_read_status
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 05/10] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 04/10] net: phy: qcom: move more function to shared library
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 03/10] net: phy: add devm/of_phy_package_join helper
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 02/10] net: phy: add support for scanning PHY in PHY packages nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 01/10] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 00/10] net: phy: Introduce PHY Package concept
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v6 05/10] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next PATCH v6 05/10] dt-bindings: net: Document Qcom QCA807x PHY package
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 4/4] clk: qcom: videocc-*: switch to module_platform_driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/4] clk: qcom: gpucc-*: switch to module_platform_driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/4] clk: qcom: camcc-*: switch to module_platform_driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/4] clk: qcom: dispcc-*: switch to module_platform_driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/4] clk: qcom: use module_platform_driver() to register drivers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v13 32/53] ALSA: usb-audio: Check for support for requested audio format
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v13 35/53] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v13 50/53] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v13 48/53] ALSA: usb-audio: mixer: Add USB offloading mixer control
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Naman Jain <quic_namajain@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/5] clk: qcom: camcc-sm8650: Add camera clock controller driver for SM8650
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/15] qcom_scm: scm call for create, prepare and import keys
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [PATCH v4 02/15] qcom_scm: scm call for deriving a software secret
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/3] Add DT support for Multiport controller on SC8280XP
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v4 01/15] ice, ufs, mmc: use blk_crypto_key for program_key
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• [PATCH 4/5] clk: qcom: camcc-sm8650: Add camera clock controller driver for SM8650
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: sm8650: Add video and camera clock controllers
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 3/5] dt-bindings: clock: qcom: Add SM8650 camera clock controller
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 2/5] clk: qcom: videocc-sm8550: Add support for SM8650 videocc
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: clock: qcom: Add video clock bindings for SM8650
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• [PATCH 0/5] Add support for videocc and camcc on SM8650
  • From: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
• Re: Re: [PATCH v4 1/3] dt-bindings: HID: i2c-hid: Document reset-related properties
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2 18/19] power: reset: syscon-poweroff: Move device data into a struct
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 19/19] power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v2 11/19] power: reset: mt6323-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Add support for QoS configuration
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 0/5] LLCC: Support for Broadcast_AND region
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati PSSNV <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: msm: qcom,mdss: Include ommited fam-b compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: msm: qcom,mdss: Include ommited fam-b compatible
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: qcom: sm8550: Add mapping to llcc Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2 0/5] LLCC: Support for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: qcom: sm8650: Add mapping to llcc Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: arm: msm: Add llcc Broadcast_AND register region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2 2/5] arm64: dts: qcom: sm8450: Add mapping to llcc Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• [PATCH v2 5/5] soc: qcom: llcc: Add regmap for Broadcast_AND region
  • From: Unnathi Chalicheemala <quic_uchalich@xxxxxxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v11] bus: mhi: host: Add tracing support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcm6490-idp: Add configurations for gpio-keys
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v14 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v14 0/9] Add multiport support for DWC3 controllers
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>