On 3/18/2024 1:20 PM, Krzysztof Kozlowski wrote:
On 18/03/2024 06:35, Taniya Das wrote:
On the QCM6490 boards the LPASS firmware controls the complete clock
controller functionalities. But the LPASS resets are required to be from
the high level OS for the LPASS SW driver could assert/deassert the
audio resets.
Fixes: a9dd26639d05 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7280")
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
drivers/clk/qcom/lpassaudiocc-sc7280.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
index c43d0b1af7f7..d68139762a80 100644
--- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
+++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/clk-provider.h>
@@ -721,6 +722,7 @@ static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
{ .compatible = "qcom,sc7280-lpassaudiocc" },
+ { .compatible = "qcom,qcm6490-lpassaudiocc" },
Why q is after s? Really, keep the order.
{ }
};
MODULE_DEVICE_TABLE(of, lpass_audio_cc_sc7280_match_table);
@@ -752,6 +754,13 @@ static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,qcm6490-lpassaudiocc")) {
This does not scale. Use match data.
+ ret = qcom_cc_probe_by_index(pdev, 1, &lpass_audio_cc_reset_sc7280_desc);
No, qcm6490 does not have two IO maps, according to your binding.
In the next patch I am separating out the reset functionality from the
rest of the code.
Hope that will simplify the board requirement.
Best regards,
Krzysztof
--
Thanks & Regards,
Taniya Das.
