[PATCH 0/4] Update LPASS Audio clock driver for QCM6490 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series updates the low pass audio clock controller driver for reset
functionality. The patches are split from the below series.
https://lore.kernel.org/all/20240318053555.20405-1-quic_tdas@xxxxxxxxxxx/

The QCM6490 board requires only the reset functionality from the LPASS
subsystem. Thus separate out the driver probe to provide the same on the
QCM6490 boards.

Taniya Das (4):
  dt-bindings: clock: qcom: Add compatible for QCM6490 boards
  clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for
    QCM6490
  arm64: dts: qcom: qcm6490-idp: Update protected clocks list
  arm64: dts: qcom: qcs6490-rb3gen2: Update the LPASS audio node

 .../clock/qcom,sc7280-lpasscorecc.yaml        |  1 +
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts      | 28 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  |  7 ++++-
 drivers/clk/qcom/lpassaudiocc-sc7280.c        | 28 +++++++++++++++++++
 4 files changed, 62 insertions(+), 2 deletions(-)

--
2.17.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux