Re: [PATCH V3 7/8] clk: qcom: Add GPUCC driver support for SM4450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Dmitry Baryshkov (2024-05-28 06:23:27)
> On Tue, May 28, 2024 at 05:12:53PM +0530, Ajit Pandey wrote:
> > Add Graphics Clock Controller (GPUCC) support for SM4450 platform.
> > 
> > Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx>
> > ---
> >  drivers/clk/qcom/Kconfig        |   9 +
> >  drivers/clk/qcom/Makefile       |   1 +
> >  drivers/clk/qcom/gpucc-sm4450.c | 805 ++++++++++++++++++++++++++++++++
> >  3 files changed, 815 insertions(+)
> >  create mode 100644 drivers/clk/qcom/gpucc-sm4450.c
> 
> [trimmed]
> 
> > +
> > +     /* Keep some clocks always enabled */
> > +     qcom_branch_set_clk_en(regmap, 0x93a4); /* GPU_CC_CB_CLK */
> > +     qcom_branch_set_clk_en(regmap, 0x9004); /* GPU_CC_CXO_AON_CLK */
> > +     qcom_branch_set_clk_en(regmap, 0x900c); /* GPU_CC_DEMET_CLK */
> 
> I pinged Stephen regarding these clocks. LGTM otherwise.
> 

Looks OK to me. I assume that these clks don't get turned off when the
GPU power domain is turned off. If that's the case then presumably we
would need to turn these on and off during power transitions.





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux