On Fri May 31, 2024 at 11:28 AM CEST, Taniya Das wrote: > > > On 3/18/2024 12:41 PM, Luca Weiss wrote: > > On Mon Mar 18, 2024 at 6:35 AM CET, Taniya Das wrote: > >> Add the new QCM6490 compatible to support the reset functionality for > >> Low Power Audio subsystem. > >> > >> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx> > >> --- > >> .../devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml | 1 + > >> 1 file changed, 1 insertion(+) > >> > >> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml > >> index deee5423d66e..861b41933525 100644 > >> --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml > >> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml > >> @@ -30,6 +30,7 @@ properties: > >> - qcom,sc7280-lpassaudiocc > >> - qcom,sc7280-lpasscorecc > >> - qcom,sc7280-lpasshm > >> + - qcom,qcm6490-lpassaudiocc > > > > So QCM6490 and SM7325 and SC7280 with non-CrOS firmware (maybe some WoA > > devices?) are supposed to use qcom,qcm6490-lpassaudiocc then? Is this > > what is intended? > > > > Sorry for the very late response on this thread, On QCM6490-IPD and > QCS690-RB3Gen2 boards, will require only reset functionality for Low > Power Audio subsystem and other clock controller functionality is not > supported from HLOS, as LPASS firmware takes care of it. > Hence added new compatible to support only resets. Hi Taniya, My question was more if the *qcm6490* compatible should then also be used on regular SM7325 devices for example since they'll reuse sc7280.dtsi just like qc[ms]6490. And also Windows-on-ARM SC7280 devices presumably have these clocks locked behind the LPASS firmware so then also such a device would use the qcm6490 compatible? Regards Luca > > > Regards > > Luca > > > >> > >> power-domains: > >> maxItems: 1 > >> -- > >> 2.17.1 > >
