On Tue, May 28, 2024 at 05:12:54PM +0530, Ajit Pandey wrote: > Add device node for camera, display and graphics clock controller on > Qualcomm SM4450 platform. > > Signed-off-by: Ajit Pandey <quic_ajipan@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sm4450.dtsi | 38 ++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi > index 8d75c4f9731c..ef448e13b8a0 100644 > --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi > @@ -4,7 +4,10 @@ > */ > > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/clock/qcom,sm4450-camcc.h> > +#include <dt-bindings/clock/qcom,sm4450-dispcc.h> > #include <dt-bindings/clock/qcom,sm4450-gcc.h> > +#include <dt-bindings/clock/qcom,sm4450-gpucc.h> > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > @@ -388,6 +391,41 @@ gcc: clock-controller@100000 { > <0>; > }; > > + gpucc: clock-controller@3d90000 { > + compatible = "qcom,sm4450-gpucc"; > + reg = <0 0x3d90000 0 0xa000>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_GPU_GPLL0_CLK_SRC>, > + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > + camcc: clock-controller@ade0000 { > + compatible = "qcom,sm4450-camcc"; > + reg = <0x0 0xade0000 0x0 0x20000>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_CAMERA_AHB_CLK>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; Please keep all the nodes sorted using the device address. > + > + dispcc: clock-controller@af00000 { > + compatible = "qcom,sm4450-dispcc"; > + reg = <0 0x0af00000 0 0x20000>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&rpmhcc RPMH_CXO_CLK_A>, > + <&gcc GCC_DISP_AHB_CLK>, > + <&sleep_clk>, > + <0>, > + <0>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > qupv3_id_0: geniqup@ac0000 { > compatible = "qcom,geni-se-qup"; > reg = <0x0 0x00ac0000 0x0 0x2000>; > -- > 2.25.1 > -- With best wishes Dmitry