Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 28, 2024 at 02:28:08PM +0200, Konrad Dybcio wrote:
> 
> 
> On 5/27/24 10:07, Abel Vesa wrote:
> > Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> > for USB only, for now. The DP port will come at a later stage since it
> > uses a retimer.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++
> >   1 file changed, 143 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> > index c5c2895b37c7..2fcc994cbb89 100644
> > --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> > @@ -49,6 +49,101 @@ chosen {
> >   		stdout-path = "serial0:115200n8";
> >   	};
> > +	pmic-glink {
> > +		compatible = "qcom,x1e80100-pmic-glink",
> > +			     "qcom,sm8550-pmic-glink",
> > +			     "qcom,pmic-glink";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> > +				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
> > +				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
> > +
> > +		connector@0 {
> 
> Could you describe them somehow? e.g.

Which reminds me that we should add OF bindings for physical_location
driver.

> 
> 
> /* Left rear port */
> connector @0 {
> 
> 
> There is probably some better terminology to describe the one closer and
> farther away from the user, do as you will..
> 
> For the QCP, they're numbered on the chassis
> 
> Konrad

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux