From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
This adds the power sequencing driver for the PMU modules present on the
Qualcomm WCN Bluetooth and Wifi chipsets. It uses the pwrseq subsystem
and knows how to match the sequencer to the consumer device by verifying
the relevant properties and DT layout.
Tested-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
drivers/power/sequencing/Kconfig | 16 ++
drivers/power/sequencing/Makefile | 2 +
drivers/power/sequencing/pwrseq-qcom-wcn.c | 336 +++++++++++++++++++++++++++++
3 files changed, 354 insertions(+)
diff --git a/drivers/power/sequencing/Kconfig b/drivers/power/sequencing/Kconfig
index ba5732b1dbf8..f969374792f5 100644
--- a/drivers/power/sequencing/Kconfig
+++ b/drivers/power/sequencing/Kconfig
@@ -10,3 +10,19 @@ menuconfig POWER_SEQUENCING
during power-up.
If unsure, say no.
+
+if POWER_SEQUENCING
+
+config POWER_SEQUENCING_QCOM_WCN
+ tristate "Qualcomm WCN family PMU driver"
+ default m if ARCH_QCOM
+ help
+ Say Y here to enable the power sequencing driver for Qualcomm
+ WCN Bluetooth/WLAN chipsets.
+
+ Typically, a package from the Qualcomm WCN family contains the BT
+ and WLAN modules whose power is controlled by the PMU module. As the
+ former two share the power-up sequence which is executed by the PMU,
+ this driver is needed for correct power control.
+
+endif
diff --git a/drivers/power/sequencing/Makefile b/drivers/power/sequencing/Makefile
index dcdf8c0c159e..2eec2df7912d 100644
--- a/drivers/power/sequencing/Makefile
+++ b/drivers/power/sequencing/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_POWER_SEQUENCING) += pwrseq-core.o
pwrseq-core-y := core.o
+
+obj-$(CONFIG_POWER_SEQUENCING_QCOM_WCN) += pwrseq-qcom-wcn.o
diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c
new file mode 100644
index 000000000000..7e6391e1b33f
--- /dev/null
+++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pwrseq/provider.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+struct pwrseq_qcom_wcn_pdata {
+ const char *const *vregs;
+ size_t num_vregs;
+ unsigned int pwup_delay_msec;
+ unsigned int gpio_enable_delay;
+};
+
+struct pwrseq_qcom_wcn_ctx {
+ struct pwrseq_device *pwrseq;
+ struct device_node *of_node;
+ const struct pwrseq_qcom_wcn_pdata *pdata;
+ struct regulator_bulk_data *regs;
+ struct gpio_desc *bt_gpio;
+ struct gpio_desc *wlan_gpio;
+ struct clk *clk;
+ unsigned long last_gpio_enable;
+};
+
+static void pwrseq_qcom_wcn_ensure_gpio_delay(struct pwrseq_qcom_wcn_ctx *ctx)
+{
+ unsigned long diff_jiffies;
+ unsigned int diff_msecs;
+
+ if (!ctx->pdata->gpio_enable_delay)
+ return;
+
+ diff_jiffies = jiffies - ctx->last_gpio_enable;
+ diff_msecs = jiffies_to_msecs(diff_jiffies);
+
+ if (diff_msecs < ctx->pdata->gpio_enable_delay)
+ msleep(ctx->pdata->gpio_enable_delay - diff_msecs);
+}
+
+static int pwrseq_qcom_wcn_vregs_enable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ return regulator_bulk_enable(ctx->pdata->num_vregs, ctx->regs);
+}
+
+static int pwrseq_qcom_wcn_vregs_disable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ return regulator_bulk_disable(ctx->pdata->num_vregs, ctx->regs);
+}
+
+static const struct pwrseq_unit_data pwrseq_qcom_wcn_vregs_unit_data = {
+ .name = "regulators-enable",
+ .enable = pwrseq_qcom_wcn_vregs_enable,
+ .disable = pwrseq_qcom_wcn_vregs_disable,
+};
+
+static int pwrseq_qcom_wcn_clk_enable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ return clk_prepare_enable(ctx->clk);
+}
+
+static int pwrseq_qcom_wcn_clk_disable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ clk_disable_unprepare(ctx->clk);
+
+ return 0;
+}
+
+static const struct pwrseq_unit_data pwrseq_qcom_wcn_clk_unit_data = {
+ .name = "clock-enable",
+ .enable = pwrseq_qcom_wcn_clk_enable,
+ .disable = pwrseq_qcom_wcn_clk_disable,
+};
+
+static const struct pwrseq_unit_data *pwrseq_qcom_wcn_unit_deps[] = {
+ &pwrseq_qcom_wcn_vregs_unit_data,
+ &pwrseq_qcom_wcn_clk_unit_data,
+ NULL
+};
+
+static int pwrseq_qcom_wcn_bt_enable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ pwrseq_qcom_wcn_ensure_gpio_delay(ctx);
+ gpiod_set_value_cansleep(ctx->bt_gpio, 1);
+ ctx->last_gpio_enable = jiffies;
+
+ return 0;
+}
+
+static int pwrseq_qcom_wcn_bt_disable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ gpiod_set_value_cansleep(ctx->bt_gpio, 0);
+
+ return 0;
+}
+
+static const struct pwrseq_unit_data pwrseq_qcom_wcn_bt_unit_data = {
+ .name = "bluetooth-enable",
+ .deps = pwrseq_qcom_wcn_unit_deps,
+ .enable = pwrseq_qcom_wcn_bt_enable,
+ .disable = pwrseq_qcom_wcn_bt_disable,
+};
+
+static int pwrseq_qcom_wcn_wlan_enable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ pwrseq_qcom_wcn_ensure_gpio_delay(ctx);
+ gpiod_set_value_cansleep(ctx->wlan_gpio, 1);
+ ctx->last_gpio_enable = jiffies;
+
+ return 0;
+}
+
+static int pwrseq_qcom_wcn_wlan_disable(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ gpiod_set_value_cansleep(ctx->wlan_gpio, 0);
+
+ return 0;
+}
+
+static const struct pwrseq_unit_data pwrseq_qcom_wcn_wlan_unit_data = {
+ .name = "wlan-enable",
+ .deps = pwrseq_qcom_wcn_unit_deps,
+ .enable = pwrseq_qcom_wcn_wlan_enable,
+ .disable = pwrseq_qcom_wcn_wlan_disable,
+};
+
+static int pwrseq_qcom_wcn_pwup_delay(struct pwrseq_device *pwrseq)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+
+ if (ctx->pdata->pwup_delay_msec)
+ msleep(ctx->pdata->pwup_delay_msec);
+
+ return 0;
+}
+
+static const struct pwrseq_target_data pwrseq_qcom_wcn_bt_target_data = {
+ .name = "bluetooth",
+ .unit = &pwrseq_qcom_wcn_bt_unit_data,
+ .post_enable = pwrseq_qcom_wcn_pwup_delay,
+};
+
+static const struct pwrseq_target_data pwrseq_qcom_wcn_wlan_target_data = {
+ .name = "wlan",
+ .unit = &pwrseq_qcom_wcn_wlan_unit_data,
+ .post_enable = pwrseq_qcom_wcn_pwup_delay,
+};
+
+static const struct pwrseq_target_data *pwrseq_qcom_wcn_targets[] = {
+ &pwrseq_qcom_wcn_bt_target_data,
+ &pwrseq_qcom_wcn_wlan_target_data,
+ NULL
+};
+
+static const char *const pwrseq_qca6390_vregs[] = {
+ "vddio",
+ "vddaon",
+ "vddpmu",
+ "vddrfa0p95",
+ "vddrfa1p3",
+ "vddrfa1p9",
+ "vddpcie1p3",
+ "vddpcie1p9",
+};
+
+static const struct pwrseq_qcom_wcn_pdata pwrseq_qca6390_of_data = {
+ .vregs = pwrseq_qca6390_vregs,
+ .num_vregs = ARRAY_SIZE(pwrseq_qca6390_vregs),
+ .pwup_delay_msec = 60,
+ .gpio_enable_delay = 100,
+};
+
+static const char *const pwrseq_wcn7850_vregs[] = {
+ "vdd",
+ "vddio",
+ "vddio1p2",
+ "vddaon",
+ "vdddig",
+ "vddrfa1p2",
+ "vddrfa1p8",
+};
+
+static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn7850_of_data = {
+ .vregs = pwrseq_wcn7850_vregs,
+ .num_vregs = ARRAY_SIZE(pwrseq_wcn7850_vregs),
+ .pwup_delay_msec = 50,
+};
+
+static int pwrseq_qcom_wcn_match(struct pwrseq_device *pwrseq,
+ struct device *dev)
+{
+ struct pwrseq_qcom_wcn_ctx *ctx = pwrseq_device_get_drvdata(pwrseq);
+ struct device_node *dev_node = dev->of_node;
+
+ /*
+ * The PMU supplies power to the Bluetooth and WLAN modules. both
+ * consume the PMU AON output so check the presence of the
+ * 'vddaon-supply' property and whether it leads us to the right
+ * device.
+ */
+ if (!of_property_present(dev_node, "vddaon-supply"))
+ return 0;
+
+ struct device_node *reg_node __free(device_node) =
+ of_parse_phandle(dev_node, "vddaon-supply", 0);
+ if (!reg_node)
+ return 0;
+
+ /*
+ * `reg_node` is the PMU AON regulator, its parent is the `regulators`
+ * node and finally its grandparent is the PMU device node that we're
+ * looking for.
+ */
+ if (!reg_node->parent || !reg_node->parent->parent ||
+ reg_node->parent->parent != ctx->of_node)
+ return 0;
+
+ return 1;
+}
+
+static int pwrseq_qcom_wcn_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pwrseq_qcom_wcn_ctx *ctx;
+ struct pwrseq_config config;
+ int i, ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->of_node = dev->of_node;
+
+ ctx->pdata = of_device_get_match_data(dev);
+ if (!ctx->pdata)
+ return dev_err_probe(dev, -ENODEV,
+ "Failed to obtain platform data\n");
+
+ ctx->regs = devm_kcalloc(dev, ctx->pdata->num_vregs,
+ sizeof(*ctx->regs), GFP_KERNEL);
+ if (!ctx->regs)
+ return -ENOMEM;
+
+ for (i = 0; i < ctx->pdata->num_vregs; i++)
+ ctx->regs[i].supply = ctx->pdata->vregs[i];
+
+ ret = devm_regulator_bulk_get(dev, ctx->pdata->num_vregs, ctx->regs);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to get all regulators\n");
+
+ ctx->bt_gpio = devm_gpiod_get_optional(dev, "bt-enable", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->bt_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio),
+ "Failed to get the Bluetooth enable GPIO\n");
+
+ ctx->wlan_gpio = devm_gpiod_get_optional(dev, "wlan-enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->wlan_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->wlan_gpio),
+ "Failed to get the WLAN enable GPIO\n");
+
+ ctx->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(ctx->clk))
+ return dev_err_probe(dev, PTR_ERR(ctx->clk),
+ "Failed to get the reference clock\n");
+
+ memset(&config, 0, sizeof(config));
+
+ config.parent = dev;
+ config.owner = THIS_MODULE;
+ config.drvdata = ctx;
+ config.match = pwrseq_qcom_wcn_match;
+ config.targets = pwrseq_qcom_wcn_targets;
+
+ ctx->pwrseq = devm_pwrseq_device_register(dev, &config);
+ if (IS_ERR(ctx->pwrseq))
+ return dev_err_probe(dev, PTR_ERR(ctx->pwrseq),
+ "Failed to register the power sequencer\n");
+
+ return 0;
+}
+
+static const struct of_device_id pwrseq_qcom_wcn_of_match[] = {
+ {
+ .compatible = "qcom,qca6390-pmu",
+ .data = &pwrseq_qca6390_of_data,
+ },
+ {
+ .compatible = "qcom,wcn7850-pmu",
+ .data = &pwrseq_wcn7850_of_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pwrseq_qcom_wcn_of_match);
+
+static struct platform_driver pwrseq_qcom_wcn_driver = {
+ .driver = {
+ .name = "pwrseq-qcom_wcn",
+ .of_match_table = pwrseq_qcom_wcn_of_match,
+ },
+ .probe = pwrseq_qcom_wcn_probe,
+};
+module_platform_driver(pwrseq_qcom_wcn_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Qualcomm WCN PMU power sequencing driver");
+MODULE_LICENSE("GPL");
--
2.43.0
