The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.
Fixes: 22b82135c02d ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 3de7565dda19..f4b47e6b3a2f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -537,7 +537,7 @@ &uart21 {
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_0_eusb2_repeater>;
@@ -545,6 +545,9 @@ &usb_1_ss0_hsphy {
};
&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
status = "okay";
};
@@ -558,7 +561,7 @@ &usb_1_ss0_dwc3 {
&usb_1_ss1_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_1_eusb2_repeater>;
@@ -566,6 +569,9 @@ &usb_1_ss1_hsphy {
};
&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
status = "okay";
};
@@ -579,7 +585,7 @@ &usb_1_ss1_dwc3 {
&usb_1_ss2_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
+ vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_2_eusb2_repeater>;
@@ -587,6 +593,9 @@ &usb_1_ss2_hsphy {
};
&usb_1_ss2_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
status = "okay";
};
--
2.34.1
